| supported | should work | unsupported | disabled |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 64 bytes | shouldwork | Free Software Initiative of Japan | Gnuk | ![]() | 0x234B | 0x0000 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 2 | 138 bytes | shouldwork | Winbond | CCID SmartCard Controller | ![]() | 0x0416 | 0x3815 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 3.000 MHz | 3.000 MHz | 8065 bps | 32258 bps | 123 | 0x00000000 | 0x00000000 | 0x000004B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.1 | |||
| 3 | 256 bytes | shouldwork | SchlumbergerSema | SchlumbergerSema Cyberflex Access | ![]() | 0x0973 | 0x0003 | 0 | 0 | 0xFF | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00000840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.0 | ||
| 4 | 261 bytes | supported | Gemalto | PDT | ![]() | 0x08E6 | 0x1227 | ICCD | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.9 | |
| 5 | 261 bytes | shouldwork | Aktiv Co., ProgramPark | Rutoken Magistra | ![]() | 0x0A89 | 0x0060 | 0 | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 6 | 261 bytes | shouldwork | Giesecke & Devrient GmbH | Star Sign Card Token 550 (ICCD) | ![]() | 0x1059 | 0x000D | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| 7 | 261 bytes | shouldwork | Philips Semiconductors | JCOP41V221 | ![]() | 0x0471 | 0x040F | 0 | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| 8 | 261 bytes | shouldwork | KEBTechnology | KONA USB SmartCard | ![]() | 0x04CC | 0x5072 | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00000840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.6 | ||
| 9 | 261 bytes | shouldwork | OCS ID-One Cosmo Card | USB Smart Chip Device | ![]() | 0x1A74 | 0x6354 | 4 | 0 | 0xFF | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.8 | |
| 10 | 261 bytes | shouldwork | Philips Semiconductors | SmartMX Sample | ![]() | 0x04B9 | 0x1400 | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | used in some SafeNet iKey 4000 | 1.3.10 |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 11 | 261 bytes | disabled | OCS ID-One Cosmo Card | USB Smart Chip Device | ![]() | 0x1A74 | 0x6356 | 4 | 0 | 0xFF | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | The reader responds with bResponseType not defined in ICCD v1.0 specification. See http://archives.neohapsis.com/archives/dev/muscle/2009-q4/0059.html | 1.3.12 |
| 12 | 262 bytes | shouldwork | SCM Microsystems Inc. | SCL01x Contactless Reader | ![]() | 0x04E6 | 0x5293 | SCL01x Contactless Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000001 | 0x000404BE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | You have to upgrade the firmware using version 1.12 or later | 1.4.3 | |
| 13 | 263 bytes | supported | Cherry GmbH | SmartTerminal ST-2xxx | ![]() | 0x046A | 0x003E | 4 | 3 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 0.9.4 | ||
| 14 | 263 bytes | supported | SCM Microsystems Inc. | HP USB Smartcard Reader | ![]() | 0x03F0 | 0x0824 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| 15 | 263 bytes | supported | SCM Microsystems Inc. | SCR 331-DI | ![]() | 0x04E6 | 0x5111 | 4 | 3 | 0xFF | 1.00 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | You have to upgrade the firmware using version 5.18 or later. The contactless interface is not supported. | 0.4.0 | |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 16 | 263 bytes | supported | SCM Microsystems Inc. | SCR 355 | ![]() | 0x04E6 | 0x5410 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 17 | 263 bytes | shouldwork | Axalto | Reflex USB v3 | ![]() | 0x04E6 | 0x511C | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.1 | |||
| 18 | 263 bytes | shouldwork | SCM Microsystems Inc. | SCR331-DI USB Smart Card Reader | ![]() | 0x04E6 | 0x5120 | 4 | 3 | 0xFF | 1.00 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 255 | 255 | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 0.9.4 | |
| 19 | 263 bytes | shouldwork | SCM Microsystems Inc. | SCR3310 USB Smart Card Reader | ![]() | 0x04E6 | 0x511F | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 20 | 263 bytes | unsupported | ActivCard | ActivCard USB Reader V2 | ![]() | 0x09C3 | 0x0008 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | The reader do timeout when a special USB frame is sent from the reader. If the frame size if a multiple of wMaxPacketSize the communication is stopped. Some users report that this reader is in fact a SCR-331 with a different firmware and that you can upgrade its firmware to transform it into a (supported) SCR-331 reader. | 1.0.0 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 21 | 263 bytes | unsupported | Hewlett-Packard Company | HP USB Smart Card Keyboard | ![]() | 0x03F0 | 0x1024 | 4 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | SECURITY ALERT: Martin P. reported that on Mac OS X the pinpad feature does not work correctly and the PIN code is sent to the host (instead of being kept secret by the pinpad) | 1.1.0 | |
| 22 | 266 bytes | shouldwork | REINER SCT | cyberJack RFID basis | ![]() | 0x0C4B | 0x9102 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 1.000 MHz | 1.000 MHz | 2688 bps | 2688 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B0 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 23 | 270 bytes | supported | Gemalto | Smart Enterprise Guardian Secure USB Device | ![]() | 0x08E6 | 0x8000 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 7.500 MHz | 20112 bps | 223200 bps | 252 | 0x00000000 | 0x00000000 | 0x0001007A | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.2 | |||
| 24 | 270 bytes | supported | SCM Microsystems Inc. | SPR 532 | ![]() | 0x04E6 | 0xE003 | 4 | 3 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 254 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | You have to upgrade the firmware using version 5.10 or later. | 0.3.2 | |
