Click on the column header to sort by that column.
The background color indicates the section of the reader:
| supported | should work | unsupported |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | note |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ACS![]() | CCID USB Reader | ![]() | 0x072F | 0x90CC | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 2 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | ACS![]() | ACR122U PICC Interface | ![]() | 0x072F | 0x2200 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 256 | 0x00000000 | 0x00000000 | 0x00020040 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ['contactless'] | Time extension requests are not supported. Firmwares version < 2.06 are bogus: APDU with 0x7B (123) bytes expected do not work with a 14443 card. The reader returns SW=63 00 instead. |
| 3 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | ACS![]() | ACR38 USB Reader | ![]() | 0x072F | 0x90CC | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Old versions of this reader are bogus: the reader do timeout when a special USB frame is sent from the reader. If the frame size is a multiple of wMaxPacketSize the communication is stopped. | |
| 4 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ACS![]() | CCID USB Reader | ![]() | 0x072F | 0x90CC | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 5 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ACS![]() | CCID USB Reader | ![]() | 0x072F | 0x90CC | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 6 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Athena![]() | ASEDrive CCID | ![]() | 0x0DC3 | 0x1102 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | Firmware older than 6.07 is bogus |
| 7 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Athena![]() | ASEDrive CCID | ![]() | 0x0DC3 | 0x1004 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 8 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL![]() | AT91SC192192CT-USB ICCD reader | ![]() | 0x03EB | 0x600B | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 9 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL![]() | AT91SO CCID Smart Card Reader | ![]() | 0x03EB | 0x6004 | 3 | 1.10 | 0x01 | 0x07 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 256 | 0x00000000 | 0x00000000 | 0x0002005E | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x00 | 1 | ||
| 10 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL![]() | AT98SC032CT-USB | ![]() | 0x03EB | 0x6009 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 11 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Alcor Micro![]() | AU9520 | ![]() | 0x058F | 0x9520 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Firmware 1.01 is bogus. The time request sent by the card is not forwarded by the reader to the host. | |
| 12 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | ActivCard![]() | ActivCard USB Reader V2 | ![]() | 0x09C3 | 0x0008 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | The reader do timeout when a special USB frame is sent from the reader. If the frame size if a multiple of wMaxPacketSize the communication is stopped. Some users report that this reader is in fact a SCR-331 with a different firmware and that you can upgrade its firmware to transform it into a (supported) SCR-331 reader. | |
| 13 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | ActivCard![]() | ActivCard USB Reader V3 | ![]() | 0x09C3 | 0x0013 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 14 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | ActivIdentity![]() | Activkey Sim | ![]() | 0x09C3 | 0x0014 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 15 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Aktiv![]() | Rutoken ECP | ![]() | 0x0A89 | 0x0030 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 16 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Aktiv Co., ProgramPark![]() | Rutoken Magistra | ![]() | 0x0A89 | 0x0060 | 0 | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 17 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | Aladdin![]() | Token JC | ![]() | 0x0529 | 0x0620 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 49 | 0x00000000 | 0x00000000 | 0x0001023C | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The token does not work after a warm reset. See http://www.opensc-project.org/pipermail/opensc-devel/2009-April/012128.html | |
| 18 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Alcor Micro![]() | SCR001 | ![]() | 0x058F | 0x9520 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 19 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | COVADIS![]() | ALYA | ![]() | 0x0982 | 0x0007 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 20 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Axalto![]() | Reflex USB v3 | ![]() | 0x04E6 | 0x511C | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 21 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | BLUTRONICS![]() | BLUDRIVE II CCID | ![]() | 0x1B0E | 0x1078 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x00010130 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 22 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | Broadcom Corp![]() | 5880 | ![]() | 0x0A5C | 0x5800 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | found in Dell E6500 laptop No communication to the device ("Resource temporarily unavailable" error) The reader reports "Hardware error" to GetSlotStatus when no card is present. | |
