| supported | should work | unsupported | disabled |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | ACS | ACR 38U-CCID | ![]() | 0x072F | 0x90CC | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Old versions of this reader are bogus: the reader do timeout when a special USB frame is sent from the reader. If the frame size is a multiple of wMaxPacketSize the communication is stopped. | 1.0.0 | ||
| 2 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Athena | ASEDrive IIIe KB | ![]() | 0x0DC3 | 0x1102 | 4 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Firmware older than 6.07 is bogus | 1.0.1 | |
| 3 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Athena | ASE IIIe | ![]() | 0x0DC3 | 0x1004 | 4 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 4 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Alcor Micro | AU9520 | ![]() | 0x058F | 0x9520 | 0 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | Firmware 1.01 is bogus. The time request sent by the card is not forwarded by the reader to the host. | 1.1.0 | |
| 5 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Alcor Micro | AU9540 | ![]() | 0x058F | 0x9540 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.5 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 6 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | ActivIdentity | USB Reader V3 | ![]() | 0x09C3 | 0x0013 | CCID Interface | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 7 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | ActivIdentity | Activkey Sim | ![]() | 0x09C3 | 0x0014 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.1.0 | |||
| 8 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | COVADIS | ALYA | ![]() | 0x0982 | 0x0007 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | 1.3.6 | ||
| 9 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | OMNIKEY AG | CardMan 3121 | ![]() | 0x076B | 0x3021 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.000 MHz | 12.000 MHz | 8065 bps | 96774 bps | 254 | 0x00000007 | 0x00000000 | 0x000205B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 0.1.0 | ||
| 10 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Cherry GmbH | SmartTerminal XX44 | ![]() | 0x046A | 0x002D | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 0.9.4 | ||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 11 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Cherry GmbH | SmartBoard XX33 | ![]() | 0x046A | 0x0005 | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0 | 0 | 0x0000 | 0x01 | 1 | PIN Verification | No extended APDU | 0.9.0 | |
| 12 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Cherry GmbH | SmartBoard XX44 | ![]() | 0x046A | 0x0010 | 4 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 0.9.3 | |
| 13 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron | CryptoIdentity CCID | ![]() | 0x073D | 0x0007 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 14 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Dell | Dell Smart Card Reader Keyboard | ![]() | 0x413C | 0x2101 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | PIN Verification | Seems to support SPE only if the VERIFY command has a fixed length. See http://www.opensc-project.org/pipermail/opensc-devel/2011-May/016726.html | 0.9.0 | |
| 15 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron | CryptoIdentity CCID | ![]() | 0x073D | 0x0008 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 16 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron | Digipass 860 | ![]() | 0x073D | 0x0B00 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 17 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron | Card Reader | ![]() | 0x073D | 0x0C00 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The device contains a hub with 3 devices: 2 CCID card readers and a USB Mass storage | 1.4.2 | ||
| 18 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron | SIM Reader | ![]() | 0x073D | 0x0C00 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The device contains a hub with 3 devices: 2 CCID card readers and a USB Mass storage | 1.4.2 | ||
| 19 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Eutron | Smart Pocket | ![]() | 0x073D | 0x0C01 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 20 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Feitian | ePass2003 | ![]() | 0x096E | 0x0807 | ? | 2 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 2048 | 0x00000000 | 0x00000000 | 0x00040840 | 2100 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.4.3 | ||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 21 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | GemCore SIM Pro Smart Card Reader | ![]() | 0x08E6 | 0x3480 | 0 | 3 | 1.00 | 0x01 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 2 slots | 1.0.0 | ||
| 22 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | Gemplus USB SmartCard Reader 433-Swap | ![]() | 0x08E6 | 0x4433 | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0 | 0 | 0x0000 | 0x00 | 1 | No extended APDU | 0.1.0 | ||
| 23 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | USB Shell Token V2 | ![]() | 0x08E6 | 0x3438 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.1.0 | |||
| 24 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | USB GemPCPinpad SmartCard Reader | ![]() | 0x08E6 | 0x3478 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Known problems/limitations: Does not support minimum PIN length (wPINMaxExtraDigit) lower than 4 Does not support maximum PIN length (wPINMaxExtraDigit) greater than 8 Does send a VERIFY PIN command with an empty PIN to get the number of remaining trials. This may be problematic with some smart cards like the Belgian eID card that does not support this and will decrement the counter | 1.0.0 | |
| 25 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | PC Twin Reader | ![]() | 0x08E6 | 0x3437 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | serial | 0.1.0 | ||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 26 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | Prox Dual USB PC LinkReader | ![]() | 0x08E6 | 0x5503 | Prox-DU Contact interface | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader, contactless | 1.4.2 | ||
| 27 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | Prox Dual USB PC LinkReader | ![]() | 0x08E6 | 0x5503 | Prox-DU Contactless interface | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 278 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader, contactless | No extended APDU | 1.4.2 | |
| 28 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | Prox SU USB PC LinkReader | ![]() | 0x08E6 | 0x5504 | Prox-SU Contact interface | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader, contactless | 1.4.2 | ||