| 25 | 270 bytes | shouldwork | Gemalto | Smart Enterprise Guardian Secure USB Device | ![]() | 0x08E6 | 0x8108 | Smart Card Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 2.000 MHz | 4.000 MHz | 5376 bps | 250000 bps | 252 | 0x00000000 | 0x00000000 | 0x0001007A | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 26 | 270 bytes | shouldwork | OBERTHUR TECHNOLOGIES | ID-ONE TOKEN SLIM v2 | ![]() | 0x1A74 | 0xB111 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 12.000 MHz | 12903 bps | 825807 bps | 252 | 0x00000000 | 0x00000000 | 0x00010200 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 27 | 270 bytes | shouldwork | Secure Device Solutions | DOMINO-Key TWIN | ![]() | 0x0B81 | 0x8007 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 12.000 MHz | 12903 bps | 825807 bps | 252 | 0x00000000 | 0x00000000 | 0x00010200 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.5 | ||||
| 28 | 270 bytes | disabled | Reiner-SCT | cyberJack pinpad(a) | ![]() | 0x0C4B | 0x0300 | 0 | 3 | 0xFF | 10.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10072 bps | 250000 bps | 254 | 0x00000007 | 0x00000000 | 0x00010030 | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Time requests are not managed and the driver may time out without any response from the reader. This is not a problem unless you use a time-consuming APDU like RSA key generation. Reiner provides a free software driver for this reader: http://support.reiner-sct.de/ | 1.3.1 | |
| 29 | 271 bytes | supported | ACS | ACR 38U-CCID | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Old versions of this reader are bogus: the reader do timeout when a special USB frame is sent from the reader. If the frame size is a multiple of wMaxPacketSize the communication is stopped. | 1.0.0 | ||
| 30 | 271 bytes | supported | Athena | ASEDrive IIIe KB | ![]() | 0x0DC3 | 0x1102 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Firmware older than 6.07 is bogus | 1.0.1 | |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 31 | 271 bytes | supported | Athena | ASE IIIe | ![]() | 0x0DC3 | 0x1004 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 32 | 271 bytes | supported | Alcor Micro | AU9520 | ![]() | 0x058F | 0x9520 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | Firmware 1.01 is bogus. The time request sent by the card is not forwarded by the reader to the host. | 1.1.0 | |
| 33 | 271 bytes | supported | ActivIdentity | USB Reader V3 | ![]() | 0x09C3 | 0x0013 | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 34 | 271 bytes | supported | ActivIdentity | Activkey Sim | ![]() | 0x09C3 | 0x0014 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.1.0 | |||
| 35 | 271 bytes | supported | COVADIS | ALYA | ![]() | 0x0982 | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | 1.3.6 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 36 | 271 bytes | supported | OMNIKEY AG | CardMan 3121 | ![]() | 0x076B | 0x3021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.000 MHz | 12.000 MHz | 8065 bps | 96774 bps | 254 | 0x00000007 | 0x00000000 | 0x000205B2 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 0.1.0 | ||
| 37 | 271 bytes | supported | Cherry GmbH | SmartTerminal XX44 | ![]() | 0x046A | 0x002D | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 0.9.4 | ||
| 38 | 271 bytes | supported | Cherry GmbH | SmartBoard XX33 | ![]() | 0x046A | 0x0005 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 0 | 0 | 0x0000 | 0x01 | 1 | PIN Verification | No extended APDU | 0.9.0 | |
| 39 | 271 bytes | supported | Cherry GmbH | SmartBoard XX44 | ![]() | 0x046A | 0x0010 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 0.9.3 | |
| 40 | 271 bytes | supported | Eutron | CryptoIdentity CCID | ![]() | 0x073D | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 41 | 271 bytes | supported | Dell | Dell Smart Card Reader Keyboard | ![]() | 0x413C | 0x2101 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | PIN Verification | Seems to support SPE only if the VERIFY command has a fixed length. See http://www.opensc-project.org/pipermail/opensc-devel/2011-May/016726.html | 0.9.0 | |
| 42 | 271 bytes | supported | Dell | keyboard SK-3106 | ![]() | 0x413C | 0x2100 | ????? | 3 | 0xFF | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | PIN Verification | 0.9.0 | ||
| 43 | 271 bytes | supported | Eutron | CryptoIdentity CCID | ![]() | 0x073D | 0x0008 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 44 | 271 bytes | supported | Eutron | Digipass 860 | ![]() | 0x073D | 0x0B00 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 45 | 271 bytes | supported | Eutron | Card Reader | ![]() | 0x073D | 0x0C00 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The device contains a hub with 3 devices: 2 CCID card readers and a USB Mass storage | 1.4.2 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 46 | 271 bytes | supported | Eutron | SIM Reader | ![]() | 0x073D | 0x0C00 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The device contains a hub with 3 devices: 2 CCID card readers and a USB Mass storage | 1.4.2 | ||
| 47 | 271 bytes | supported | Eutron | Smart Pocket | ![]() | 0x073D | 0x0C01 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 48 | 271 bytes | supported | Gemalto | GemCore SIM Pro Smart Card Reader | ![]() | 0x08E6 | 0x3480 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x01 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 2 slots | 1.0.0 | ||
| 49 | 271 bytes | supported | Gemalto | Gemplus USB SmartCard Reader 433-Swap | ![]() | 0x08E6 | 0x4433 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 0 | 0 | 0x0000 | 0x00 | 1 | No extended APDU | 0.1.0 | ||
| 50 | 271 bytes | supported | Gemalto | USB Shell Token V2 | ![]() | 0x08E6 | 0x3438 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.1.0 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 51 | 271 bytes | supported | Gemalto | USB GemPCPinpad SmartCard Reader | ![]() | 0x08E6 | 0x3478 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Known problems/limitations: Does not support minimum PIN length (wPINMaxExtraDigit) lower than 4 Does not support maximum PIN length (wPINMaxExtraDigit) greater than 8 Does send a VERIFY PIN command with an empty PIN to get the number of remaining trials. This may be problematic with some smart cards like the Belgian eID card that does not support this and will decrement the counter | 1.0.0 | |