| 23 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | C3PO![]() | USB SMART CARD KEYBOARD | ![]() | 0x0783 | 0x0009 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 24 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | C3PO![]() | USB SMART CARD READER | ![]() | 0x0783 | 0x0010 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 25 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | C3PO![]() | USB SMART CARD KEYBOARD | ![]() | 0x0783 | 0x0007 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000001 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 26 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | id3 Semiconductors![]() | Contactless Reader | ![]() | 0x0B81 | 0x0200 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 27 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY![]() | CardMan 1021 | ![]() | 0x076B | 0x1021 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.692 MHz | 3.692 MHz | 9924 bps | 317591 bps | 254 | 0x00000007 | 0x00000000 | 0x000103B1 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 28 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG![]() | CardMan 3021 | ![]() | 0x076B | 0x3021 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 29 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | OMNIKEY AG![]() | CardMan 3121 | ![]() | 0x076B | 0x3021 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.000 MHz | 12.000 MHz | 8065 bps | 96774 bps | 254 | 0x00000007 | 0x00000000 | 0x000205B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 30 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG![]() | CardMan 3621 | ![]() | 0x076B | 0x3621 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 31 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG![]() | CardMan 3821 | ![]() | 0x076B | 0x3821 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 32 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY![]() | CardMan 4321 | ![]() | 0x076B | 0x4321 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ExpressCard'] | |
| 33 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG![]() | CardMan 5121 | ![]() | 0x076B | 0x5121 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | The RFID interface is not supported. |
| 34 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG![]() | CardMan 5125 | ![]() | 0x076B | 0x5125 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | The HID PROX interface is not supported. |
| 35 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY![]() | CardMan 5321 | ![]() | 0x076B | 0x5321 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | The RFID interface is not supported. |
| 36 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG![]() | CardMan 6121 | ![]() | 0x076B | 0x6622 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 37 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | charismathics![]() | plug'n'crypt CCID token | ![]() | 0x19E7 | 0x0002 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 38 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Cherry GmbH![]() | SmartTerminal XX44 | ![]() | 0x046A | 0x002D | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 39 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Cherry GmbH![]() | SmartBoard XX1X | ![]() | 0x046A | 0x005B | 3 | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 40 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Cherry GmbH![]() | SmartTerminal XX1X | ![]() | 0x046A | 0x0070 | 3 | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 41 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Cherry GmbH![]() | SmartTerminal ST-1275 | ![]() | 0x046A | 0x0072 | 3 | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | The contactless interface is not supported. |
| 42 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Cherry GmbH![]() | SmartBoard XX33 | ![]() | 0x046A | 0x0005 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0 | 0 | 0x0000 | 0x01 | 1 | ['PIN Verification'] | |
| 43 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Cherry GmbH![]() | SmartBoard XX44 | ![]() | 0x046A | 0x0010 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 44 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron![]() | CryptoIdentity CCID | ![]() | 0x073D | 0x0007 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 45 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Dell![]() | Dell Smart Card Reader Keyboard | ![]() | 0x413C | 0x2101 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | ['PIN Verification'] | |
| 46 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron![]() | CryptoIdentity CCID | ![]() | 0x073D | 0x0008 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 47 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron![]() | Digipass 860 | ![]() | 0x073D | 0x0B00 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 48 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron![]() | Card Reader | ![]() | 0x073D | 0x0C01 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 49 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Feitian![]() | CCID Smart Card 301 | ![]() | 0x096E | 0x0503 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 600000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 50 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Fujitsu Siemens Computers![]() | SmartCard Keyboard USB 2A | ![]() | 0x0BF8 | 0x1005 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 51 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Fujitsu Siemens Computers![]() | SmartCard USB 2A | ![]() | 0x0BF8 | 0x1006 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 52 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto![]() | GemCore SIM Pro Smart Card Reader | ![]() | 0x08E6 | 0x3480 | 3 | 1.00 | 0x01 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 53 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto![]() | Gemplus USB SmartCard Reader 433-Swap | ![]() | 0x08E6 | 0x4433 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0 | 0 | 0x0000 | 0x00 | 1 | ||
| 54 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto![]() | USB Shell Token V2 | ![]() | 0x08E6 | 0x3438 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 55 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto![]() | USB GemPCPinpad SmartCard Reader | ![]() | 0x08E6 | 0x3478 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | Known problems/limitations: Does not support minimum PIN length (wPINMaxExtraDigit) lower than 4 Does not support maximum PIN length (wPINMaxExtraDigit) greater than 8 Does send a VERIFY PIN command with an empty PIN to get the number of remaining trials. This may be problematic with some smart cards like the Belgian eID card that does not support this and will decrement the counter |
| 56 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto![]() | PC Twin Reader | ![]() | 0x08E6 | 0x3437 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 57 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto![]() | PC Twin Reader (serial) | ![]() | 0x08E6 | 0x3437 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ['serial'] | |