| 29 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | Prox SU USB PC LinkReader | ![]() | 0x08E6 | 0x5504 | Prox-SU Contactless interface | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 278 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader, contactless | No extended APDU | 1.4.2 | |
| 30 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | Smart Enterprise Guardian Secure USB Device | ![]() | 0x08E6 | 0x8000 | 4 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 7.500 MHz | 20112 bps | 223200 bps | 252 | 0x00000000 | 0x00000000 | 0x0001007A | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.2 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 31 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | EZIO CB+ | ![]() | 0x08E6 | 0x34C3 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.4 | ||
| 32 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | Ezio Shield | ![]() | 0x08E6 | 0x34C0 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.4 | ||
| 33 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Gemalto | PDT | ![]() | 0x08E6 | 0x1227 | ICCD | 0 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.9 | |
| 34 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Giesecke & Devrient GmbH | StarSign Crypto USB Token | ![]() | 0x1059 | 0x0017 | ? | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 35 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc. | HP USB Smartcard Reader | ![]() | 0x03F0 | 0x0824 | 4 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 36 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | KOBIL | KAAN Advanced | ![]() | 0x0D46 | 0x3002 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 432 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Firmware older than 0.37 is bogus | 0.9.3 | |
| 37 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | KOBIL | KAAN Base | ![]() | 0x0D46 | 0x3001 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 432 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Firwmare older than 0.37 is bogus | 0.9.3 | ||
| 38 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | KOBIL | KAAN SIM III | ![]() | 0x0D46 | 0x3003 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 0.9.3 | ||
| 39 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | KOBIL | EMV CAP - SecOVID Reader III | ![]() | 0x0D46 | 0x3010 | ? | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 2.000 MHz | 4.000 MHz | 10573 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 536 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.1 | ||
| 40 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | C3PO | LTC31 v2 | ![]() | 0x0783 | 0x0006 | ? | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | New model with USB product ID 0x0006 | 1.1.0 | ||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 41 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Lenovo | Integrated Smart Card Reader | ![]() | 0x17EF | 0x1003 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 42 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | Precise Biometrics | Sense MC | ![]() | 0x076B | 0xA022 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | biometric | No extended APDU | 1.4.5 | |
| 43 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc. | SCR 331 | ![]() | 0x04E6 | 0xE001 | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. | 0.1.0 | ||
| 44 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc. | SCR 3310 | ![]() | 0x04E6 | 0x5116 | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 0.9.3 | |||
| 45 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc. | SCR 3311 | ![]() | 0x04E6 | 0x511D | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 46 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | SCM Microsystems Inc. | SCR 355 | ![]() | 0x04E6 | 0x5410 | 4 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 47 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | XIRING | Teo | ![]() | 0x076B | 0xA022 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.2.0 | ||
| 48 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | TianYu CCID Key | TianYu CCID SmartKey | ![]() | 0xA625 | 0x0801 | 0 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 115200 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 512 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| 49 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | XIRING | Leo v2 | ![]() | 0x0F14 | 0x0038 | ? | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.1 | |
| 50 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | XIRING | MyLeo | ![]() | 0x0F14 | 0x0037 | ? | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 522 bytes | 0xFF | 0xFF | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.2 | |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 51 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | XIRING | XI-SIGN USB V2 | ![]() | 0x0F14 | 0x0011 | 0 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.600 MHz | 3.600 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.9 | |
| 52 | 0x0B [Chip Card Interface Device Class (CCID)] | supported | id3 Semiconductors | CL1356T | ![]() | 0x0B81 | 0x0200 | 0 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 53 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ACS | ACR122U | ![]() | 0x072F | 0x90CC | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.5 | |||
| 54 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ACS | ACR100 | ![]() | 0x072F | 0x90CC | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 55 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ACS | ACR101 ICC Reader | ![]() | 0x072F | 0x1204 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | SVN | ||||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 56 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ACS | ACR38 plugin | ![]() | 0x072F | 0x90CC | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 57 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ACS | AET65 | ![]() | 0x072F | 0x90CC | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 58 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ACS | APG8201 PINhandy 1 | ![]() | 0x072F | 0x8201 | ? | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.2 | ||
| 59 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL | AT90SCR050 | ![]() | 0x03EB | 0x6011 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344064 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 60 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL | AT90SCR100 | ![]() | 0x03EB | 0x6010 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344064 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 61 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL | AT91SC192192CT-USB ICCD reader | ![]() | 0x03EB | 0x600B | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.11 | |
