| supported | should work | unsupported | disabled |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2688 bps | shouldwork | REINER SCT | cyberJack RFID basis | ![]() | 0x0C4B | 0x9102 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 1.000 MHz | 1.000 MHz | 2688 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B0 | 266 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 2 | 4032 bps | supported | Verisign | Secure Storage Token | ![]() | 0x08E6 | 0x1359 | 0 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 3 | 4032 bps | supported | Verisign | Secure Token | ![]() | 0x08E6 | 0xACE0 | 0 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0 | 0 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 4 | 4032 bps | shouldwork | Gemalto | Gem e-Seal Pro USB Token | ![]() | 0x08E6 | 0x2202 | 0 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.5 | |||
| 5 | 4032 bps | shouldwork | Gemalto | SA .NET Dual | ![]() | 0x08E6 | 0x4042 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 1.500 MHz | 1.500 MHz | 23437 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.5 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 6 | 5376 bps | shouldwork | COVADIS | Auriga | ![]() | 0x0982 | 0x0040 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 10.01 | 0x02 | 0x07 | 0x0000 0x0003 | 2.000 MHz | 2.000 MHz | 21504 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 2 | biometric, 3 slots | No extended APDU | 1.3.12 | |
| 7 | 5376 bps | shouldwork | Gemalto | Smart Enterprise Guardian Secure USB Device | ![]() | 0x08E6 | 0x8108 | Smart Card Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 2.000 MHz | 4.000 MHz | 250000 bps | 252 | 0x00000000 | 0x00000000 | 0x0001007A | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 8 | 8065 bps | supported | OMNIKEY AG | CardMan 3121 | ![]() | 0x076B | 0x3021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.000 MHz | 12.000 MHz | 96774 bps | 254 | 0x00000007 | 0x00000000 | 0x000205B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 0.1.0 | ||
| 9 | 8065 bps | shouldwork | Winbond | CCID SmartCard Controller | ![]() | 0x0416 | 0x3815 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 3.000 MHz | 3.000 MHz | 32258 bps | 123 | 0x00000000 | 0x00000000 | 0x000004B2 | 138 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.1 | |||
| 10 | 9600 bps | supported | Feitian | ePass2003 | ![]() | 0x096E | 0x0807 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 2048 | 0x00000000 | 0x00000000 | 0x00040840 | 2100 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.4.3 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 11 | 9600 bps | supported | Gemalto | PDT | ![]() | 0x08E6 | 0x1227 | ICCD | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.9 | |
| 12 | 9600 bps | supported | SCM Microsystems Inc. | HP USB Smartcard Reader | ![]() | 0x03F0 | 0x0824 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| 13 | 9600 bps | supported | C3PO | LTC31 v2 | ![]() | 0x0783 | 0x0006 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | New model with USB product ID 0x0006 | 1.1.0 | ||
| 14 | 9600 bps | supported | TianYu CCID Key | TianYu CCID SmartKey | ![]() | 0xA625 | 0x0801 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 115200 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 512 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| 15 | 9600 bps | supported | XIRING | Leo v2 | ![]() | 0x0F14 | 0x0038 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.1 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 16 | 9600 bps | supported | XIRING | MyLeo | ![]() | 0x0F14 | 0x0037 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 522 bytes | 0xFF | 0xFF | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.2 | |
| 17 | 9600 bps | supported | XIRING | XI-SIGN USB V2 | ![]() | 0x0F14 | 0x0011 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.600 MHz | 3.600 MHz | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.9 | |
| 18 | 9600 bps | shouldwork | ATMEL | AT91SC192192CT-USB ICCD reader | ![]() | 0x03EB | 0x600B | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.11 | |
| 19 | 9600 bps | shouldwork | ATMEL | AT91SO CCID Smart Card Reader | ![]() | 0x03EB | 0x6004 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x07 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 256 | 0x00000000 | 0x00000000 | 0x0002005E | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x00 | 1 | 2 slots | No extended APDU | 1.3.9 | |
| 20 | 9600 bps | shouldwork | ATMEL | AT98SC032CT-USB | ![]() | 0x03EB | 0x6009 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 21 | 9600 bps | shouldwork | ATMEL | VaultIC420 Smart Object | ![]() | 0x03EB | 0x6012 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 22 | 9600 bps | shouldwork | ATMEL | VaultIC440 | ![]() | 0x03EB | 0x6014 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 23 | 9600 bps | shouldwork | ATMEL | VaultIC460 | ![]() | 0x03EB | 0x6016 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 24 | 9600 bps | shouldwork | Aktiv | Rutoken ECP | ![]() | 0x0A89 | 0x0030 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.11 | |
| 25 | 9600 bps | shouldwork | Aktiv | Rutoken lite | ![]() | 0x0A89 | 0x0025 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.4.2 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 26 | 9600 bps | shouldwork | Aktiv Co., ProgramPark | Rutoken Magistra | ![]() | 0x0A89 | 0x0060 | 0 | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| 27 | 9600 bps | shouldwork | ASK-RFID | CPL108 | ![]() | 0x1FD3 | 0xCC1D | Contactless | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x000400FE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 28 | 9600 bps | shouldwork | Avtor | SC Reader 371 | ![]() | 0x15CF | 0x001D | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 10.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.571 MHz | 3.571 MHz | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | |||