| 58 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto![]() | USB GemPC Express | ![]() | 0x08E6 | 0x34EC | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ['ExpressCard'] | |
| 59 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto![]() | Prox Dual USB PC LinkReader | ![]() | 0x08E6 | 0x5503 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 60 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto![]() | Prox Dual USB PC LinkReader | ![]() | 0x08E6 | 0x5503 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 278 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 61 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto![]() | Prox SU USB PC LinkReader | ![]() | 0x08E6 | 0x5504 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 62 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto![]() | Prox SU USB PC LinkReader | ![]() | 0x08E6 | 0x5504 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 278 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 63 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto![]() | Smart Enterprise Guardian Secure USB Device | ![]() | 0x08E6 | 0x8000 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 7.500 MHz | 20112 bps | 223200 bps | 252 | 0x00000000 | 0x00000000 | 0x0001007A | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 64 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto![]() | PDT | ![]() | 0x0973 | 0x1227 | 0 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 65 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Giesecke & Devrient GmbH![]() | Star Sign Card Token 350 (ICCD) | ![]() | 0x1059 | 0x000C | 1 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 280 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 66 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Giesecke & Devrient GmbH![]() | Star Sign Card Token 550 (ICCD) | ![]() | 0x1059 | 0x000D | 1 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 67 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Hewlett-Packard Company![]() | HP USB Smart Card Keyboard | ![]() | 0x03F0 | 0x1024 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 68 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc.![]() | HP USB Smartcard Reader | ![]() | 0x03F0 | 0x0824 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 69 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Hewlett Packard![]() | MFP Smart Card Reader | ![]() | 0x03F0 | 0x2924 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 70 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Philips Semiconductors![]() | JCOP41V221 | ![]() | 0x0471 | 0x040F | 0 | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 71 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | KOBIL![]() | KAAN Advanced | ![]() | 0x0D46 | 0x3002 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 432 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | Firmware older than 0.37 is bogus |
| 72 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | KOBIL![]() | KAAN Base | ![]() | 0x0D46 | 0x3001 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 432 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Firwmare older than 0.37 is bogus | |
| 73 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | KOBIL![]() | KAAN SIM III | ![]() | 0x0D46 | 0x3003 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 74 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | KEBTechnology![]() | KONA USB SmartCard | ![]() | 0x04CC | 0x5072 | 1 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00000840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 75 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | KOBIL![]() | KOBIL Class 3 Reader | ![]() | 0x0D46 | 0x3010 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 2.000 MHz | 4.000 MHz | 10573 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 536 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 76 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | C3PO![]() | LTC3x USB | ![]() | 0x0783 | 0x0003 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00010002 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The reader works fine with Linux kernel 2.4 but does not with Linux kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument). This reader is not more sold and replaced by the LTC31v2 model. | |
| 77 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | C3PO![]() | USB SMART CARD READER | ![]() | 0x0783 | 0x0006 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000001 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | New model with USB product ID 0x0006 | |
| 78 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Lenovo![]() | Integrated Smart Card Reader | ![]() | 0x17EF | 0x1003 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 79 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Generic![]() | USB2.0-CRW | ![]() | 0x0BDA | 0x0161 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 80 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Neowave![]() | Weneo | ![]() | 0x1E0D | 0x8033 | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 81 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Neowave![]() | Weneo | ![]() | 0x1E0D | 0x0013 | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 82 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG![]() | Smart Card Reader | ![]() | 0x076B | 0xA021 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.692 MHz | 3.692 MHz | 9924 bps | 119096 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 83 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | O2![]() | O2Micro CCID SC Reader | ![]() | 0x0B97 | 0x7762 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops like the Dell D420 or D820. The ATR may be corrupted by a 90 00 at the end | |
| 84 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | O2![]() | O2Micro CCID SC Reader | ![]() | 0x0B97 | 0x7772 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops. | |
| 85 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Panasonic![]() | Panasonic USB Smart Card Reader 7A-Smart | ![]() | 0x04DA | 0x117A | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 86 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Philips Semiconductors![]() | SmartMX Sample | ![]() | 0x04B9 | 0x1400 | 1 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | used in some SafeNet iKey 4000 |