| 52 | 271 bytes | supported | Gemalto | PC Twin Reader | ![]() | 0x08E6 | 0x3437 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | serial | 0.1.0 | ||
| 53 | 271 bytes | supported | Gemalto | Prox Dual USB PC LinkReader | ![]() | 0x08E6 | 0x5503 | Prox-DU Contact interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader, contactless | 1.4.2 | ||
| 54 | 278 bytes | supported | Gemalto | Prox Dual USB PC LinkReader | ![]() | 0x08E6 | 0x5503 | Prox-DU Contactless interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader, contactless | No extended APDU | 1.4.2 | |
| 55 | 271 bytes | supported | Gemalto | Prox SU USB PC LinkReader | ![]() | 0x08E6 | 0x5504 | Prox-SU Contact interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader, contactless | 1.4.2 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 56 | 278 bytes | supported | Gemalto | Prox SU USB PC LinkReader | ![]() | 0x08E6 | 0x5504 | Prox-SU Contactless interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader, contactless | No extended APDU | 1.4.2 | |
| 57 | 271 bytes | supported | Gemalto | EZIO CB+ | ![]() | 0x08E6 | 0x34C3 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.4 | ||
| 58 | 271 bytes | supported | Gemalto | Ezio Shield | ![]() | 0x08E6 | 0x34C0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.4 | ||
| 59 | 271 bytes | supported | KOBIL | KAAN SIM III | ![]() | 0x0D46 | 0x3003 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 0.9.3 | ||
| 60 | 271 bytes | supported | C3PO | LTC31 v2 | ![]() | 0x0783 | 0x0006 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | New model with USB product ID 0x0006 | 1.1.0 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 61 | 271 bytes | supported | Lenovo | Integrated Smart Card Reader | ![]() | 0x17EF | 0x1003 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 62 | 271 bytes | supported | MYSMART | MySMART PAD V2.0 | ![]() | 0x09BE | 0x0002 | 0 | 3 | 0xFF | 1.00 | 0x00 | 0x00 | 0x0000 0x0300 | 1024.000 MHz | 1024.000 MHz | 10752 bps | 129032 bps | 0 | 0x00000000 | 0x03000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 63 | 271 bytes | supported | Precise Biometrics | Sense MC | ![]() | 0x076B | 0xA022 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | biometric | No extended APDU | 1.4.5 | |
| 64 | 271 bytes | supported | SCM Microsystems Inc. | SCR 331 | ![]() | 0x04E6 | 0xE001 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. | 0.1.0 | ||
| 65 | 271 bytes | supported | SCM Microsystems Inc. | SCR 3310 | ![]() | 0x04E6 | 0x5116 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 0.9.3 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 66 | 271 bytes | supported | SCM Microsystems Inc. | SCR 3311 | ![]() | 0x04E6 | 0x511D | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 67 | 271 bytes | supported | XIRING | Teo | ![]() | 0x076B | 0xA022 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.2.0 | ||
| 68 | 271 bytes | supported | Verisign | Secure Storage Token | ![]() | 0x08E6 | 0x1359 | 0 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 69 | 271 bytes | supported | Verisign | Secure Token | ![]() | 0x08E6 | 0xACE0 | 0 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0 | 0 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 70 | 271 bytes | supported | XIRING | Leo v2 | ![]() | 0x0F14 | 0x0038 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.1 | |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 71 | 271 bytes | supported | XIRING | XI-SIGN USB V2 | ![]() | 0x0F14 | 0x0011 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.600 MHz | 3.600 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0xFF | 0xFF | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.9 | |
| 72 | 271 bytes | supported | id3 Semiconductors | CL1356T | ![]() | 0x0B81 | 0x0200 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 73 | 271 bytes | shouldwork | ACS | ACR122U | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.5 | |||
| 74 | 271 bytes | shouldwork | ACS | ACR100 | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 75 | 271 bytes | shouldwork | ACS | ACR101 ICC Reader | ![]() | 0x072F | 0x1204 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | SVN | ||||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 76 | 271 bytes | shouldwork | ACS | ACR38 plugin | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 77 | 271 bytes | shouldwork | ACS | AET65 | ![]() | 0x072F | 0x90CC | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 78 | 271 bytes | shouldwork | ACS | APG8201 PINhandy 1 | ![]() | 0x072F | 0x8201 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.2 | ||
| 79 | 271 bytes | shouldwork | ATMEL | AT90SCR050 | ![]() | 0x03EB | 0x6011 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344064 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 80 | 271 bytes | shouldwork | ATMEL | AT90SCR100 | ![]() | 0x03EB | 0x6010 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344064 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 81 | 271 bytes | shouldwork | ATMEL | AT91SC192192CT-USB ICCD reader | ![]() | 0x03EB | 0x600B | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.11 | |
| 82 | 271 bytes | shouldwork | ATMEL | AT91SO CCID Smart Card Reader | ![]() | 0x03EB | 0x6004 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x07 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 256 | 0x00000000 | 0x00000000 | 0x0002005E | 0xFF | 0xFF | 0x0210 | 0x00 | 1 | 2 slots | No extended APDU | 1.3.9 | |
| 83 | 271 bytes | shouldwork | ATMEL | AT98SC032CT-USB | ![]() | 0x03EB | 0x6009 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| 84 | 271 bytes | shouldwork | ATMEL | VaultIC420 Smart Object | ![]() | 0x03EB | 0x6012 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 85 | 271 bytes | shouldwork | ATMEL | VaultIC440 | ![]() | 0x03EB | 0x6014 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 86 | 271 bytes | shouldwork | ATMEL | VaultIC460 | ![]() | 0x03EB | 0x6016 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 87 | 271 bytes | shouldwork | Akasa | AK-CR-03 | ![]() | 0x058F | 0x9520 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.1 | ||
| 88 | 271 bytes | shouldwork | Aktiv | Rutoken ECP | ![]() | 0x0A89 | 0x0030 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.11 | |