| 29 | 9600 bps | shouldwork | Avtor | SecureToken | ![]() | 0x15CF | 0x0019 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 10.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.571 MHz | 3.571 MHz | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| 30 | 9600 bps | shouldwork | Axalto | Reflex USB v3 | ![]() | 0x04E6 | 0x511C | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.1 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 31 | 9600 bps | shouldwork | BIFIT | iBank2Key | ![]() | 0x23A0 | 0x0002 | iBank2Key | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 64 | 0x00000000 | 0x00000000 | 0x00000840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.4.5 | ||
| 32 | 9600 bps | shouldwork | BLUTRONICS | BLUDRIVE II CCID | ![]() | 0x1B0E | 0x1078 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x00010130 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.3 | |||
| 33 | 9600 bps | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5800 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | found in Dell E6500 laptop Update the reader firmware using http://support.dell.com/support/downloads/download.aspx?c=us&cs=555&l=en&s=biz&releaseid=R254263&SystemID=LAT_E6400&servicetag=&os=WLH&osl=en&deviceid=21505&devlib=0&typecnt=0&vercnt=5&catid=-1&impid=-1&formatcnt=0&libid=60&typeid=-1&dateid=-1&formatid=-1&fileid=372654 The previous firmware generated the following errors: No communication to the device ("Resource temporarily unavailable" error) The reader reports "Hardware error" to GetSlotStatus when no card is present. | 1.3.9 | ||
| 34 | 9600 bps | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5802 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 35 | 9600 bps | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5802 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader | 1.4.2 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 36 | 9600 bps | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5802 | Contactless SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 512 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader | No extended APDU | 1.4.2 | |
| 37 | 9600 bps | shouldwork | C3PO | KBR36 | ![]() | 0x0783 | 0x0009 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.2.0 | ||
| 38 | 9600 bps | shouldwork | C3PO | LTC32 | ![]() | 0x0783 | 0x0010 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.2.0 | ||
| 39 | 9600 bps | shouldwork | C3PO | TLTC2USB | ![]() | 0x0783 | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 230400 bps | 254 | 0x00000001 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| 40 | 9600 bps | shouldwork | CCB | eSafeLD | ![]() | 0x8829 | 0xCCB2 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 1041 | 0x00000000 | 0x00000000 | 0x00040672 | 1041 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | ||||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 41 | 9600 bps | shouldwork | Free Software Initiative of Japan | Gnuk | ![]() | 0x234B | 0x0000 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 64 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 42 | 9600 bps | shouldwork | Giesecke & Devrient GmbH | Star Sign Card Token 350 (ICCD) | ![]() | 0x1059 | 0x000C | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 280 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| 43 | 9600 bps | shouldwork | Giesecke & Devrient GmbH | Star Sign Card Token 550 (ICCD) | ![]() | 0x1059 | 0x000D | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| 44 | 9600 bps | shouldwork | GoldKey Security | PIV Token | ![]() | 0x19C8 | 0x0012 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020870 | 2048 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 45 | 9600 bps | shouldwork | Inside Secure | VaultIC 460 Smart Object | ![]() | 0x2406 | 0x6302 | ICCD 1.00 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.4.6 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 46 | 9600 bps | shouldwork | Philips Semiconductors | JCOP41V221 | ![]() | 0x0471 | 0x040F | 0 | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| 47 | 9600 bps | shouldwork | KEBTechnology | KONA USB SmartCard | ![]() | 0x04CC | 0x5072 | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00000840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.6 | ||
| 48 | 9600 bps | shouldwork | C3PO | LTC36 | ![]() | 0x0783 | 0x0036 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 49 | 9600 bps | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x8033 | 5 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 50 | 9600 bps | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x0013 | 5 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 51 | 9600 bps | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x0033 | Weneo Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 52 | 9600 bps | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x1023 | Weneo SIM Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x0001023A | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.3 | |||
| 53 | 9600 bps | shouldwork | OCS ID-One Cosmo Card | USB Smart Chip Device | ![]() | 0x1A74 | 0x6354 | 4 | 0 | 0xFF | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.8 | |
| 54 | 9600 bps | shouldwork | Philips Semiconductors | SmartMX Sample | ![]() | 0x04B9 | 0x1400 | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | used in some SafeNet iKey 4000 | 1.3.10 |
| 55 | 9600 bps | shouldwork | Teridian Semiconductors | TSC12xxFV.09 | ![]() | 0x1862 | 0x0000 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x04 | 0x03 | 0x0000 0x0003 | 3.600 MHz | 8.000 MHz | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000405F2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 5 | 5 slots | 1.4.6 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 56 | 9600 bps | shouldwork | ubisys | 13.56MHz RFID (CCID) | ![]() | 0x19A6 | 0x0009 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020042 | 288 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.4.5 | |
| 57 | 9600 bps | shouldwork | VMware | Virtual USB CCID | ![]() | 0x0E0F | 0x0004 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x0002004E | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.9 | |
| 58 | 9600 bps | shouldwork | Validy | TokenA sl vt | ![]() | 0x1CF0 | 0x0001 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 1024 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.6 | |||