| 62 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL | AT91SO CCID Smart Card Reader | ![]() | 0x03EB | 0x6004 | 0 | 3 | 1.10 | 0x01 | 0x07 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 256 | 0x00000000 | 0x00000000 | 0x0002005E | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x00 | 1 | 2 slots | No extended APDU | 1.3.9 | |
| 63 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL | AT98SC032CT-USB | ![]() | 0x03EB | 0x6009 | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| 64 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL | VaultIC420 Smart Object | ![]() | 0x03EB | 0x6012 | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 65 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL | VaultIC440 | ![]() | 0x03EB | 0x6014 | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 66 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ATMEL | VaultIC460 | ![]() | 0x03EB | 0x6016 | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 67 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Akasa | AK-CR-03 | ![]() | 0x058F | 0x9520 | ? | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.1 | ||
| 68 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Aktiv | Rutoken ECP | ![]() | 0x0A89 | 0x0030 | 0 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.11 | |
| 69 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Aktiv | Rutoken lite | ![]() | 0x0A89 | 0x0025 | ? | 2 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.4.2 | |
| 70 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Aktiv Co., ProgramPark | Rutoken Magistra | ![]() | 0x0A89 | 0x0060 | 0 | 0 | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 71 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Alcor Micro | AU9522 | ![]() | 0x058F | 0x9522 | 3 | 1.00 | 0x01 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 2 slots | No extended APDU | Built in reader for the "Friio USB2.0 DTV Receiver" | SVN | |
| 72 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Alcor Micro | SCR001 | ![]() | 0x058F | 0x9520 | 0 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.11 | ||
| 73 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ASK-RFID | CPL108 | ![]() | 0x1FD3 | 0xCC1D | Contactless | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x000400FE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 74 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Athena | IDProtect Key v2 | ![]() | 0x0DC3 | 0x0900 | Main Interface | 2 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 252 | 0x00000000 | 0x00000000 | 0x0001023C | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Be to have a v2 token (bcdDevice: 2.00). The V1 token is bogus: PPS to set the card in T=1 fails. See http://www.opensc-project.org/pipermail/opensc-user/2010-May/004023.html | 1.3.12 | ||
| 75 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Avtor | SC Reader 371 | ![]() | 0x15CF | 0x001D | 3 | 10.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.571 MHz | 3.571 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 76 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Avtor | SecureToken | ![]() | 0x15CF | 0x0019 | 4 | 3 | 10.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.571 MHz | 3.571 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| 77 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Axalto | Reflex USB v3 | ![]() | 0x04E6 | 0x511C | 4 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.1 | |||
| 78 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | BIFIT | USB-Token iBank2key | ![]() | 0x23A0 | 0x0001 | ? | 2 | 1.00 | 0x00 | 0x07 | 0x0000 0x0002 | 5.000 MHz | 5.000 MHz | 13440 bps | 430107 bps | 254 | 0x00000000 | 0x00000000 | 0x000205B8 | 272 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.5 | ||
| 79 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | BIFIT | iBank2Key | ![]() | 0x23A0 | 0x0002 | iBank2Key | 0 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 64 | 0x00000000 | 0x00000000 | 0x00000840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.4.5 | ||
| 80 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | HDZB | uKeyCI800-K18 | ![]() | 0x1677 | 0x0025 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 81 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | BLUTRONICS | BLUDRIVE II CCID | ![]() | 0x1B0E | 0x1078 | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x00010130 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.3 | |||
| 82 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5800 | Contacted SmartCard | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | found in Dell E6500 laptop Update the reader firmware using http://support.dell.com/support/downloads/download.aspx?c=us&cs=555&l=en&s=biz&releaseid=R254263&SystemID=LAT_E6400&servicetag=&os=WLH&osl=en&deviceid=21505&devlib=0&typecnt=0&vercnt=5&catid=-1&impid=-1&formatcnt=0&libid=60&typeid=-1&dateid=-1&formatid=-1&fileid=372654 The previous firmware generated the following errors: No communication to the device ("Resource temporarily unavailable" error) The reader reports "Hardware error" to GetSlotStatus when no card is present. | 1.3.9 | ||
| 83 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5802 | Contacted SmartCard | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 84 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5802 | Contacted SmartCard | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader | 1.4.2 | ||
| 85 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5802 | Contactless SmartCard | 3 | 1.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 512 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader | No extended APDU | 1.4.2 | |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 86 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | C3PO | KBR36 | ![]() | 0x0783 | 0x0009 | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.2.0 | ||
| 87 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | C3PO | LTC32 | ![]() | 0x0783 | 0x0010 | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.2.0 | ||
| 88 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | C3PO | TLTC2USB | ![]() | 0x0783 | 0x0007 | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000001 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| 89 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | CCB | eSafeLD | ![]() | 0x8829 | 0xCCB2 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 1041 | 0x00000000 | 0x00000000 | 0x00040672 | 1041 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | ||||
| 90 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY | CardMan 1021 | ![]() | 0x076B | 0x1021 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.692 MHz | 3.692 MHz | 9924 bps | 317591 bps | 254 | 0x00000007 | 0x00000000 | 0x000103B1 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 91 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG | CardMan 3021 | ![]() | 0x076B | 0x3021 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.1.0 | ||