| 89 | 271 bytes | shouldwork | Aktiv | Rutoken lite | ![]() | 0x0A89 | 0x0025 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.4.2 | |
| 90 | 271 bytes | shouldwork | Alcor Micro | AU9522 | ![]() | 0x058F | 0x9522 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x01 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 2 slots | No extended APDU | Built in reader for the "Friio USB2.0 DTV Receiver" | SVN | |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 91 | 271 bytes | shouldwork | Alcor Micro | SCR001 | ![]() | 0x058F | 0x9520 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.11 | ||
| 92 | 271 bytes | shouldwork | ASK-RFID | CPL108 | ![]() | 0x1FD3 | 0xCC1D | Contactless | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x000400FE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 93 | 271 bytes | shouldwork | Athena | IDProtect Key v2 | ![]() | 0x0DC3 | 0x0900 | Main Interface | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 252 | 0x00000000 | 0x00000000 | 0x0001023C | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Be to have a v2 token (bcdDevice: 2.00). The V1 token is bogus: PPS to set the card in T=1 fails. See http://www.opensc-project.org/pipermail/opensc-user/2010-May/004023.html | 1.3.12 | ||
| 94 | 271 bytes | shouldwork | Avtor | SC Reader 371 | ![]() | 0x15CF | 0x001D | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 10.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.571 MHz | 3.571 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | |||
| 95 | 271 bytes | shouldwork | Avtor | SecureToken | ![]() | 0x15CF | 0x0019 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 10.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.571 MHz | 3.571 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 96 | 271 bytes | shouldwork | BIFIT | iBank2Key | ![]() | 0x23A0 | 0x0002 | iBank2Key | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 64 | 0x00000000 | 0x00000000 | 0x00000840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.4.5 | ||
| 97 | 271 bytes | shouldwork | HDZB | uKeyCI800-K18 | ![]() | 0x1677 | 0x0025 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 98 | 271 bytes | shouldwork | BLUTRONICS | BLUDRIVE II CCID | ![]() | 0x1B0E | 0x1078 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x00010130 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.3 | |||
| 99 | 271 bytes | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5800 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | found in Dell E6500 laptop Update the reader firmware using http://support.dell.com/support/downloads/download.aspx?c=us&cs=555&l=en&s=biz&releaseid=R254263&SystemID=LAT_E6400&servicetag=&os=WLH&osl=en&deviceid=21505&devlib=0&typecnt=0&vercnt=5&catid=-1&impid=-1&formatcnt=0&libid=60&typeid=-1&dateid=-1&formatid=-1&fileid=372654 The previous firmware generated the following errors: No communication to the device ("Resource temporarily unavailable" error) The reader reports "Hardware error" to GetSlotStatus when no card is present. | 1.3.9 | ||
| 100 | 271 bytes | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5802 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 101 | 271 bytes | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5802 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader | 1.4.2 | ||
| 102 | 512 bytes | shouldwork | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5802 | Contactless SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader | No extended APDU | 1.4.2 | |
| 103 | 271 bytes | shouldwork | C3PO | KBR36 | ![]() | 0x0783 | 0x0009 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.2.0 | ||
| 104 | 271 bytes | shouldwork | C3PO | LTC32 | ![]() | 0x0783 | 0x0010 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.2.0 | ||
| 105 | 271 bytes | shouldwork | C3PO | TLTC2USB | ![]() | 0x0783 | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000001 | 0x00000000 | 0x000100BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 106 | 271 bytes | shouldwork | OMNIKEY | CardMan 1021 | ![]() | 0x076B | 0x1021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.692 MHz | 3.692 MHz | 9924 bps | 317591 bps | 254 | 0x00000007 | 0x00000000 | 0x000103B1 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| 107 | 271 bytes | shouldwork | OMNIKEY AG | CardMan 3021 | ![]() | 0x076B | 0x3021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.1.0 | ||
| 108 | 271 bytes | shouldwork | OMNIKEY AG | CardMan 3621 | ![]() | 0x076B | 0x3621 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | Does not support minimum PIN length (wPINMaxExtraDigit) lower than 5 | 1.0.1 |
| 109 | 271 bytes | shouldwork | OMNIKEY AG | CardMan 3821 | ![]() | 0x076B | 0x3821 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | Does not support minimum PIN length (wPINMaxExtraDigit) lower than 5 | 1.0.0 |
| 110 | 271 bytes | shouldwork | OMNIKEY | CardMan 4321 | ![]() | 0x076B | 0x4321 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ExpressCard | No extended APDU | The reader may report a card present if no card is inserted. See https://bugzilla.redhat.com/show_bug.cgi?id=531998 | 1.3.0 |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 111 | 271 bytes | shouldwork | OMNIKEY AG | CardMan 5121 | ![]() | 0x076B | 0x5121 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The RFID interface is not supported. | 1.2.0 |
| 112 | 271 bytes | shouldwork | OMNIKEY AG | CardMan 5125 | ![]() | 0x076B | 0x5125 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The HID PROX interface is not supported. | 1.0.0 |
| 113 | 271 bytes | shouldwork | OMNIKEY | CardMan 5321 | ![]() | 0x076B | 0x5321 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The RFID interface is not supported. | 1.3.1 |
| 114 | 271 bytes | shouldwork | OMNIKEY AG | CardMan 6121 | ![]() | 0x076B | 0x6622 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.0.0 | ||
| 115 | 271 bytes | shouldwork | charismathics | plug'n'crypt CCID token | ![]() | 0x19E7 | 0x0002 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 116 | 271 bytes | shouldwork | Cherry GmbH | SmartBoard XX1X | ![]() | 0x046A | 0x005B | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.5 | |