| 59 | 9600 bps | shouldwork | XIRING | XI-SIGN USB V2 | ![]() | 0x0F14 | 0x0011 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.600 MHz | 3.600 MHz | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x020C | 0x00 | 1 | No extended APDU | 1.3.9 | ||
| 60 | 9600 bps | shouldwork | SchlumbergerSema | SchlumbergerSema Cyberflex Access | ![]() | 0x0973 | 0x0003 | 0 | 0 | 0xFF | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00000840 | 256 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.0 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 61 | 9600 bps | unsupported | ActivCard | ActivCard USB Reader V2 | ![]() | 0x09C3 | 0x0008 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | The reader do timeout when a special USB frame is sent from the reader. If the frame size if a multiple of wMaxPacketSize the communication is stopped. Some users report that this reader is in fact a SCR-331 with a different firmware and that you can upgrade its firmware to transform it into a (supported) SCR-331 reader. | 1.0.0 | ||
| 62 | 9600 bps | unsupported | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5801 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Found in Dell E6400 laptop The reader reports "Hardware error" to GetSlotStatus when no card is present. | 1.3.12 | ||
| 63 | 9600 bps | unsupported | O2 | Micro Oz776 | ![]() | 0x0B97 | 0x7762 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops like the Dell D420 or D820. The ATR may be corrupted by a 90 00 at the end The reader is bogus and does not accept PPS | 0.9.3 | ||
| 64 | 9600 bps | unsupported | O2 | Micro Oz776 | ![]() | 0x0B97 | 0x7772 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops. The reader is bogus and does not accept PPS | 1.3.1 | ||
| 65 | 9600 bps | disabled | OCS ID-One Cosmo Card | USB Smart Chip Device | ![]() | 0x1A74 | 0x6356 | 4 | 0 | 0xFF | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | The reader responds with bResponseType not defined in ICCD v1.0 specification. See http://archives.neohapsis.com/archives/dev/muscle/2009-q4/0059.html | 1.3.12 |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 66 | 9600 bps | disabled | SMART | SBV280 | ![]() | 0x0B8C | 0x000E | CCID 1.1 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | Removed on manufacturer request. They use libusb directly in their own driver. | 1.3.12 |
| 67 | 9600 bps | disabled | jNet Technology inc. | jToken s1 | ![]() | 0x0483 | 0x2010 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00010840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.9 | ||
| 68 | 9677 bps | shouldwork | German Privacy Foundation | Crypto Stick v1.2 | ![]() | 0x20A0 | 0x4107 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0002 | 3.600 MHz | 3.600 MHz | 116129 bps | 254 | 0x00000000 | 0x00000000 | 0x000104BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 69 | 9909 bps | shouldwork | NXP | PR533 | ![]() | 0x1FC9 | 0x010B | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.685 MHz | 13.560 MHz | 216960000 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 273 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | SVN | |||
| 70 | 9909 bps | shouldwork | SpringCard | CSB6 Basic | ![]() | 0x1C34 | 0x7121 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.3.9 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 71 | 9909 bps | shouldwork | SpringCard | CSB6 Secure | ![]() | 0x1C34 | 0x7123 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x02 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 3 slots | No extended APDU | 1.3.9 | |
| 72 | 9909 bps | shouldwork | SpringCard | CSB6 Ultimate | ![]() | 0x1C34 | 0x7124 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x04 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 5 slots | No extended APDU | 1.3.9 | |
| 73 | 9909 bps | shouldwork | SpringCard | CrazyWriter | ![]() | 0x1C34 | 0x7113 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x02 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 3 slots | No extended APDU | 1.3.9 | |
| 74 | 9909 bps | shouldwork | SpringCard | EasyFinger Standard | ![]() | 0x1C34 | 0x7136 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | No extended APDU | 1.3.9 | |
| 75 | 9909 bps | shouldwork | SpringCard | EasyFinger Ultimate | ![]() | 0x1C34 | 0x7138 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x03 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 4 slots | No extended APDU | 1.3.9 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 76 | 9909 bps | shouldwork | SpringCard | Prox'N'Roll | ![]() | 0x1C34 | 0x7141 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.3.9 | |
| 77 | 9910 bps | shouldwork | Gemalto | Hybrid Smartcard Reader | ![]() | 0x08E6 | 0x5743 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x02 | 0x0000 0x0001 | 3.686 MHz | 3.686 MHz | 9910 bps | 0 | 0x00000000 | 0x00000000 | 0x00010070 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 2 slots | 1.3.12 | ||
| 78 | 9924 bps | shouldwork | OMNIKEY | CardMan 1021 | ![]() | 0x076B | 0x1021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.692 MHz | 3.692 MHz | 317591 bps | 254 | 0x00000007 | 0x00000000 | 0x000103B1 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| 79 | 9924 bps | shouldwork | OMNIKEY AG | Smart Card Reader | ![]() | 0x076B | 0xA021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.692 MHz | 3.692 MHz | 119096 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.10 | ||
| 80 | 9946 bps | supported | Alcor Micro | AU9520 | ![]() | 0x058F | 0x9520 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | Firmware 1.01 is bogus. The time request sent by the card is not forwarded by the reader to the host. | 1.1.0 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 81 | 9946 bps | supported | Alcor Micro | AU9540 | ![]() | 0x058F | 0x9540 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.5 | |||
| 82 | 9946 bps | supported | Giesecke & Devrient GmbH | StarSign Crypto USB Token | ![]() | 0x1059 | 0x0017 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 83 | 9946 bps | shouldwork | Akasa | AK-CR-03 | ![]() | 0x058F | 0x9520 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.1 | ||
| 84 | 9946 bps | shouldwork | Alcor Micro | AU9522 | ![]() | 0x058F | 0x9522 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x01 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 2 slots | No extended APDU | Built in reader for the "Friio USB2.0 DTV Receiver" | SVN | |