| 92 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG | CardMan 3621 | ![]() | 0x076B | 0x3621 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | Does not support minimum PIN length (wPINMaxExtraDigit) lower than 5 | 1.0.1 |
| 93 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG | CardMan 3821 | ![]() | 0x076B | 0x3821 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | Does not support minimum PIN length (wPINMaxExtraDigit) lower than 5 | 1.0.0 |
| 94 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY | CardMan 4321 | ![]() | 0x076B | 0x4321 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ExpressCard | No extended APDU | The reader may report a card present if no card is inserted. See https://bugzilla.redhat.com/show_bug.cgi?id=531998 | 1.3.0 |
| 95 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG | CardMan 5121 | ![]() | 0x076B | 0x5121 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The RFID interface is not supported. | 1.2.0 |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 96 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG | CardMan 5125 | ![]() | 0x076B | 0x5125 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The HID PROX interface is not supported. | 1.0.0 |
| 97 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY | CardMan 5321 | ![]() | 0x076B | 0x5321 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The RFID interface is not supported. | 1.3.1 |
| 98 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG | CardMan 6121 | ![]() | 0x076B | 0x6622 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.0.0 | ||
| 99 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | charismathics | plug'n'crypt CCID token | ![]() | 0x19E7 | 0x0002 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 100 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Cherry GmbH | SmartBoard XX1X | ![]() | 0x046A | 0x005B | 4 | 3 | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.5 | |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 101 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Cherry GmbH | SmartTerminal XX1X | ![]() | 0x046A | 0x0070 | 4 | 3 | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.9 | ||
| 102 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Cherry GmbH | SmartTerminal ST-1275 | ![]() | 0x046A | 0x0072 | Smart Card Reader CCID | 3 | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The contactless interface is not supported. | 1.3.12 |
| 103 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | COVADIS | Auriga | ![]() | 0x0982 | 0x0040 | 0 | 3 | 10.01 | 0x02 | 0x07 | 0x0000 0x0003 | 2.000 MHz | 2.000 MHz | 5376 bps | 21504 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 2 | biometric, 3 slots | No extended APDU | 1.3.12 | |
| 104 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Dectel | CI692 | ![]() | 0x0BDA | 0x0165 | Smart Card Reader Interface | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 105 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Feitian Technologies | FT SCR310 | ![]() | 0x096E | 0x0505 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 600000 bps | 248 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 0 | 1.4.2 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 106 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Free Software Initiative of Japan | Gnuk | ![]() | 0x234B | 0x0000 | ? | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 64 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 107 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Fujitsu Siemens Computers | SmartCard Keyboard USB 2A | ![]() | 0x0BF8 | 0x1005 | 4 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.0 | |
| 108 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Fujitsu Siemens Computers | SmartCard USB 2A | ![]() | 0x0BF8 | 0x1006 | 4 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.0 | |
| 109 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | FujitsuTechnologySolutions GmbH | SmartCase KB SCR eSIG | ![]() | 0x0BF8 | 0x1017 | SmartCase Smartcard Reader | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 307200 bps | 252 | 0x00000000 | 0x00000001 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.6 | ||
| 110 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | German Privacy Foundation | Crypto Stick v1.2 | ![]() | 0x20A0 | 0x4107 | 0 | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0002 | 3.600 MHz | 3.600 MHz | 9677 bps | 116129 bps | 254 | 0x00000000 | 0x00000000 | 0x000104BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 111 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemplus | GemCore POS Pro Smart Card Reader | ![]() | 0x08E6 | 0x3479 | 3 | 1.00 | 0x04 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 5 slots | 1.4.4 | |||
| 112 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto | USB GemPCPinpad SmartCard Reader | ![]() | 0x08E6 | 0x3478 | ? | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.13 | ||
| 113 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto | GemPC Express | ![]() | 0x08E6 | 0x34EC | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ExpressCard | 1.0.0 | ||
| 114 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto | Ezio Shield Branch Reader | ![]() | 0x08E6 | 0x34C5 | ? | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x000204B2 | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | SVN | |
| 115 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto | Ezio Shield | ![]() | 0x08E6 | 0x34C2 | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.5 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 116 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto | Hybrid Smartcard Reader | ![]() | 0x08E6 | 0x5743 | ? | 3 | 1.10 | 0x01 | 0x02 | 0x0000 0x0001 | 3.686 MHz | 3.686 MHz | 9910 bps | 9910 bps | 0 | 0x00000000 | 0x00000000 | 0x00010070 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 2 slots | 1.3.12 | ||
| 117 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto | SA .NET Dual | ![]() | 0x08E6 | 0x4042 | ? | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 1.500 MHz | 1.500 MHz | 4032 bps | 23437 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.5 | |||
| 118 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Gemalto | Smart Enterprise Guardian Secure USB Device | ![]() | 0x08E6 | 0x8108 | Smart Card Reader | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 2.000 MHz | 4.000 MHz | 5376 bps | 250000 bps | 252 | 0x00000000 | 0x00000000 | 0x0001007A | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 119 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Giesecke & Devrient GmbH | Star Sign Card Token 350 (ICCD) | ![]() | 0x1059 | 0x000C | 0 | 1 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 280 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| 120 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Giesecke & Devrient GmbH | Star Sign Card Token 550 (ICCD) | ![]() | 0x1059 | 0x000D | 0 | 1 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 121 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | GoldKey Security | PIV Token | ![]() | 0x19C8 | 0x0012 | 0 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020870 | 2048 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 122 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Hewlett Packard | MFP Smart Card Reader | ![]() | 0x03F0 | 0x2924 | 4 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.9 | |||
