| supported | should work | unsupported | disabled |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 13.56MHz RFID (CCID) | shouldwork | ubisys | ![]() | 0x19A6 | 0x0009 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020042 | 288 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.4.5 | |
| 2 | 5880 | shouldwork | Broadcom Corp | ![]() | 0x0A5C | 0x5800 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | found in Dell E6500 laptop Update the reader firmware using http://support.dell.com/support/downloads/download.aspx?c=us&cs=555&l=en&s=biz&releaseid=R254263&SystemID=LAT_E6400&servicetag=&os=WLH&osl=en&deviceid=21505&devlib=0&typecnt=0&vercnt=5&catid=-1&impid=-1&formatcnt=0&libid=60&typeid=-1&dateid=-1&formatid=-1&fileid=372654 The previous firmware generated the following errors: No communication to the device ("Resource temporarily unavailable" error) The reader reports "Hardware error" to GetSlotStatus when no card is present. | 1.3.9 | ||
| 3 | 5880 | shouldwork | Broadcom Corp | ![]() | 0x0A5C | 0x5802 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 4 | 5880 | shouldwork | Broadcom Corp | ![]() | 0x0A5C | 0x5802 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader | 1.4.2 | ||
| 5 | 5880 | shouldwork | Broadcom Corp | ![]() | 0x0A5C | 0x5802 | Contactless SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 512 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader | No extended APDU | 1.4.2 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 6 | 5880 | unsupported | Broadcom Corp | ![]() | 0x0A5C | 0x5801 | Contacted SmartCard | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Found in Dell E6400 laptop The reader reports "Hardware error" to GetSlotStatus when no card is present. | 1.3.12 | ||
| 7 | 6321 CLi USB | shouldwork | OMNIKEY | ![]() | 0x076B | 0x6321 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| 8 | ACR 38U-CCID | supported | ACS | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Old versions of this reader are bogus: the reader do timeout when a special USB frame is sent from the reader. If the frame size is a multiple of wMaxPacketSize the communication is stopped. | 1.0.0 | ||
| 9 | ACR100 | shouldwork | ACS | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 10 | ACR101 ICC Reader | shouldwork | ACS | ![]() | 0x072F | 0x1204 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | SVN | ||||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 11 | ACR122U | shouldwork | ACS | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.5 | |||
| 12 | ACR122U PICC Interface | unsupported | ACS | ![]() | 0x072F | 0x2200 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 256 | 0x00000000 | 0x00000000 | 0x00020040 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | contactless | No extended APDU | Time extension requests are not supported. Firmwares version < 2.06 are bogus: APDU with 0x7B (123) bytes expected do not work with a 14443 card. The reader returns SW=63 00 instead. | 1.3.9 |
| 13 | ACR38 plugin | shouldwork | ACS | ![]() | 0x072F | 0x90CC | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 14 | AET65 | shouldwork | ACS | ![]() | 0x072F | 0x90CC | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 15 | AK-CR-03 | shouldwork | Akasa | ![]() | 0x058F | 0x9520 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.1 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 16 | ALYA | supported | COVADIS | ![]() | 0x0982 | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | 1.3.6 | ||
| 17 | APG8201 PINhandy 1 | shouldwork | ACS | ![]() | 0x072F | 0x8201 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.2 | ||
| 18 | ASE IIIe | supported | Athena | ![]() | 0x0DC3 | 0x1004 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 19 | ASEDrive IIIe KB | supported | Athena | ![]() | 0x0DC3 | 0x1102 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Firmware older than 6.07 is bogus | 1.0.1 | |
| 20 | AT90SCR050 | shouldwork | ATMEL | ![]() | 0x03EB | 0x6011 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344064 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 21 | AT90SCR100 | shouldwork | ATMEL | ![]() | 0x03EB | 0x6010 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344064 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 22 | AT91SC192192CT-USB ICCD reader | shouldwork | ATMEL | ![]() | 0x03EB | 0x600B | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.11 | |
| 23 | AT91SO CCID Smart Card Reader | shouldwork | ATMEL | ![]() | 0x03EB | 0x6004 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x07 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 256 | 0x00000000 | 0x00000000 | 0x0002005E | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x00 | 1 | 2 slots | No extended APDU | 1.3.9 | |