| 85 | 9946 bps | shouldwork | Alcor Micro | SCR001 | ![]() | 0x058F | 0x9520 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.11 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 86 | 9946 bps | shouldwork | Sitecom | Sitecom USB simcard reader MD-010 | ![]() | 0x0DF6 | 0x800A | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.0 | ||
| 87 | 9946 bps | shouldwork | VASCO | DP905 | ![]() | 0x1A44 | 0x0001 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.6 | ||
| 88 | 9946 bps | shouldwork | VASCO | DIGIPASS KEY 101 | ![]() | 0x1A44 | 0x0101 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 89 | 10072 bps | disabled | Reiner-SCT | cyberJack pinpad(a) | ![]() | 0x0C4B | 0x0300 | 0 | 3 | 0xFF | 10.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 250000 bps | 254 | 0x00000007 | 0x00000000 | 0x00010030 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Time requests are not managed and the driver may time out without any response from the reader. This is not a problem unless you use a time-consuming APDU like RSA key generation. Reiner provides a free software driver for this reader: http://support.reiner-sct.de/ | 1.3.1 | |
| 90 | 10080 bps | shouldwork | Dectel | CI692 | ![]() | 0x0BDA | 0x0165 | Smart Card Reader Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 91 | 10080 bps | shouldwork | MSI | StarReader SMART | ![]() | 0x0BDA | 0x0161 | Smart Card Reader Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | You may need to unload/blacklist the mceusb Linux kernel driver to use the device. | 1.3.10 | ||
| 92 | 10080 bps | shouldwork | Generic | USB2.0-CRW | ![]() | 0x0BDA | 0x0169 | 6 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 93 | 10573 bps | supported | KOBIL | EMV CAP - SecOVID Reader III | ![]() | 0x0D46 | 0x3010 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 2.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 536 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.1 | ||
| 94 | 10752 bps | supported | ACS | ACR 38U-CCID | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Old versions of this reader are bogus: the reader do timeout when a special USB frame is sent from the reader. If the frame size is a multiple of wMaxPacketSize the communication is stopped. | 1.0.0 | ||
| 95 | 10752 bps | supported | Athena | ASEDrive IIIe KB | ![]() | 0x0DC3 | 0x1102 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Firmware older than 6.07 is bogus | 1.0.1 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 96 | 10752 bps | supported | Athena | ASE IIIe | ![]() | 0x0DC3 | 0x1004 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 97 | 10752 bps | supported | COVADIS | ALYA | ![]() | 0x0982 | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | 1.3.6 | ||
| 98 | 10752 bps | supported | Cherry GmbH | SmartTerminal XX44 | ![]() | 0x046A | 0x002D | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 0.9.4 | ||
| 99 | 10752 bps | supported | Cherry GmbH | SmartBoard XX33 | ![]() | 0x046A | 0x0005 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0 | 0 | 0x0000 | 0x01 | 1 | PIN Verification | No extended APDU | 0.9.0 | |
| 100 | 10752 bps | supported | Cherry GmbH | SmartBoard XX44 | ![]() | 0x046A | 0x0010 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 0.9.3 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 101 | 10752 bps | supported | Eutron | CryptoIdentity CCID | ![]() | 0x073D | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 102 | 10752 bps | supported | Dell | Dell Smart Card Reader Keyboard | ![]() | 0x413C | 0x2101 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | PIN Verification | Seems to support SPE only if the VERIFY command has a fixed length. See http://www.opensc-project.org/pipermail/opensc-devel/2011-May/016726.html | 0.9.0 | |
| 103 | 10752 bps | supported | Dell | keyboard SK-3106 | ![]() | 0x413C | 0x2100 | ????? | 3 | 0xFF | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | PIN Verification | 0.9.0 | ||
| 104 | 10752 bps | supported | Eutron | CryptoIdentity CCID | ![]() | 0x073D | 0x0008 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 105 | 10752 bps | supported | Eutron | Digipass 860 | ![]() | 0x073D | 0x0B00 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 106 | 10752 bps | supported | Eutron | Card Reader | ![]() | 0x073D | 0x0C00 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The device contains a hub with 3 devices: 2 CCID card readers and a USB Mass storage | 1.4.2 | ||
| 107 | 10752 bps | supported | Eutron | SIM Reader | ![]() | 0x073D | 0x0C00 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The device contains a hub with 3 devices: 2 CCID card readers and a USB Mass storage | 1.4.2 | ||
| 108 | 10752 bps | supported | Eutron | Smart Pocket | ![]() | 0x073D | 0x0C01 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 109 | 10752 bps | supported | Gemalto | GemCore SIM Pro Smart Card Reader | ![]() | 0x08E6 | 0x3480 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x01 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 2 slots | 1.0.0 | ||
| 110 | 10752 bps | supported | Gemalto | Gemplus USB SmartCard Reader 433-Swap | ![]() | 0x08E6 | 0x4433 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0 | 0 | 0x0000 | 0x00 | 1 | No extended APDU | 0.1.0 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 111 | 10752 bps | supported | Gemalto | USB Shell Token V2 | ![]() | 0x08E6 | 0x3438 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.1.0 | |||
| 112 | 10752 bps | supported | Gemalto | USB GemPCPinpad SmartCard Reader | ![]() | 0x08E6 | 0x3478 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Known problems/limitations: Does not support minimum PIN length (wPINMaxExtraDigit) lower than 4 Does not support maximum PIN length (wPINMaxExtraDigit) greater than 8 Does send a VERIFY PIN command with an empty PIN to get the number of remaining trials. This may be problematic with some smart cards like the Belgian eID card that does not support this and will decrement the counter | 1.0.0 | |
| 113 | 10752 bps | supported | Gemalto | PC Twin Reader | ![]() | 0x08E6 | 0x3437 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | serial | 0.1.0 | ||