| 123 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Inside Secure | VaultIC 460 Smart Object | ![]() | 0x2406 | 0x6302 | ICCD 1.00 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.4.6 | |
| 124 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Philips Semiconductors | JCOP41V221 | ![]() | 0x0471 | 0x040F | 0 | 0 | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| 125 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | KEBTechnology | KONA USB SmartCard | ![]() | 0x04CC | 0x5072 | 0 | 1 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00000840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.6 | ||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 126 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Kingtrust | Multi-Reader | ![]() | 0x0483 | 0x0007 | ? | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 127 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | KOBIL Systems | Smart Token | ![]() | 0x0D46 | 0x3014 | ? | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412896 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 586 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 128 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | KOBIL Systems | mIDentity 4smart | ![]() | 0x0D46 | 0x4189 | ? | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 129 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | KOBIL Systems | mIDentity 4smart AES | ![]() | 0x0D46 | 0x41A9 | ? | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 130 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | KOBIL Systems | mIDentity fullsize | ![]() | 0x0D46 | 0x4389 | ? | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 131 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | KOBIL Systems | mIDentity fullsize AES | ![]() | 0x0D46 | 0x43A9 | ? | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 132 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | KOBIL Systems | mIDentity visual | ![]() | 0x0D46 | 0x4289 | ? | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 133 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | C3PO | LTC36 | ![]() | 0x0783 | 0x0036 | ? | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 134 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | MSI | StarReader SMART | ![]() | 0x0BDA | 0x0161 | Smart Card Reader Interface | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | You may need to unload/blacklist the mceusb Linux kernel driver to use the device. | 1.3.10 | ||
| 135 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Macally | NFC CCID eNetPad | ![]() | 0x08AE | 0x0BDF | Macally CCID READER | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 256 | 0x00000000 | 0x00000000 | 0x00020040 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 136 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | NXP | PR533 | ![]() | 0x1FC9 | 0x010B | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.685 MHz | 13.560 MHz | 9909 bps | 216960000 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 273 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | SVN | |||
| 137 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x8033 | 5 | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 138 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x0013 | 5 | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 139 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x0033 | Weneo Reader | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 140 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x1023 | Weneo SIM Reader | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x0001023A | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.3 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 141 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OBERTHUR TECHNOLOGIES | ID-ONE TOKEN SLIM v2 | ![]() | 0x1A74 | 0xB111 | ? | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 12.000 MHz | 12903 bps | 825807 bps | 252 | 0x00000000 | 0x00000000 | 0x00010200 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 142 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY | 6321 CLi USB | ![]() | 0x076B | 0x6321 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| 143 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | OMNIKEY AG | Smart Card Reader | ![]() | 0x076B | 0xA021 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.692 MHz | 3.692 MHz | 9924 bps | 119096 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.10 | ||
| 144 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Panasonic | Panasonic USB Smart Card Reader 7A-Smart | ![]() | 0x04DA | 0x117A | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 145 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Philips Semiconductors | SmartMX Sample | ![]() | 0x04B9 | 0x1400 | 0 | 1 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | used in some SafeNet iKey 4000 | 1.3.10 |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 146 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Raritan | D2CIM-DVUSB VM/CCID | ![]() | 0x14DD | 0x1006 | 18 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010238 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 147 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | REINER SCT | cyberJack RFID basis | ![]() | 0x0C4B | 0x9102 | ? | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 1.000 MHz | 1.000 MHz | 2688 bps | 2688 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B0 | 266 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 148 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SCM Microsystems Inc. | SCL01x Contactless Reader | ![]() | 0x04E6 | 0x5293 | SCL01x Contactless Reader | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000001 | 0x000404BE | 262 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | You have to upgrade the firmware using version 1.12 or later | 1.4.3 | |
| 149 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SCM Microsystems Inc. | SCR3310 USB Smart Card Reader | ![]() | 0x04E6 | 0x511F | CCID Interface | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 150 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SCM Microsystems Inc. | SCR3320 - Smart Card Reader | ![]() | 0x04E6 | 0x5117 | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 151 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SCM Microsystems Inc. | SCR33x USB Smart Card Reader | ![]() | 0x04E6 | 0x5113 | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 152 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SCM Microsystems Inc. | SCR3340 - ExpressCard54 Smart Card Reader | ![]() | 0x04E6 | 0x5119 | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ExpressCard | 1.0.0 | ||