| 24 | AT98SC032CT-USB | shouldwork | ATMEL | ![]() | 0x03EB | 0x6009 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| 25 | AU9520 | supported | Alcor Micro | ![]() | 0x058F | 0x9520 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | Firmware 1.01 is bogus. The time request sent by the card is not forwarded by the reader to the host. | 1.1.0 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 26 | AU9522 | shouldwork | Alcor Micro | ![]() | 0x058F | 0x9522 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x01 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 2 slots | No extended APDU | Built in reader for the "Friio USB2.0 DTV Receiver" | SVN | |
| 27 | AU9540 | supported | Alcor Micro | ![]() | 0x058F | 0x9540 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.5 | |||
| 28 | ActivCard USB Reader V2 | unsupported | ActivCard | ![]() | 0x09C3 | 0x0008 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | The reader do timeout when a special USB frame is sent from the reader. If the frame size if a multiple of wMaxPacketSize the communication is stopped. Some users report that this reader is in fact a SCR-331 with a different firmware and that you can upgrade its firmware to transform it into a (supported) SCR-331 reader. | 1.0.0 | ||
| 29 | Activkey Sim | supported | ActivIdentity | ![]() | 0x09C3 | 0x0014 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.1.0 | |||
| 30 | Argos Mini II | shouldwork | Todos | ![]() | 0x0B0C | 0x0050 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | Use at least firmware 1.01. The previous one is bogus. | 1.3.12 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 31 | Auriga | shouldwork | COVADIS | ![]() | 0x0982 | 0x0040 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 10.01 | 0x02 | 0x07 | 0x0000 0x0003 | 2.000 MHz | 2.000 MHz | 5376 bps | 21504 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 2 | biometric, 3 slots | No extended APDU | 1.3.12 | |
| 32 | BLUDRIVE II CCID | shouldwork | BLUTRONICS | ![]() | 0x1B0E | 0x1078 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x00010130 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.3 | |||
| 33 | CCID SmartCard Controller | shouldwork | Winbond | ![]() | 0x0416 | 0x3815 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 3.000 MHz | 3.000 MHz | 8065 bps | 32258 bps | 123 | 0x00000000 | 0x00000000 | 0x000004B2 | 138 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.1 | |||
| 34 | CI692 | shouldwork | Dectel | ![]() | 0x0BDA | 0x0165 | Smart Card Reader Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 35 | CKey4 | shouldwork | Bit4id | ![]() | 0x25DD | 0x2321 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 36 | CL1356A_HID | shouldwork | id3 Semiconductors | ![]() | 0x0B81 | 0x0220 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.7 | ||
| 37 | CL1356T | supported | id3 Semiconductors | ![]() | 0x0B81 | 0x0200 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 38 | CL1356T5 | shouldwork | id3 Semiconductors | ![]() | 0x0B81 | 0x0200 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 39 | CPL108 | shouldwork | ASK-RFID | ![]() | 0x1FD3 | 0xCC1D | Contactless | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x000400FE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | 1.3.12 | ||
| 40 | CSB6 Basic | shouldwork | SpringCard | ![]() | 0x1C34 | 0x7121 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.3.9 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 41 | CSB6 Secure | shouldwork | SpringCard | ![]() | 0x1C34 | 0x7123 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x02 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 3 slots | No extended APDU | 1.3.9 | |
| 42 | CSB6 Ultimate | shouldwork | SpringCard | ![]() | 0x1C34 | 0x7124 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x04 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 5 slots | No extended APDU | 1.3.9 | |
| 43 | CX00 | shouldwork | Todos | ![]() | 0x0B0C | 0x0052 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x00 | 1 | No extended APDU | 1.4.0 | ||
| 44 | Card Reader | supported | Eutron | ![]() | 0x073D | 0x0C00 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The device contains a hub with 3 devices: 2 CCID card readers and a USB Mass storage | 1.4.2 | ||
| 45 | CardMan 1021 | shouldwork | OMNIKEY | ![]() | 0x076B | 0x1021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.692 MHz | 3.692 MHz | 9924 bps | 317591 bps | 254 | 0x00000007 | 0x00000000 | 0x000103B1 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 46 | CardMan 3021 | shouldwork | OMNIKEY AG | ![]() | 0x076B | 0x3021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.1.0 | ||