| 114 | 10752 bps | supported | Gemalto | Prox Dual USB PC LinkReader | ![]() | 0x08E6 | 0x5503 | Prox-DU Contact interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader, contactless | 1.4.2 | ||
| 115 | 10752 bps | supported | Gemalto | Prox Dual USB PC LinkReader | ![]() | 0x08E6 | 0x5503 | Prox-DU Contactless interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 278 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader, contactless | No extended APDU | 1.4.2 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 116 | 10752 bps | supported | Gemalto | Prox SU USB PC LinkReader | ![]() | 0x08E6 | 0x5504 | Prox-SU Contact interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader, contactless | 1.4.2 | ||
| 117 | 10752 bps | supported | Gemalto | Prox SU USB PC LinkReader | ![]() | 0x08E6 | 0x5504 | Prox-SU Contactless interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 278 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader, contactless | No extended APDU | 1.4.2 | |
| 118 | 10752 bps | supported | Gemalto | EZIO CB+ | ![]() | 0x08E6 | 0x34C3 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.4 | ||
| 119 | 10752 bps | supported | Gemalto | Ezio Shield | ![]() | 0x08E6 | 0x34C0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.4 | ||
| 120 | 10752 bps | supported | Lenovo | Integrated Smart Card Reader | ![]() | 0x17EF | 0x1003 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 121 | 10752 bps | supported | MYSMART | MySMART PAD V2.0 | ![]() | 0x09BE | 0x0002 | 0 | 3 | 0xFF | 1.00 | 0x00 | 0x00 | 0x0000 0x0300 | 1024.000 MHz | 1024.000 MHz | 129032 bps | 0 | 0x00000000 | 0x03000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 122 | 10752 bps | supported | Precise Biometrics | Sense MC | ![]() | 0x076B | 0xA022 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | biometric | No extended APDU | 1.4.5 | |
| 123 | 10752 bps | supported | XIRING | Teo | ![]() | 0x076B | 0xA022 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.2.0 | ||
| 124 | 10752 bps | shouldwork | ACS | ACR122U | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.5 | |||
| 125 | 10752 bps | shouldwork | ACS | ACR100 | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 126 | 10752 bps | shouldwork | ACS | ACR101 ICC Reader | ![]() | 0x072F | 0x1204 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | SVN | ||||
| 127 | 10752 bps | shouldwork | ACS | ACR38 plugin | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 128 | 10752 bps | shouldwork | ACS | AET65 | ![]() | 0x072F | 0x90CC | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 129 | 10752 bps | shouldwork | ACS | APG8201 PINhandy 1 | ![]() | 0x072F | 0x8201 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344100 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.2 | ||
| 130 | 10752 bps | shouldwork | ATMEL | AT90SCR050 | ![]() | 0x03EB | 0x6011 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344064 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 131 | 10752 bps | shouldwork | ATMEL | AT90SCR100 | ![]() | 0x03EB | 0x6010 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344064 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 132 | 10752 bps | shouldwork | Athena | IDProtect Key v2 | ![]() | 0x0DC3 | 0x0900 | Main Interface | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 252 | 0x00000000 | 0x00000000 | 0x0001023C | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Be to have a v2 token (bcdDevice: 2.00). The V1 token is bogus: PPS to set the card in T=1 fails. See http://www.opensc-project.org/pipermail/opensc-user/2010-May/004023.html | 1.3.12 | ||
| 133 | 10752 bps | shouldwork | HDZB | uKeyCI800-K18 | ![]() | 0x1677 | 0x0025 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 134 | 10752 bps | shouldwork | OMNIKEY AG | CardMan 3021 | ![]() | 0x076B | 0x3021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.1.0 | ||
| 135 | 10752 bps | shouldwork | OMNIKEY AG | CardMan 3621 | ![]() | 0x076B | 0x3621 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | Does not support minimum PIN length (wPINMaxExtraDigit) lower than 5 | 1.0.1 |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 136 | 10752 bps | shouldwork | OMNIKEY AG | CardMan 3821 | ![]() | 0x076B | 0x3821 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | Does not support minimum PIN length (wPINMaxExtraDigit) lower than 5 | 1.0.0 |
| 137 | 10752 bps | shouldwork | OMNIKEY | CardMan 4321 | ![]() | 0x076B | 0x4321 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ExpressCard | No extended APDU | The reader may report a card present if no card is inserted. See https://bugzilla.redhat.com/show_bug.cgi?id=531998 | 1.3.0 |
| 138 | 10752 bps | shouldwork | OMNIKEY AG | CardMan 5121 | ![]() | 0x076B | 0x5121 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The RFID interface is not supported. | 1.2.0 |
| 139 | 10752 bps | shouldwork | OMNIKEY AG | CardMan 5125 | ![]() | 0x076B | 0x5125 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The HID PROX interface is not supported. | 1.0.0 |
| 140 | 10752 bps | shouldwork | OMNIKEY | CardMan 5321 | ![]() | 0x076B | 0x5321 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The RFID interface is not supported. | 1.3.1 |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 141 | 10752 bps | shouldwork | OMNIKEY AG | CardMan 6121 | ![]() | 0x076B | 0x6622 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.0.0 | ||
| 142 | 10752 bps | shouldwork | charismathics | plug'n'crypt CCID token | ![]() | 0x19E7 | 0x0002 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 143 | 10752 bps | shouldwork | Cherry GmbH | SmartBoard XX1X | ![]() | 0x046A | 0x005B | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.5 | |
| 144 | 10752 bps | shouldwork | Cherry GmbH | SmartTerminal XX1X | ![]() | 0x046A | 0x0070 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.9 | ||
| 145 | 10752 bps | shouldwork | Cherry GmbH | SmartTerminal ST-1275 | ![]() | 0x046A | 0x0072 | Smart Card Reader CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The contactless interface is not supported. | 1.3.12 |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 146 | 10752 bps | shouldwork | Feitian Technologies | FT SCR310 | ![]() | 0x096E | 0x0505 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 600000 bps | 248 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 0 | 1.4.2 | |||