| 153 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SCM Microsystems Inc. | SCR 335 | ![]() | 0x04E6 | 0x5115 | CCID Interface | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. Or use a v2.0 model. | 0.1.0 | ||
| 154 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SCM Microsystems Inc. | SCR35xx v2.0 USB SC Reader | ![]() | 0x04E6 | 0x5410 | CCID Interface | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 155 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Secure Device Solutions | DOMINO-Key TWIN | ![]() | 0x0B81 | 0x8007 | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 12.000 MHz | 12903 bps | 825807 bps | 252 | 0x00000000 | 0x00000000 | 0x00010200 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.5 | ||||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 156 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Sitecom | Sitecom USB simcard reader MD-010 | ![]() | 0x0DF6 | 0x800A | 0 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.0 | ||
| 157 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Softforum Co., Ltd | XecureHSM | ![]() | 0x04E8 | 0x0007 | 0 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 158 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard | CSB6 Basic | ![]() | 0x1C34 | 0x7121 | 0 | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.3.9 | |
| 159 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard | CSB6 Secure | ![]() | 0x1C34 | 0x7123 | 0 | 3 | 1.10 | 0x02 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 3 slots | No extended APDU | 1.3.9 | |
| 160 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard | CSB6 Ultimate | ![]() | 0x1C34 | 0x7124 | ? | 3 | 1.10 | 0x04 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 5 slots | No extended APDU | 1.3.9 | |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 161 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard | CrazyWriter | ![]() | 0x1C34 | 0x7113 | 0 | 3 | 1.10 | 0x02 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 3 slots | No extended APDU | 1.3.9 | |
| 162 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard | EasyFinger Standard | ![]() | 0x1C34 | 0x7136 | 0 | 3 | 1.10 | 0x01 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | No extended APDU | 1.3.9 | |
| 163 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard | EasyFinger Ultimate | ![]() | 0x1C34 | 0x7138 | 0 | 3 | 1.10 | 0x03 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 4 slots | No extended APDU | 1.3.9 | |
| 164 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SpringCard | Prox'N'Roll | ![]() | 0x1C34 | 0x7141 | 0 | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.3.9 | |
| 165 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | SYNNIX | STD200 | ![]() | 0x1206 | 0x2105 | 4 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 166 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Teridian Semiconductors | TSC12xxFV.09 | ![]() | 0x1862 | 0x0000 | ? | 3 | 1.00 | 0x04 | 0x03 | 0x0000 0x0003 | 3.600 MHz | 8.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000405F2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 5 | 5 slots | 1.4.6 | ||
| 167 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Tianyu | Smart Card Reader | ![]() | 0xA625 | 0x0810 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 168 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Todos | Argos Mini II | ![]() | 0x0B0C | 0x0050 | ? | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | Use at least firmware 1.01. The previous one is bogus. | 1.3.12 | |
| 169 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Todos | CX00 | ![]() | 0x0B0C | 0x0052 | ? | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x00 | 1 | No extended APDU | 1.4.0 | ||
| 170 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | ubisys | 13.56MHz RFID (CCID) | ![]() | 0x19A6 | 0x0009 | ? | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020042 | 288 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.4.5 | |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 171 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VMware | Virtual USB CCID | ![]() | 0x0E0F | 0x0004 | 0 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x0002004E | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.9 | |
| 172 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Validy | TokenA sl vt | ![]() | 0x1CF0 | 0x0001 | 0 | 2 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 1024 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.6 | |||
| 173 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DIGIPASS KEY 202 | ![]() | 0x1A44 | 0x0120 | ? | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 174 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DIGIPASS KEY 202 | ![]() | 0x1A44 | 0x0122 | ? | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 175 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DIGIPASS KEY 200 | ![]() | 0x1A44 | 0x0119 | ? | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 176 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DP855 | ![]() | 0x1A44 | 0x0855 | 3 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 177 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DIGIPASS KEY 860 | ![]() | 0x1A44 | 0x0117 | ? | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 178 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DP865 | ![]() | 0x1A44 | 0x0865 | 3 | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0818 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 179 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DP905 | ![]() | 0x1A44 | 0x0001 | 0 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.6 | ||
| 180 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DIGIPASS KEY 101 | ![]() | 0x1A44 | 0x0101 | ? | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 181 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DIGIPASS KEY 200 | ![]() | 0x1A44 | 0x0115 | 0 | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 182 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DIGIPASS KEY 860 | ![]() | 0x1A44 | 0x0112 | 0 | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 183 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | VASCO | DIGIPASS 920 | ![]() | 0x1A44 | 0x0920 | CCID | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.3 | ||
| 184 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | COVADIS | VEGA-ALPHA | ![]() | 0x0982 | 0x0008 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.6 | ||