| 117 | 271 bytes | shouldwork | Cherry GmbH | SmartTerminal XX1X | ![]() | 0x046A | 0x0070 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.9 | ||
| 118 | 271 bytes | shouldwork | Cherry GmbH | SmartTerminal ST-1275 | ![]() | 0x046A | 0x0072 | Smart Card Reader CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The contactless interface is not supported. | 1.3.12 |
| 119 | 271 bytes | shouldwork | COVADIS | Auriga | ![]() | 0x0982 | 0x0040 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 10.01 | 0x02 | 0x07 | 0x0000 0x0003 | 2.000 MHz | 2.000 MHz | 5376 bps | 21504 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 0x00 | 0x00 | 0x0000 | 0x00 | 2 | biometric, 3 slots | No extended APDU | 1.3.12 | |
| 120 | 271 bytes | shouldwork | Dectel | CI692 | ![]() | 0x0BDA | 0x0165 | Smart Card Reader Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 121 | 271 bytes | shouldwork | Feitian Technologies | FT SCR310 | ![]() | 0x096E | 0x0505 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 600000 bps | 248 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 0 | 1.4.2 | |||
| 122 | 271 bytes | shouldwork | Fujitsu Siemens Computers | SmartCard Keyboard USB 2A | ![]() | 0x0BF8 | 0x1005 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.0 | |
| 123 | 271 bytes | shouldwork | Fujitsu Siemens Computers | SmartCard USB 2A | ![]() | 0x0BF8 | 0x1006 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.0 | |
| 124 | 271 bytes | shouldwork | FujitsuTechnologySolutions GmbH | SmartCase KB SCR eSIG | ![]() | 0x0BF8 | 0x1017 | SmartCase Smartcard Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 307200 bps | 252 | 0x00000000 | 0x00000001 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.6 | ||
| 125 | 271 bytes | shouldwork | German Privacy Foundation | Crypto Stick v1.2 | ![]() | 0x20A0 | 0x4107 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0002 | 3.600 MHz | 3.600 MHz | 9677 bps | 116129 bps | 254 | 0x00000000 | 0x00000000 | 0x000104BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 126 | 271 bytes | shouldwork | Gemplus | GemCore POS Pro Smart Card Reader | ![]() | 0x08E6 | 0x3479 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x04 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 5 slots | 1.4.4 | |||
| 127 | 271 bytes | shouldwork | Gemalto | USB GemPCPinpad SmartCard Reader | ![]() | 0x08E6 | 0x3478 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.13 | ||
| 128 | 271 bytes | shouldwork | Gemalto | GemPC Express | ![]() | 0x08E6 | 0x34EC | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ExpressCard | 1.0.0 | ||
| 129 | 271 bytes | shouldwork | Gemalto | Gem e-Seal Pro USB Token | ![]() | 0x08E6 | 0x2202 | 0 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.5 | |||
| 130 | 271 bytes | shouldwork | Gemalto | Ezio Shield Branch Reader | ![]() | 0x08E6 | 0x34C5 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x000204B2 | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | SVN | |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 131 | 271 bytes | shouldwork | Gemalto | Ezio Shield | ![]() | 0x08E6 | 0x34C2 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.5 | |||
| 132 | 271 bytes | shouldwork | Gemalto | Hybrid Smartcard Reader | ![]() | 0x08E6 | 0x5743 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x02 | 0x0000 0x0001 | 3.686 MHz | 3.686 MHz | 9910 bps | 9910 bps | 0 | 0x00000000 | 0x00000000 | 0x00010070 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 2 slots | 1.3.12 | ||
| 133 | 271 bytes | shouldwork | Gemalto | SA .NET Dual | ![]() | 0x08E6 | 0x4042 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 1.500 MHz | 1.500 MHz | 4032 bps | 23437 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.5 | |||
| 134 | 271 bytes | shouldwork | Hewlett Packard | MFP Smart Card Reader | ![]() | 0x03F0 | 0x2924 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.9 | |||
| 135 | 271 bytes | shouldwork | Inside Secure | VaultIC 460 Smart Object | ![]() | 0x2406 | 0x6302 | ICCD 1.00 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.4.6 | |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 136 | 271 bytes | shouldwork | Kingtrust | Multi-Reader | ![]() | 0x0483 | 0x0007 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 137 | 271 bytes | shouldwork | C3PO | LTC36 | ![]() | 0x0783 | 0x0036 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 138 | 271 bytes | shouldwork | MSI | StarReader SMART | ![]() | 0x0BDA | 0x0161 | Smart Card Reader Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | You may need to unload/blacklist the mceusb Linux kernel driver to use the device. | 1.3.10 | ||
| 139 | 271 bytes | shouldwork | Macally | NFC CCID eNetPad | ![]() | 0x08AE | 0x0BDF | Macally CCID READER | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 256 | 0x00000000 | 0x00000000 | 0x00020040 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| 140 | 271 bytes | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x8033 | 5 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 141 | 271 bytes | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x0013 | 5 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 142 | 271 bytes | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x0033 | Weneo Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 143 | 271 bytes | shouldwork | Neowave | Weneo | ![]() | 0x1E0D | 0x1023 | Weneo SIM Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x0001023A | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.3 | |||
| 144 | 271 bytes | shouldwork | OMNIKEY | 6321 CLi USB | ![]() | 0x076B | 0x6321 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| 145 | 271 bytes | shouldwork | OMNIKEY AG | Smart Card Reader | ![]() | 0x076B | 0xA021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.692 MHz | 3.692 MHz | 9924 bps | 119096 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.10 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 146 | 271 bytes | shouldwork | Panasonic | Panasonic USB Smart Card Reader 7A-Smart | ![]() | 0x04DA | 0x117A | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 147 | 271 bytes | shouldwork | Raritan | D2CIM-DVUSB VM/CCID | ![]() | 0x14DD | 0x1006 | 18 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010238 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 148 | 271 bytes | shouldwork | SCM Microsystems Inc. | SDI011 Contactless Reader | ![]() | 0x04E6 | 0x512B | Vendor Interface | 3 | 0xFF | 1.10 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 1.4.6 | |