| 147 | 10752 bps | shouldwork | Fujitsu Siemens Computers | SmartCard Keyboard USB 2A | ![]() | 0x0BF8 | 0x1005 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.0 | |
| 148 | 10752 bps | shouldwork | Fujitsu Siemens Computers | SmartCard USB 2A | ![]() | 0x0BF8 | 0x1006 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.0 | |
| 149 | 10752 bps | shouldwork | Gemplus | GemCore POS Pro Smart Card Reader | ![]() | 0x08E6 | 0x3479 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x04 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 5 slots | 1.4.4 | |||
| 150 | 10752 bps | shouldwork | Gemalto | USB GemPCPinpad SmartCard Reader | ![]() | 0x08E6 | 0x3478 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.13 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 151 | 10752 bps | shouldwork | Gemalto | GemPC Express | ![]() | 0x08E6 | 0x34EC | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ExpressCard | 1.0.0 | ||
| 152 | 10752 bps | shouldwork | Gemalto | Ezio Shield Branch Reader | ![]() | 0x08E6 | 0x34C5 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x000204B2 | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | SVN | |
| 153 | 10752 bps | shouldwork | Gemalto | Ezio Shield | ![]() | 0x08E6 | 0x34C2 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.5 | |||
| 154 | 10752 bps | shouldwork | Kingtrust | Multi-Reader | ![]() | 0x0483 | 0x0007 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 155 | 10752 bps | shouldwork | Macally | NFC CCID eNetPad | ![]() | 0x08AE | 0x0BDF | Macally CCID READER | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 344100 bps | 256 | 0x00000000 | 0x00000000 | 0x00020040 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 156 | 10752 bps | shouldwork | OMNIKEY | 6321 CLi USB | ![]() | 0x076B | 0x6321 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| 157 | 10752 bps | shouldwork | Panasonic | Panasonic USB Smart Card Reader 7A-Smart | ![]() | 0x04DA | 0x117A | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 158 | 10752 bps | shouldwork | Raritan | D2CIM-DVUSB VM/CCID | ![]() | 0x14DD | 0x1006 | 18 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010238 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 159 | 10752 bps | shouldwork | Softforum Co., Ltd | XecureHSM | ![]() | 0x04E8 | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 160 | 10752 bps | shouldwork | SYNNIX | STD200 | ![]() | 0x1206 | 0x2105 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 161 | 10752 bps | shouldwork | Tianyu | Smart Card Reader | ![]() | 0xA625 | 0x0810 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 162 | 10752 bps | shouldwork | Todos | Argos Mini II | ![]() | 0x0B0C | 0x0050 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | Use at least firmware 1.01. The previous one is bogus. | 1.3.12 | |
| 163 | 10752 bps | shouldwork | Todos | CX00 | ![]() | 0x0B0C | 0x0052 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x00 | 1 | No extended APDU | 1.4.0 | ||
| 164 | 10752 bps | shouldwork | VASCO | DIGIPASS KEY 202 | ![]() | 0x1A44 | 0x0120 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 165 | 10752 bps | shouldwork | VASCO | DIGIPASS KEY 202 | ![]() | 0x1A44 | 0x0122 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 166 | 10752 bps | shouldwork | VASCO | DIGIPASS KEY 200 | ![]() | 0x1A44 | 0x0119 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 167 | 10752 bps | shouldwork | VASCO | DP855 | ![]() | 0x1A44 | 0x0855 | 3 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 168 | 10752 bps | shouldwork | VASCO | DIGIPASS KEY 860 | ![]() | 0x1A44 | 0x0117 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 169 | 10752 bps | shouldwork | VASCO | DP865 | ![]() | 0x1A44 | 0x0865 | 3 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0818 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 170 | 10752 bps | shouldwork | VASCO | DIGIPASS KEY 200 | ![]() | 0x1A44 | 0x0115 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 171 | 10752 bps | shouldwork | VASCO | DIGIPASS KEY 860 | ![]() | 0x1A44 | 0x0112 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 172 | 10752 bps | shouldwork | VASCO | DIGIPASS 920 | ![]() | 0x1A44 | 0x0920 | CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.3 | ||
| 173 | 10752 bps | shouldwork | COVADIS | VEGA-ALPHA | ![]() | 0x0982 | 0x0008 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.6 | ||
| 174 | 10752 bps | shouldwork | Bit4id | cryptokey | ![]() | 0x25DD | 0x1201 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 175 | 10752 bps | shouldwork | Bit4id | iAM | ![]() | 0x25DD | 0x2221 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 176 | 10752 bps | shouldwork | Bit4id | CKey4 | ![]() | 0x25DD | 0x2321 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 177 | 10752 bps | shouldwork | Bit4id | miniLector-s | ![]() | 0x25DD | 0x1101 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 129032 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 178 | 10752 bps | shouldwork | Bit4id | miniLector | ![]() | 0x25DD | 0x3111 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 129032 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 179 | 10752 bps | unsupported | ACS | ACR122U PICC Interface | ![]() | 0x072F | 0x2200 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 250000 bps | 256 | 0x00000000 | 0x00000000 | 0x00020040 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | contactless | No extended APDU | Time extension requests are not supported. Firmwares version < 2.06 are bogus: APDU with 0x7B (123) bytes expected do not work with a 14443 card. The reader returns SW=63 00 instead. | 1.3.9 |