| 185 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Winbond | CCID SmartCard Controller | ![]() | 0x0416 | 0x3815 | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 3.000 MHz | 3.000 MHz | 8065 bps | 32258 bps | 123 | 0x00000000 | 0x00000000 | 0x000004B2 | 138 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.1 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 186 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | XIRING | XI-SIGN USB V2 | ![]() | 0x0F14 | 0x0011 | 0 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.600 MHz | 3.600 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x020C | 0x00 | 1 | No extended APDU | 1.3.9 | ||
| 187 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Bit4id | cryptokey | ![]() | 0x25DD | 0x1201 | bit4CCID | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 188 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Bit4id | iAM | ![]() | 0x25DD | 0x2221 | bit4CCID | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 189 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Bit4id | CKey4 | ![]() | 0x25DD | 0x2321 | bit4CCID | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 190 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Bit4id | miniLector-s | ![]() | 0x25DD | 0x1101 | bit4CCID | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 191 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Bit4id | miniLector | ![]() | 0x25DD | 0x3111 | bit4CCID | 3 | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 192 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | Generic | USB2.0-CRW | ![]() | 0x0BDA | 0x0169 | 6 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 193 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | id3 Semiconductors | CL1356A_HID | ![]() | 0x0B81 | 0x0220 | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.7 | ||
| 194 | 0x0B [Chip Card Interface Device Class (CCID)] | shouldwork | id3 Semiconductors | CL1356T5 | ![]() | 0x0B81 | 0x0200 | ? | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 195 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | ACS | ACR122U PICC Interface | ![]() | 0x072F | 0x2200 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 256 | 0x00000000 | 0x00000000 | 0x00020040 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | contactless | No extended APDU | Time extension requests are not supported. Firmwares version < 2.06 are bogus: APDU with 0x7B (123) bytes expected do not work with a 14443 card. The reader returns SW=63 00 instead. | 1.3.9 |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 196 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | ActivCard | ActivCard USB Reader V2 | ![]() | 0x09C3 | 0x0008 | 4 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | The reader do timeout when a special USB frame is sent from the reader. If the frame size if a multiple of wMaxPacketSize the communication is stopped. Some users report that this reader is in fact a SCR-331 with a different firmware and that you can upgrade its firmware to transform it into a (supported) SCR-331 reader. | 1.0.0 | ||
| 197 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | Aladdin | eToken PRO USB 72K Java | ![]() | 0x0529 | 0x0620 | 4 | 3 | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 49 | 0x00000000 | 0x00000000 | 0x0001023C | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The token does not work after a warm reset. See http://www.opensc-project.org/pipermail/opensc-devel/2009-April/012128.html | 1.3.9 | ||
| 198 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5801 | Contacted SmartCard | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Found in Dell E6400 laptop The reader reports "Hardware error" to GetSlotStatus when no card is present. | 1.3.12 | ||
| 199 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | Feitian | SCR301 | ![]() | 0x096E | 0x0503 | ? | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 240 | 0x00000000 | 0x00000000 | 0x000102B8 | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | The reader fails with a CASE 2 APDU with Le=0 (256 bytes) Sent: 80 34 01 00 00 ifdhandler.c:1219:IFDHTransmitToICC() no name (lun: 0) commands.c:1542:CmdXfrBlockTPDU_T0() T=0: 5 bytes -> 000000 6F 05 00 00 00 00 07 00 00 00 80 34 01 00 00 <- 000000 80 00 00 00 00 00 07 40 FE 00 commands.c:1316:CCID_Receive Card absent or mute And time extension requests are not forwarded back to the host. A new version of the reader is available and may fix this issue. | 1.3.11 | ||
| 200 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | Hewlett-Packard Company | HP USB Smart Card Keyboard | ![]() | 0x03F0 | 0x1024 | 4 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | SECURITY ALERT: Martin P. reported that on Mac OS X the pinpad feature does not work correctly and the PIN code is sent to the host (instead of being kept secret by the pinpad) | 1.1.0 | |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 201 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | Hewlett-Packard Company | HP USB CCID Smartcard Keyboard | ![]() | 0x03F0 | 0x0036 | HP USB CCID Keyboard Smartcard Reader | 3 | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 307200 bps | 252 | 0x00000000 | 0x00000001 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | WARNING: Secure Pin Entry feature is bogus and has been disabled. firmware < 1.24 is bogus. SetParameters fails with a card of ATR 3B 16 96 41 73 74 72 69 64. The smart card reader part is from SCM. | 1.4.1 | |
| 202 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | C3PO | LTC3x USB | ![]() | 0x0783 | 0x0003 | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00010002 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The reader works fine with Linux kernel 2.4 but does not with Linux kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument). This reader is not more sold and replaced by the LTC31v2 model. | 0.1.0 | ||
| 203 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | O2 | Micro Oz776 | ![]() | 0x0B97 | 0x7762 | 0 | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops like the Dell D420 or D820. The ATR may be corrupted by a 90 00 at the end The reader is bogus and does not accept PPS | 0.9.3 | ||
| 204 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | O2 | Micro Oz776 | ![]() | 0x0B97 | 0x7772 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops. The reader is bogus and does not accept PPS | 1.3.1 | ||
| 205 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | Precise Biometrics | Precise 200 MC | ![]() | 0x08C3 | 0x0402 | ? | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 7.500 MHz | 10753 bps | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 65550 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html | 1.3.10 | |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 206 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | Precise Biometrics | Precise 250 MC | ![]() | 0x08C3 | 0x0401 | ? | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 7.500 MHz | 10753 bps | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 65550 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html | 1.3.6 | |