| 149 | 271 bytes | shouldwork | SCM Microsystems Inc. | SCR3320 - Smart Card Reader | ![]() | 0x04E6 | 0x5117 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 150 | 271 bytes | shouldwork | SCM Microsystems Inc. | SCR33x USB Smart Card Reader | ![]() | 0x04E6 | 0x5113 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 151 | 271 bytes | shouldwork | SCM Microsystems Inc. | SCR3340 - ExpressCard54 Smart Card Reader | ![]() | 0x04E6 | 0x5119 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ExpressCard | 1.0.0 | ||
| 152 | 271 bytes | shouldwork | SCM Microsystems Inc. | SCR 335 | ![]() | 0x04E6 | 0x5115 | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. Or use a v2.0 model. | 0.1.0 | ||
| 153 | 271 bytes | shouldwork | SCM Microsystems Inc. | SCR35xx v2.0 USB SC Reader | ![]() | 0x04E6 | 0x5410 | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 154 | 271 bytes | shouldwork | SCM Microsystems Inc. | SDI010 Smart Card Reader | ![]() | 0x04E6 | 0x5121 | 4 | 3 | 0xFF | 1.10 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 1.0.1 | |
| 155 | 271 bytes | shouldwork | Sitecom | Sitecom USB simcard reader MD-010 | ![]() | 0x0DF6 | 0x800A | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.0 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 156 | 271 bytes | shouldwork | Softforum Co., Ltd | XecureHSM | ![]() | 0x04E8 | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 157 | 271 bytes | shouldwork | SpringCard | CSB6 Basic | ![]() | 0x1C34 | 0x7121 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.3.9 | |
| 158 | 271 bytes | shouldwork | SpringCard | CSB6 Secure | ![]() | 0x1C34 | 0x7123 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x02 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 3 slots | No extended APDU | 1.3.9 | |
| 159 | 271 bytes | shouldwork | SpringCard | CSB6 Ultimate | ![]() | 0x1C34 | 0x7124 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x04 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 5 slots | No extended APDU | 1.3.9 | |
| 160 | 271 bytes | shouldwork | SpringCard | CrazyWriter | ![]() | 0x1C34 | 0x7113 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x02 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 3 slots | No extended APDU | 1.3.9 | |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 161 | 271 bytes | shouldwork | SpringCard | EasyFinger Standard | ![]() | 0x1C34 | 0x7136 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | No extended APDU | 1.3.9 | |
| 162 | 271 bytes | shouldwork | SpringCard | EasyFinger Ultimate | ![]() | 0x1C34 | 0x7138 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x03 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 4 slots | No extended APDU | 1.3.9 | |
| 163 | 271 bytes | shouldwork | SpringCard | Prox'N'Roll | ![]() | 0x1C34 | 0x7141 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.3.9 | |
| 164 | 271 bytes | shouldwork | SYNNIX | STD200 | ![]() | 0x1206 | 0x2105 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 165 | 271 bytes | shouldwork | Teridian Semiconductors | TSC12xxFV.09 | ![]() | 0x1862 | 0x0000 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x04 | 0x03 | 0x0000 0x0003 | 3.600 MHz | 8.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000405F2 | 0xFF | 0xFF | 0x0000 | 0x00 | 5 | 5 slots | 1.4.6 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 166 | 271 bytes | shouldwork | Tianyu | Smart Card Reader | ![]() | 0xA625 | 0x0810 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 167 | 271 bytes | shouldwork | Todos | Argos Mini II | ![]() | 0x0B0C | 0x0050 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | Use at least firmware 1.01. The previous one is bogus. | 1.3.12 | |
| 168 | 271 bytes | shouldwork | Todos | CX00 | ![]() | 0x0B0C | 0x0052 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0x00 | 0x00 | 0x0211 | 0x00 | 1 | No extended APDU | 1.4.0 | ||
| 169 | 271 bytes | shouldwork | VASCO | DIGIPASS KEY 202 | ![]() | 0x1A44 | 0x0120 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 170 | 271 bytes | shouldwork | VASCO | DIGIPASS KEY 202 | ![]() | 0x1A44 | 0x0122 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 171 | 271 bytes | shouldwork | VASCO | DIGIPASS KEY 200 | ![]() | 0x1A44 | 0x0119 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 172 | 271 bytes | shouldwork | VASCO | DP855 | ![]() | 0x1A44 | 0x0855 | 3 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 0x00 | 0x00 | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 173 | 271 bytes | shouldwork | VASCO | DIGIPASS KEY 860 | ![]() | 0x1A44 | 0x0117 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 174 | 271 bytes | shouldwork | VASCO | DP865 | ![]() | 0x1A44 | 0x0865 | 3 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 0x00 | 0x00 | 0x0818 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 175 | 271 bytes | shouldwork | VASCO | DP905 | ![]() | 0x1A44 | 0x0001 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.6 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 176 | 271 bytes | shouldwork | VASCO | DIGIPASS KEY 200 | ![]() | 0x1A44 | 0x0115 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 177 | 271 bytes | shouldwork | VASCO | DIGIPASS KEY 860 | ![]() | 0x1A44 | 0x0112 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 178 | 271 bytes | shouldwork | VASCO | DIGIPASS 920 | ![]() | 0x1A44 | 0x0920 | CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.3 | ||
| 179 | 271 bytes | shouldwork | COVADIS | VEGA-ALPHA | ![]() | 0x0982 | 0x0008 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.6 | ||