| 47 | CardMan 3121 | supported | OMNIKEY AG | ![]() | 0x076B | 0x3021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.000 MHz | 12.000 MHz | 8065 bps | 96774 bps | 254 | 0x00000007 | 0x00000000 | 0x000205B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 0.1.0 | ||
| 48 | CardMan 3621 | shouldwork | OMNIKEY AG | ![]() | 0x076B | 0x3621 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | Does not support minimum PIN length (wPINMaxExtraDigit) lower than 5 | 1.0.1 |
| 49 | CardMan 3821 | shouldwork | OMNIKEY AG | ![]() | 0x076B | 0x3821 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | Does not support minimum PIN length (wPINMaxExtraDigit) lower than 5 | 1.0.0 |
| 50 | CardMan 4321 | shouldwork | OMNIKEY | ![]() | 0x076B | 0x4321 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ExpressCard | No extended APDU | The reader may report a card present if no card is inserted. See https://bugzilla.redhat.com/show_bug.cgi?id=531998 | 1.3.0 |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 51 | CardMan 5121 | shouldwork | OMNIKEY AG | ![]() | 0x076B | 0x5121 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The RFID interface is not supported. | 1.2.0 |
| 52 | CardMan 5125 | shouldwork | OMNIKEY AG | ![]() | 0x076B | 0x5125 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The HID PROX interface is not supported. | 1.0.0 |
| 53 | CardMan 5321 | shouldwork | OMNIKEY | ![]() | 0x076B | 0x5321 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The RFID interface is not supported. | 1.3.1 |
| 54 | CardMan 6121 | shouldwork | OMNIKEY AG | ![]() | 0x076B | 0x6622 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.0.0 | ||
| 55 | CrazyWriter | shouldwork | SpringCard | ![]() | 0x1C34 | 0x7113 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x02 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 3 slots | No extended APDU | 1.3.9 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 56 | Crypto Stick v1.2 | shouldwork | German Privacy Foundation | ![]() | 0x20A0 | 0x4107 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0002 | 3.600 MHz | 3.600 MHz | 9677 bps | 116129 bps | 254 | 0x00000000 | 0x00000000 | 0x000104BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 57 | CryptoIdentity CCID | supported | Eutron | ![]() | 0x073D | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 58 | CryptoIdentity CCID | supported | Eutron | ![]() | 0x073D | 0x0008 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 59 | D2CIM-DVUSB VM/CCID | shouldwork | Raritan | ![]() | 0x14DD | 0x1006 | 18 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010238 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 60 | DIGIPASS 920 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0920 | CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.3 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 61 | DIGIPASS KEY 101 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0101 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 62 | DIGIPASS KEY 200 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0119 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 63 | DIGIPASS KEY 200 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0115 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 64 | DIGIPASS KEY 202 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0120 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 65 | DIGIPASS KEY 202 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0122 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 66 | DIGIPASS KEY 860 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0117 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 67 | DIGIPASS KEY 860 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0112 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 68 | DOMINO-Key TWIN | shouldwork | Secure Device Solutions | ![]() | 0x0B81 | 0x8007 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 12.000 MHz | 12903 bps | 825807 bps | 252 | 0x00000000 | 0x00000000 | 0x00010200 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.5 | ||||
| 69 | DP855 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0855 | 3 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| 70 | DP865 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0865 | 3 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0818 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 71 | DP905 | shouldwork | VASCO | ![]() | 0x1A44 | 0x0001 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.6 | ||
| 72 | Dell Smart Card Reader Keyboard | supported | Dell | ![]() | 0x413C | 0x2101 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | PIN Verification | Seems to support SPE only if the VERIFY command has a fixed length. See http://www.opensc-project.org/pipermail/opensc-devel/2011-May/016726.html | 0.9.0 | |