| 207 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | KOBIL Systems | mIDentity M | ![]() | 0x0D46 | 0x4000 | 0 | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | Time requests are not managed correctly and make the firmware fail. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | 0.9.3 | |
| 208 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | KOBIL Systems | mIDentity XL | ![]() | 0x0D46 | 0x4001 | 0 | 2 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Time requests are not managed correctly and make the firmware fail. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | 1.3.9 | ||
| 209 | 0x0B [Chip Card Interface Device Class (CCID)] | unsupported | RSA | RSA SecurID (R) Authenticator | ![]() | 0x15E1 | 0x2007 | MSD | 3 | 1.00 | 0x00 | 0x02 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 125000 bps | 254 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | the new firmware (revision 6284) fails to respond to initial CmdGetSlotStatus() with "ccid_usb.c:687:ReadUSB() read failed (5/2): -8 Success" or with "<- 000000 81 FB FF FF FF" "commands.c:1046:CmdGetSlotStatus() Not enough data received: 5 bytes" | 0.9.4 | ||
| 210 | 0x0B [Chip Card Interface Device Class (CCID)] | disabled | SMART | SBV280 | ![]() | 0x0B8C | 0x000E | CCID 1.1 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | Removed on manufacturer request. They use libusb directly in their own driver. | 1.3.12 |
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 211 | 0x0B [Chip Card Interface Device Class (CCID)] | disabled | THRC | USB Smart Card Reader | ![]() | 0x062D | 0x0001 | SCR Interface | 3 | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | also known as ID-SMID01, SCT018 and maybe other commercial names PPS fails with a Cryptoflex card Powerup fails with a Setcos card | 1.1.0 | ||
| 212 | 0x0B [Chip Card Interface Device Class (CCID)] | disabled | jNet Technology inc. | jToken s1 | ![]() | 0x0483 | 0x2010 | 0 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00010840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.9 | ||
| 213 | 0xFF | supported | Cherry GmbH | SmartTerminal ST-2xxx | ![]() | 0x046A | 0x003E | 4 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 0.9.4 | ||
| 214 | 0xFF | supported | Dell | keyboard SK-3106 | ![]() | 0x413C | 0x2100 | ????? | 3 | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | PIN Verification | 0.9.0 | ||
| 215 | 0xFF | supported | MYSMART | MySMART PAD V2.0 | ![]() | 0x09BE | 0x0002 | 0 | 3 | 1.00 | 0x00 | 0x00 | 0x0000 0x0300 | 1024.000 MHz | 1024.000 MHz | 10752 bps | 129032 bps | 0 | 0x00000000 | 0x03000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 216 | 0xFF | supported | SCM Microsystems Inc. | SCR 331-DI | ![]() | 0x04E6 | 0x5111 | 4 | 3 | 1.00 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | You have to upgrade the firmware using version 5.18 or later. The contactless interface is not supported. | 0.4.0 | |
| 217 | 0xFF | supported | SCM Microsystems Inc. | SPR 532 | ![]() | 0x04E6 | 0xE003 | 4 | 3 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 254 | 0x00000000 | 0x00000000 | 0x000100BA | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | You have to upgrade the firmware using version 5.10 or later. | 0.3.2 | |
| 218 | 0xFF | supported | Verisign | Secure Storage Token | ![]() | 0x08E6 | 0x1359 | 0 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 219 | 0xFF | supported | Verisign | Secure Token | ![]() | 0x08E6 | 0xACE0 | 0 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0 | 0 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 220 | 0xFF | shouldwork | Gemalto | Gem e-Seal Pro USB Token | ![]() | 0x08E6 | 0x2202 | 0 | 2 | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.5 | |||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 221 | 0xFF | shouldwork | OCS ID-One Cosmo Card | USB Smart Chip Device | ![]() | 0x1A74 | 0x6354 | 4 | 0 | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.8 | |
| 222 | 0xFF | shouldwork | SCM Microsystems Inc. | SDI011 Contactless Reader | ![]() | 0x04E6 | 0x512B | Vendor Interface | 3 | 1.10 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 1.4.6 | |
| 223 | 0xFF | shouldwork | SCM Microsystems Inc. | SCR331-DI USB Smart Card Reader | ![]() | 0x04E6 | 0x5120 | 4 | 3 | 1.00 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 255 | 255 | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 0.9.4 | |
| 224 | 0xFF | shouldwork | SCM Microsystems Inc. | SDI010 Smart Card Reader | ![]() | 0x04E6 | 0x5121 | 4 | 3 | 1.10 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 1.0.1 | |
| 225 | 0xFF | shouldwork | SchlumbergerSema | SchlumbergerSema Cyberflex Access | ![]() | 0x0973 | 0x0003 | 0 | 0 | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00000840 | 256 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.0 | ||
| # | bInterfaceClass | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 226 | 0xFF | disabled | OCS ID-One Cosmo Card | USB Smart Chip Device | ![]() | 0x1A74 | 0x6356 | 4 | 0 | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | The reader responds with bResponseType not defined in ICCD v1.0 specification. See http://archives.neohapsis.com/archives/dev/muscle/2009-q4/0059.html | 1.3.12 |
| 227 | 0xFF | disabled | Reiner-SCT | cyberJack pinpad(a) | ![]() | 0x0C4B | 0x0300 | 0 | 3 | 10.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10072 bps | 250000 bps | 254 | 0x00000007 | 0x00000000 | 0x00010030 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Time requests are not managed and the driver may time out without any response from the reader. This is not a problem unless you use a time-consuming APDU like RSA key generation. Reiner provides a free software driver for this reader: http://support.reiner-sct.de/ | 1.3.1 | |
| 228 | 0xFF | disabled | SCM Microsystems Inc. | SCL010 Contactless Reader | ![]() | 0x04E6 | 0x5291 | 4 | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 13.560 MHz | 13.560 MHz | 106000 bps | 848000 bps | 254 | 0x00000000 | 0x00000001 | 0x0001007E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | The contactless interface is not supported. | 1.3.11 | |
| 229 | 0xFF | disabled | SCM Microsystems Inc. | SCL01x Contactless Reader | ![]() | 0x04E6 | 0x5292 | SCL01x Contactless Reader | 3 | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 13.560 MHz | 13.560 MHz | 106000 bps | 848000 bps | 254 | 0x00000000 | 0x00000001 | 0x0001007E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | The contactless interface is not supported. | 1.3.12 |
Generated: Tue May 15 20:50:43 2012
Ludovic Rousseau