| 180 | 271 bytes | shouldwork | XIRING | XI-SIGN USB V2 | ![]() | 0x0F14 | 0x0011 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.600 MHz | 3.600 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0xFF | 0xFF | 0x020C | 0x00 | 1 | No extended APDU | 1.3.9 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 181 | 271 bytes | shouldwork | Bit4id | cryptokey | ![]() | 0x25DD | 0x1201 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 182 | 271 bytes | shouldwork | Bit4id | iAM | ![]() | 0x25DD | 0x2221 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 183 | 271 bytes | shouldwork | Bit4id | CKey4 | ![]() | 0x25DD | 0x2321 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 184 | 271 bytes | shouldwork | Bit4id | miniLector-s | ![]() | 0x25DD | 0x1101 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 185 | 271 bytes | shouldwork | Bit4id | miniLector | ![]() | 0x25DD | 0x3111 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 186 | 271 bytes | shouldwork | Generic | USB2.0-CRW | ![]() | 0x0BDA | 0x0169 | 6 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 187 | 271 bytes | shouldwork | id3 Semiconductors | CL1356A_HID | ![]() | 0x0B81 | 0x0220 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.7 | ||
| 188 | 271 bytes | shouldwork | id3 Semiconductors | CL1356T5 | ![]() | 0x0B81 | 0x0200 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 189 | 271 bytes | unsupported | ACS | ACR122U PICC Interface | ![]() | 0x072F | 0x2200 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 256 | 0x00000000 | 0x00000000 | 0x00020040 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | contactless | No extended APDU | Time extension requests are not supported. Firmwares version < 2.06 are bogus: APDU with 0x7B (123) bytes expected do not work with a 14443 card. The reader returns SW=63 00 instead. | 1.3.9 |
| 190 | 271 bytes | unsupported | Aladdin | eToken PRO USB 72K Java | ![]() | 0x0529 | 0x0620 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 49 | 0x00000000 | 0x00000000 | 0x0001023C | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The token does not work after a warm reset. See http://www.opensc-project.org/pipermail/opensc-devel/2009-April/012128.html | 1.3.9 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 191 | 271 bytes | unsupported | Broadcom Corp | 5880 | ![]() | 0x0A5C | 0x5801 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Found in Dell E6400 laptop The reader reports "Hardware error" to GetSlotStatus when no card is present. | 1.3.12 | ||
| 192 | 271 bytes | unsupported | Hewlett-Packard Company | HP USB CCID Smartcard Keyboard | ![]() | 0x03F0 | 0x0036 | HP USB CCID Keyboard Smartcard Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 307200 bps | 252 | 0x00000000 | 0x00000001 | 0x000100BA | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | WARNING: Secure Pin Entry feature is bogus and has been disabled. firmware < 1.24 is bogus. SetParameters fails with a card of ATR 3B 16 96 41 73 74 72 69 64. The smart card reader part is from SCM. | 1.4.1 | |
| 193 | 271 bytes | unsupported | C3PO | LTC3x USB | ![]() | 0x0783 | 0x0003 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00010002 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The reader works fine with Linux kernel 2.4 but does not with Linux kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument). This reader is not more sold and replaced by the LTC31v2 model. | 0.1.0 | ||
| 194 | 271 bytes | unsupported | O2 | Micro Oz776 | ![]() | 0x0B97 | 0x7762 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops like the Dell D420 or D820. The ATR may be corrupted by a 90 00 at the end The reader is bogus and does not accept PPS | 0.9.3 | ||
| 195 | 271 bytes | unsupported | O2 | Micro Oz776 | ![]() | 0x0B97 | 0x7772 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops. The reader is bogus and does not accept PPS | 1.3.1 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 196 | 271 bytes | unsupported | KOBIL Systems | mIDentity M | ![]() | 0x0D46 | 0x4000 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | Time requests are not managed correctly and make the firmware fail. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | 0.9.3 | |
| 197 | 271 bytes | unsupported | RSA | RSA SecurID (R) Authenticator | ![]() | 0x15E1 | 0x2007 | MSD | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x02 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 125000 bps | 254 | 0x00000000 | 0x00000000 | 0x000100BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | the new firmware (revision 6284) fails to respond to initial CmdGetSlotStatus() with "ccid_usb.c:687:ReadUSB() read failed (5/2): -8 Success" or with "<- 000000 81 FB FF FF FF" "commands.c:1046:CmdGetSlotStatus() Not enough data received: 5 bytes" | 0.9.4 | ||
| 198 | 271 bytes | disabled | SCM Microsystems Inc. | SCL010 Contactless Reader | ![]() | 0x04E6 | 0x5291 | 4 | 3 | 0xFF | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 13.560 MHz | 13.560 MHz | 106000 bps | 848000 bps | 254 | 0x00000000 | 0x00000001 | 0x0001007E | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | The contactless interface is not supported. | 1.3.11 | |
| 199 | 271 bytes | disabled | SCM Microsystems Inc. | SCL01x Contactless Reader | ![]() | 0x04E6 | 0x5292 | SCL01x Contactless Reader | 3 | 0xFF | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 13.560 MHz | 13.560 MHz | 106000 bps | 848000 bps | 254 | 0x00000000 | 0x00000001 | 0x0001007E | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | The contactless interface is not supported. | 1.3.12 | |
| 200 | 271 bytes | disabled | SMART | SBV280 | ![]() | 0x0B8C | 0x000E | CCID 1.1 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | Removed on manufacturer request. They use libusb directly in their own driver. | 1.3.12 |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 201 | 271 bytes | disabled | THRC | USB Smart Card Reader | ![]() | 0x062D | 0x0001 | SCR Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | also known as ID-SMID01, SCT018 and maybe other commercial names PPS fails with a Cryptoflex card Powerup fails with a Setcos card | 1.1.0 | ||
| 202 | 271 bytes | disabled | jNet Technology inc. | jToken s1 | ![]() | 0x0483 | 0x2010 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00010840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.9 | ||