| 180 | 10752 bps | unsupported | Aladdin | eToken PRO USB 72K Java | ![]() | 0x0529 | 0x0620 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 49 | 0x00000000 | 0x00000000 | 0x0001023C | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The token does not work after a warm reset. See http://www.opensc-project.org/pipermail/opensc-devel/2009-April/012128.html | 1.3.9 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 181 | 10752 bps | unsupported | Feitian | SCR301 | ![]() | 0x096E | 0x0503 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 344086 bps | 240 | 0x00000000 | 0x00000000 | 0x000102B8 | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | The reader fails with a CASE 2 APDU with Le=0 (256 bytes) Sent: 80 34 01 00 00 ifdhandler.c:1219:IFDHTransmitToICC() no name (lun: 0) commands.c:1542:CmdXfrBlockTPDU_T0() T=0: 5 bytes -> 000000 6F 05 00 00 00 00 07 00 00 00 80 34 01 00 00 <- 000000 80 00 00 00 00 00 07 40 FE 00 commands.c:1316:CCID_Receive Card absent or mute And time extension requests are not forwarded back to the host. A new version of the reader is available and may fix this issue. | 1.3.11 | ||
| 182 | 10752 bps | unsupported | C3PO | LTC3x USB | ![]() | 0x0783 | 0x0003 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00010002 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The reader works fine with Linux kernel 2.4 but does not with Linux kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument). This reader is not more sold and replaced by the LTC31v2 model. | 0.1.0 | ||
| 183 | 10752 bps | unsupported | KOBIL Systems | mIDentity M | ![]() | 0x0D46 | 0x4000 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | Time requests are not managed correctly and make the firmware fail. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | 0.9.3 | |
| 184 | 10752 bps | unsupported | KOBIL Systems | mIDentity XL | ![]() | 0x0D46 | 0x4001 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Time requests are not managed correctly and make the firmware fail. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | 1.3.9 | ||
| 185 | 10752 bps | unsupported | RSA | RSA SecurID (R) Authenticator | ![]() | 0x15E1 | 0x2007 | MSD | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x02 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 125000 bps | 254 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | the new firmware (revision 6284) fails to respond to initial CmdGetSlotStatus() with "ccid_usb.c:687:ReadUSB() read failed (5/2): -8 Success" or with "<- 000000 81 FB FF FF FF" "commands.c:1046:CmdGetSlotStatus() Not enough data received: 5 bytes" | 0.9.4 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 186 | 10752 bps | disabled | THRC | USB Smart Card Reader | ![]() | 0x062D | 0x0001 | SCR Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | also known as ID-SMID01, SCT018 and maybe other commercial names PPS fails with a Cryptoflex card Powerup fails with a Setcos card | 1.1.0 | ||
| 187 | 10753 bps | supported | Cherry GmbH | SmartTerminal ST-2xxx | ![]() | 0x046A | 0x003E | 4 | 3 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 0.9.4 | ||
| 188 | 10753 bps | supported | SCM Microsystems Inc. | SCR 331-DI | ![]() | 0x04E6 | 0x5111 | 4 | 3 | 0xFF | 1.00 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | You have to upgrade the firmware using version 5.18 or later. The contactless interface is not supported. | 0.4.0 | |
| 189 | 10753 bps | supported | SCM Microsystems Inc. | SCR 331 | ![]() | 0x04E6 | 0xE001 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. | 0.1.0 | ||
| 190 | 10753 bps | supported | SCM Microsystems Inc. | SCR 3310 | ![]() | 0x04E6 | 0x5116 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 0.9.3 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 191 | 10753 bps | supported | SCM Microsystems Inc. | SCR 3311 | ![]() | 0x04E6 | 0x511D | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 192 | 10753 bps | supported | SCM Microsystems Inc. | SCR 355 | ![]() | 0x04E6 | 0x5410 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 193 | 10753 bps | supported | SCM Microsystems Inc. | SPR 532 | ![]() | 0x04E6 | 0xE003 | 4 | 3 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 254 | 0x00000000 | 0x00000000 | 0x000100BA | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | You have to upgrade the firmware using version 5.10 or later. | 0.3.2 | |
| 194 | 10753 bps | shouldwork | Hewlett Packard | MFP Smart Card Reader | ![]() | 0x03F0 | 0x2924 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.9 | |||
| 195 | 10753 bps | shouldwork | SCM Microsystems Inc. | SCL01x Contactless Reader | ![]() | 0x04E6 | 0x5293 | SCL01x Contactless Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000001 | 0x000404BE | 262 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | You have to upgrade the firmware using version 1.12 or later | 1.4.3 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 196 | 10753 bps | shouldwork | SCM Microsystems Inc. | SDI011 Contactless Reader | ![]() | 0x04E6 | 0x512B | Vendor Interface | 3 | 0xFF | 1.10 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 1.4.6 | |
| 197 | 10753 bps | shouldwork | SCM Microsystems Inc. | SCR331-DI USB Smart Card Reader | ![]() | 0x04E6 | 0x5120 | 4 | 3 | 0xFF | 1.00 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 255 | 255 | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 0.9.4 | |
| 198 | 10753 bps | shouldwork | SCM Microsystems Inc. | SCR3310 USB Smart Card Reader | ![]() | 0x04E6 | 0x511F | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 199 | 10753 bps | shouldwork | SCM Microsystems Inc. | SCR3320 - Smart Card Reader | ![]() | 0x04E6 | 0x5117 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 200 | 10753 bps | shouldwork | SCM Microsystems Inc. | SCR33x USB Smart Card Reader | ![]() | 0x04E6 | 0x5113 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 201 | 10753 bps | shouldwork | SCM Microsystems Inc. | SCR3340 - ExpressCard54 Smart Card Reader | ![]() | 0x04E6 | 0x5119 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ExpressCard | 1.0.0 | ||
| 202 | 10753 bps | shouldwork | SCM Microsystems Inc. | SDI010 Smart Card Reader | ![]() | 0x04E6 | 0x5121 | 4 | 3 | 0xFF | 1.10 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 1.0.1 | |
| 203 | 10753 bps | unsupported | Hewlett-Packard Company | HP USB Smart Card Keyboard | ![]() | 0x03F0 | 0x1024 | 4 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | SECURITY ALERT: Martin P. reported that on Mac OS X the pinpad feature does not work correctly and the PIN code is sent to the host (instead of being kept secret by the pinpad) | 1.1.0 | |