| 87 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Precise Biometrics![]() | Precise 200 MC | ![]() | 0x08C3 | 0x0402 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 7.500 MHz | 10753 bps | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 65550 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware | |
| 88 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Precise Biometrics![]() | Precise 250 MC | ![]() | 0x08C3 | 0x0401 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 7.500 MHz | 10753 bps | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 65550 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware | |
| 89 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Raritan![]() | D2CIM-DVUSB VM/CCID | ![]() | 0x14DD | 0x1006 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010238 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 90 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc.![]() | SCRx31 USB Smart Card Reader | ![]() | 0x04E6 | 0xE001 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. | |
| 91 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc.![]() | SCR3310 USB Smart Card Reader | ![]() | 0x04E6 | 0x5116 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 92 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc.![]() | SCR3311 USB Smart Card Reader | ![]() | 0x04E6 | 0x511D | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 93 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SCM Microsystems Inc.![]() | SCR3320 - Smart Card Reader | ![]() | 0x04E6 | 0x5117 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 94 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SCM Microsystems Inc.![]() | SCR33x USB Smart Card Reader | ![]() | 0x04E6 | 0x5113 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 95 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SCM Microsystems Inc.![]() | SCR3340 - ExpressCard54 Smart Card Reader | ![]() | 0x04E6 | 0x5119 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ExpressCard'] | |
| 96 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc.![]() | SCR33x USB Smart Card Reader | ![]() | 0x04E6 | 0x5115 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. | |
| 97 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc.![]() | SCR35xx USB Smart Card Reader | ![]() | 0x04E6 | 0x5410 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 98 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron![]() | SIM Reader | ![]() | 0x073D | 0x0C00 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 99 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Sitecom![]() | Sitecom USB simcard reader MD-010 | ![]() | 0x0DF6 | 0x800A | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 100 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SMART![]() | SBV280 | ![]() | 0x0B8C | 0x000E | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 101 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Softforum Co., Ltd![]() | XecureHSM | ![]() | 0x04E8 | 0x0007 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 102 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard![]() | CSB6 Basic | ![]() | 0x1C34 | 0x7121 | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 103 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard![]() | CSB6 Secure | ![]() | 0x1C34 | 0x7123 | 3 | 1.10 | 0x02 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 104 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard![]() | CSB6 Ultimate | ![]() | 0x1C34 | 0x7124 | 3 | 1.10 | 0x04 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 105 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard![]() | CrazyWriter | ![]() | 0x1C34 | 0x7113 | 3 | 1.10 | 0x02 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 106 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard![]() | EasyFinger Standard | ![]() | 0x1C34 | 0x7136 | 3 | 1.10 | 0x01 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 107 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard![]() | EasyFinger Ultimate | ![]() | 0x1C34 | 0x7138 | 3 | 1.10 | 0x03 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 108 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard![]() | Prox'N'Roll | ![]() | 0x1C34 | 0x7141 | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 109 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SYNNIX![]() | STD200 | ![]() | 0x1206 | 0x2105 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 110 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | XIRING![]() | Teo | ![]() | 0x076B | 0xA022 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 111 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | TianYu CCID Key![]() | TianYu CCID SmartKey | ![]() | 0xA625 | 0x0801 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 115200 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 512 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 112 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Todos![]() | Argos Mini II | ![]() | 0x0B0C | 0x0050 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Use at least firmware 1.01. The previous one is bogus. | |
| 113 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VMware![]() | Virtual USB CCID | ![]() | 0x0E0F | 0x0004 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x0002004E | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 114 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Validy![]() | TokenA sl vt | ![]() | 0x1CF0 | 0x0001 | 2 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 1024 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 115 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO![]() | DP905 | ![]() | 0x1A44 | 0x0001 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 116 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | COVADIS![]() | VEGA-ALPHA | ![]() | 0x0982 | 0x0008 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 117 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Winbond![]() | CCID SmartCard Controller | ![]() | 0x0416 | 0x3815 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 3.000 MHz | 3.000 MHz | 8065 bps | 32258 bps | 123 | 0x00000000 | 0x00000000 | 0x000004B2 | 138 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 118 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | XIRING![]() | XI-SIGN USB V2 | ![]() | 0x0F14 | 0x0011 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.600 MHz | 3.600 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x020C | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 119 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | XIRING![]() | XI-SIGN USB V2 | ![]() | 0x0F14 | 0x0011 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.600 MHz | 3.600 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x020C | 0x00 | 1 | ||