| 203 | 272 bytes | supported | Alcor Micro | AU9540 | ![]() | 0x058F | 0x9540 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.5 | |||
| 204 | 272 bytes | supported | Giesecke & Devrient GmbH | StarSign Crypto USB Token | ![]() | 0x1059 | 0x0017 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 205 | 272 bytes | shouldwork | BIFIT | USB-Token iBank2key | ![]() | 0x23A0 | 0x0001 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0002 | 5.000 MHz | 5.000 MHz | 13440 bps | 430107 bps | 254 | 0x00000000 | 0x00000000 | 0x000205B8 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.5 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 206 | 272 bytes | shouldwork | VASCO | DIGIPASS KEY 101 | ![]() | 0x1A44 | 0x0101 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 207 | 272 bytes | unsupported | Feitian | SCR301 | ![]() | 0x096E | 0x0503 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 240 | 0x00000000 | 0x00000000 | 0x000102B8 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | The reader fails with a CASE 2 APDU with Le=0 (256 bytes) Sent: 80 34 01 00 00 ifdhandler.c:1219:IFDHTransmitToICC() no name (lun: 0) commands.c:1542:CmdXfrBlockTPDU_T0() T=0: 5 bytes -> 000000 6F 05 00 00 00 00 07 00 00 00 80 34 01 00 00 <- 000000 80 00 00 00 00 00 07 40 FE 00 commands.c:1316:CCID_Receive Card absent or mute And time extension requests are not forwarded back to the host. A new version of the reader is available and may fix this issue. | 1.3.11 | ||
| 208 | 273 bytes | shouldwork | NXP | PR533 | ![]() | 0x1FC9 | 0x010B | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.685 MHz | 13.560 MHz | 9909 bps | 216960000 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | SVN | |||
| 209 | 280 bytes | shouldwork | Giesecke & Devrient GmbH | Star Sign Card Token 350 (ICCD) | ![]() | 0x1059 | 0x000C | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| 210 | 288 bytes | shouldwork | ubisys | 13.56MHz RFID (CCID) | ![]() | 0x19A6 | 0x0009 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020042 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.4.5 | |
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 211 | 432 bytes | supported | KOBIL | KAAN Advanced | ![]() | 0x0D46 | 0x3002 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Firmware older than 0.37 is bogus | 0.9.3 | |
| 212 | 432 bytes | supported | KOBIL | KAAN Base | ![]() | 0x0D46 | 0x3001 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Firwmare older than 0.37 is bogus | 0.9.3 | ||
| 213 | 512 bytes | supported | TianYu CCID Key | TianYu CCID SmartKey | ![]() | 0xA625 | 0x0801 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 115200 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| 214 | 512 bytes | shouldwork | KOBIL Systems | mIDentity 4smart | ![]() | 0x0D46 | 0x4189 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 215 | 512 bytes | shouldwork | KOBIL Systems | mIDentity 4smart AES | ![]() | 0x0D46 | 0x41A9 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 216 | 512 bytes | shouldwork | KOBIL Systems | mIDentity fullsize | ![]() | 0x0D46 | 0x4389 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 217 | 512 bytes | shouldwork | KOBIL Systems | mIDentity fullsize AES | ![]() | 0x0D46 | 0x43A9 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 218 | 512 bytes | shouldwork | KOBIL Systems | mIDentity visual | ![]() | 0x0D46 | 0x4289 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 219 | 512 bytes | shouldwork | VMware | Virtual USB CCID | ![]() | 0x0E0F | 0x0004 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x0002004E | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.9 | |
| 220 | 512 bytes | unsupported | KOBIL Systems | mIDentity XL | ![]() | 0x0D46 | 0x4001 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Time requests are not managed correctly and make the firmware fail. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | 1.3.9 | ||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 221 | 522 bytes | supported | XIRING | MyLeo | ![]() | 0x0F14 | 0x0037 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 0xFF | 0xFF | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.2 | |
| 222 | 536 bytes | supported | KOBIL | EMV CAP - SecOVID Reader III | ![]() | 0x0D46 | 0x3010 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 2.000 MHz | 4.000 MHz | 10573 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.1 | ||
| 223 | 586 bytes | shouldwork | KOBIL Systems | Smart Token | ![]() | 0x0D46 | 0x3014 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412896 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 224 | 1024 bytes | shouldwork | Validy | TokenA sl vt | ![]() | 0x1CF0 | 0x0001 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.6 | |||
| 225 | 1041 bytes | shouldwork | CCB | eSafeLD | ![]() | 0x8829 | 0xCCB2 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 1041 | 0x00000000 | 0x00000000 | 0x00040672 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | ||||
| # | dwMaxCCIDMessageLength | section | iManufacturer | iProduct | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 226 | 2048 bytes | shouldwork | GoldKey Security | PIV Token | ![]() | 0x19C8 | 0x0012 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020870 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 227 | 2100 bytes | supported | Feitian | ePass2003 | ![]() | 0x096E | 0x0807 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 2048 | 0x00000000 | 0x00000000 | 0x00040840 | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.4.3 | ||
| 228 | 65550 bytes | unsupported | Precise Biometrics | Precise 200 MC | ![]() | 0x08C3 | 0x0402 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 7.500 MHz | 10753 bps | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html | 1.3.10 | |
| 229 | 65550 bytes | unsupported | Precise Biometrics | Precise 250 MC | ![]() | 0x08C3 | 0x0401 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 7.500 MHz | 10753 bps | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html | 1.3.6 |
Generated: Tue May 15 20:50:44 2012
Ludovic Rousseau