| 204 | 10753 bps | unsupported | Precise Biometrics | Precise 200 MC | ![]() | 0x08C3 | 0x0402 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 7.500 MHz | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 65550 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html | 1.3.10 | |
| 205 | 10753 bps | unsupported | Precise Biometrics | Precise 250 MC | ![]() | 0x08C3 | 0x0401 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 7.500 MHz | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 65550 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html | 1.3.6 | |
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 206 | 12407 bps | shouldwork | KOBIL Systems | mIDentity 4smart | ![]() | 0x0D46 | 0x4189 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 207 | 12407 bps | shouldwork | KOBIL Systems | mIDentity 4smart AES | ![]() | 0x0D46 | 0x41A9 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 208 | 12407 bps | shouldwork | KOBIL Systems | mIDentity fullsize | ![]() | 0x0D46 | 0x4389 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 209 | 12407 bps | shouldwork | KOBIL Systems | mIDentity fullsize AES | ![]() | 0x0D46 | 0x43A9 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 210 | 12407 bps | shouldwork | KOBIL Systems | mIDentity visual | ![]() | 0x0D46 | 0x4289 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 211 | 12903 bps | supported | ActivIdentity | USB Reader V3 | ![]() | 0x09C3 | 0x0013 | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 212 | 12903 bps | supported | ActivIdentity | Activkey Sim | ![]() | 0x09C3 | 0x0014 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.1.0 | |||
| 213 | 12903 bps | supported | KOBIL | KAAN Advanced | ![]() | 0x0D46 | 0x3002 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 432 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Firmware older than 0.37 is bogus | 0.9.3 | |
| 214 | 12903 bps | supported | KOBIL | KAAN Base | ![]() | 0x0D46 | 0x3001 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 432 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Firwmare older than 0.37 is bogus | 0.9.3 | ||
| 215 | 12903 bps | supported | KOBIL | KAAN SIM III | ![]() | 0x0D46 | 0x3003 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 0.9.3 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 216 | 12903 bps | shouldwork | FujitsuTechnologySolutions GmbH | SmartCase KB SCR eSIG | ![]() | 0x0BF8 | 0x1017 | SmartCase Smartcard Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 307200 bps | 252 | 0x00000000 | 0x00000001 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.6 | ||
| 217 | 12903 bps | shouldwork | KOBIL Systems | Smart Token | ![]() | 0x0D46 | 0x3014 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 412896 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 586 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 218 | 12903 bps | shouldwork | OBERTHUR TECHNOLOGIES | ID-ONE TOKEN SLIM v2 | ![]() | 0x1A74 | 0xB111 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 12.000 MHz | 825807 bps | 252 | 0x00000000 | 0x00000000 | 0x00010200 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 219 | 12903 bps | shouldwork | SCM Microsystems Inc. | SCR 335 | ![]() | 0x04E6 | 0x5115 | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. Or use a v2.0 model. | 0.1.0 | ||
| 220 | 12903 bps | shouldwork | SCM Microsystems Inc. | SCR35xx v2.0 USB SC Reader | ![]() | 0x04E6 | 0x5410 | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 221 | 12903 bps | shouldwork | Secure Device Solutions | DOMINO-Key TWIN | ![]() | 0x0B81 | 0x8007 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 12.000 MHz | 825807 bps | 252 | 0x00000000 | 0x00000000 | 0x00010200 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.5 | ||||
| 222 | 12903 bps | unsupported | Hewlett-Packard Company | HP USB CCID Smartcard Keyboard | ![]() | 0x03F0 | 0x0036 | HP USB CCID Keyboard Smartcard Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 307200 bps | 252 | 0x00000000 | 0x00000001 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | WARNING: Secure Pin Entry feature is bogus and has been disabled. firmware < 1.24 is bogus. SetParameters fails with a card of ATR 3B 16 96 41 73 74 72 69 64. The smart card reader part is from SCM. | 1.4.1 | |
| 223 | 13440 bps | shouldwork | BIFIT | USB-Token iBank2key | ![]() | 0x23A0 | 0x0001 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0002 | 5.000 MHz | 5.000 MHz | 430107 bps | 254 | 0x00000000 | 0x00000000 | 0x000205B8 | 272 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.5 | ||
| 224 | 20112 bps | supported | Gemalto | Smart Enterprise Guardian Secure USB Device | ![]() | 0x08E6 | 0x8000 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 7.500 MHz | 223200 bps | 252 | 0x00000000 | 0x00000000 | 0x0001007A | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.2 | |||
| 225 | 106000 bps | supported | id3 Semiconductors | CL1356T | ![]() | 0x0B81 | 0x0200 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| # | dwDataRate | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 226 | 106000 bps | shouldwork | id3 Semiconductors | CL1356A_HID | ![]() | 0x0B81 | 0x0220 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.7 | ||
| 227 | 106000 bps | shouldwork | id3 Semiconductors | CL1356T5 | ![]() | 0x0B81 | 0x0200 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 228 | 106000 bps | disabled | SCM Microsystems Inc. | SCL010 Contactless Reader | ![]() | 0x04E6 | 0x5291 | 4 | 3 | 0xFF | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 13.560 MHz | 13.560 MHz | 848000 bps | 254 | 0x00000000 | 0x00000001 | 0x0001007E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | The contactless interface is not supported. | 1.3.11 | |
| 229 | 106000 bps | disabled | SCM Microsystems Inc. | SCL01x Contactless Reader | ![]() | 0x04E6 | 0x5292 | SCL01x Contactless Reader | 3 | 0xFF | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 13.560 MHz | 13.560 MHz | 848000 bps | 254 | 0x00000000 | 0x00000001 | 0x0001007E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | The contactless interface is not supported. | 1.3.12 |
Generated: Tue May 15 20:50:44 2012
Ludovic Rousseau