| 120 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | THRC![]() | USB Smart Card Reader | ![]() | 0x062D | 0x0001 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | also known as ID-SMID01 and maybe other commercial names PPS fails with a Cryptoflex card Powerup fails with a Setcos card | |
| 121 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Generic![]() | USB2.0-CRW | ![]() | 0x0BDA | 0x0169 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 122 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | id3 Semiconductors![]() | Contactless Reader | ![]() | 0x0B81 | 0x0220 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 123 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | id3 Semiconductors![]() | Contactless Reader | ![]() | 0x0B81 | 0x0200 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 124 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | jNet Technology inc.![]() | jToken s1 | ![]() | 0x0483 | 0x2010 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00010840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 125 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | KOBIL Systems![]() | mIDentity M | ![]() | 0x0D46 | 0x4000 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Time requests are not managed correctly and make the firmware fails. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | |
| 126 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | KOBIL Systems![]() | mIDentity XL | ![]() | 0x0D46 | 0x4001 | 2 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Time requests are not managed correctly and make the firmware fails. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | |
| 127 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | RSA![]() | RSA SecurID (R) Authenticator | ![]() | 0x15E1 | 0x2007 | 3 | 1.00 | 0x00 | 0x02 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010238 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 128 | 0xFF | supported | Cherry GmbH![]() | SmartTerminal ST-2xxx | ![]() | 0x046A | 0x003E | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 129 | 0xFF | supported | Dell![]() | Dell USB Smartcard Keyboard | ![]() | 0x413C | 0x2100 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | ['PIN Verification'] | |
| 130 | 0xFF | shouldwork | Gemalto![]() | Gem e-Seal Pro USB Token | ![]() | 0x08E6 | 0x2202 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 131 | 0xFF | supported | MYSMART![]() | MySMART PAD V2.0 | ![]() | 0x09BE | 0x0002 | 3 | 1.00 | 0x00 | 0x00 | 0x0000 0x0300 | 1024.000 MHz | 1024.000 MHz | 10752 bps | 129032 bps | 0 | 0x00000000 | 0x03000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 132 | 0xFF | shouldwork | OCS ID-One Cosmo Card![]() | USB Smart Chip Device | ![]() | 0x1A74 | 0x6354 | 0 | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 133 | 0xFF | unsupported | OCS ID-One Cosmo Card![]() | USB Smart Chip Device | ![]() | 0x1A74 | 0x6356 | 0 | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | the reader responds with bResponseType not defined in ICCD v1.0 specification. See http://archives.neohapsis.com/archives/dev/muscle/2009-q4/0059.html |
| 134 | 0xFF | unsupported | Reiner-SCT![]() | cyberJack pinpad(a) | ![]() | 0x0C4B | 0x0300 | 3 | 10.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10072 bps | 250000 bps | 254 | 0x00000007 | 0x00000000 | 0x00010030 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | Time requests are not managed and the driver may time out without any response from the reader. This is not a problem unless you use a time-consuming APDU like RSA key generation. Reiner provides a free software driver for this reader: http://support.reiner-sct.de/ |
| 135 | 0xFF | unsupported | SCM Microsystems Inc.![]() | SCL010 Contactless Reader | ![]() | 0x04E6 | 0x5291 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 13.560 MHz | 13.560 MHz | 106000 bps | 848000 bps | 254 | 0x00000000 | 0x00000001 | 0x0001007E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 136 | 0xFF | shouldwork | SCM Microsystems Inc.![]() | SCR331-DI USB Smart Card Reader | ![]() | 0x04E6 | 0x5120 | 3 | 1.00 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 255 | 255 | 0x0000 | 0x00 | 1 | ['contactless'] | The contactless interface is not supported. |
| 137 | 0xFF | supported | SCM Microsystems Inc.![]() | SCR331-DI USB Smart Card Reader | ![]() | 0x04E6 | 0x5111 | 3 | 1.00 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | You have to upgrade the firmware using version 5.18 or later. The contactless interface is not supported. |
| 138 | 0xFF | shouldwork | SCM Microsystems Inc.![]() | SDI010 Smart Card Reader | ![]() | 0x04E6 | 0x5121 | 3 | 1.10 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | The contactless interface is not supported. |
| 139 | 0xFF | supported | SCM Microsystems Inc.![]() | SPRx32 USB Smart Card Reader | ![]() | 0x04E6 | 0xE003 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 254 | 0x00000000 | 0x00000000 | 0x000100BA | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | You have to upgrade the firmware using version 5.10 or later. |
| 140 | 0xFF | supported | Verisign![]() | Token GEM USB COMBI-M | ![]() | 0x08E6 | 0x1359 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 141 | 0xFF | supported | Verisign![]() | Token GEM USB COMBI | ![]() | 0x08E6 | 0xACE0 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0 | 0 | 0x0000 | 0x00 | 1 | ||
| 142 | 0xFF | shouldwork | SchlumbergerSema![]() | SchlumbergerSema Cyberflex Access | ![]() | 0x0973 | 0x0003 | 0 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00000840 | 256 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] |
Generated: Wed Dec 16 13:44:10 2009
Ludovic Rousseau