| 73 | Digipass 860 | supported | Eutron | ![]() | 0x073D | 0x0B00 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 74 | EMV CAP - SecOVID Reader III | supported | KOBIL | ![]() | 0x0D46 | 0x3010 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 2.000 MHz | 4.000 MHz | 10573 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 536 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.1 | ||
| 75 | EZIO CB+ | supported | Gemalto | ![]() | 0x08E6 | 0x34C3 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.4 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 76 | EasyFinger Standard | shouldwork | SpringCard | ![]() | 0x1C34 | 0x7136 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | No extended APDU | 1.3.9 | |
| 77 | EasyFinger Ultimate | shouldwork | SpringCard | ![]() | 0x1C34 | 0x7138 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x03 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 4 slots | No extended APDU | 1.3.9 | |
| 78 | Ezio Shield | supported | Gemalto | ![]() | 0x08E6 | 0x34C0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.4 | ||
| 79 | Ezio Shield | shouldwork | Gemalto | ![]() | 0x08E6 | 0x34C2 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B2 | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.5 | |||
| 80 | Ezio Shield Branch Reader | shouldwork | Gemalto | ![]() | 0x08E6 | 0x34C5 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x000204B2 | 271 bytes | 0x00 | 0x00 | 0x0211 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | SVN | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 81 | FT SCR310 | shouldwork | Feitian Technologies | ![]() | 0x096E | 0x0505 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 600000 bps | 248 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 0 | 1.4.2 | |||
| 82 | Gem e-Seal Pro USB Token | shouldwork | Gemalto | ![]() | 0x08E6 | 0x2202 | 0 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.5 | |||
| 83 | GemCore POS Pro Smart Card Reader | shouldwork | Gemplus | ![]() | 0x08E6 | 0x3479 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x04 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 5 slots | 1.4.4 | |||
| 84 | GemCore SIM Pro Smart Card Reader | supported | Gemalto | ![]() | 0x08E6 | 0x3480 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x01 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 2 slots | 1.0.0 | ||
| 85 | GemPC Express | shouldwork | Gemalto | ![]() | 0x08E6 | 0x34EC | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ExpressCard | 1.0.0 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 86 | Gemplus USB SmartCard Reader 433-Swap | supported | Gemalto | ![]() | 0x08E6 | 0x4433 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0 | 0 | 0x0000 | 0x00 | 1 | No extended APDU | 0.1.0 | ||
| 87 | Gnuk | shouldwork | Free Software Initiative of Japan | ![]() | 0x234B | 0x0000 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 64 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 88 | HP USB CCID Smartcard Keyboard | unsupported | Hewlett-Packard Company | ![]() | 0x03F0 | 0x0036 | HP USB CCID Keyboard Smartcard Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 307200 bps | 252 | 0x00000000 | 0x00000001 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | WARNING: Secure Pin Entry feature is bogus and has been disabled. firmware < 1.24 is bogus. SetParameters fails with a card of ATR 3B 16 96 41 73 74 72 69 64. The smart card reader part is from SCM. | 1.4.1 | |
| 89 | HP USB Smart Card Keyboard | unsupported | Hewlett-Packard Company | ![]() | 0x03F0 | 0x1024 | 4 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | SECURITY ALERT: Martin P. reported that on Mac OS X the pinpad feature does not work correctly and the PIN code is sent to the host (instead of being kept secret by the pinpad) | 1.1.0 | |
| 90 | HP USB Smartcard Reader | supported | SCM Microsystems Inc. | ![]() | 0x03F0 | 0x0824 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 91 | Hybrid Smartcard Reader | shouldwork | Gemalto | ![]() | 0x08E6 | 0x5743 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x02 | 0x0000 0x0001 | 3.686 MHz | 3.686 MHz | 9910 bps | 9910 bps | 0 | 0x00000000 | 0x00000000 | 0x00010070 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 2 slots | 1.3.12 | ||
| 92 | ID-ONE TOKEN SLIM v2 | shouldwork | OBERTHUR TECHNOLOGIES | ![]() | 0x1A74 | 0xB111 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 12.000 MHz | 12903 bps | 825807 bps | 252 | 0x00000000 | 0x00000000 | 0x00010200 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 93 | IDProtect Key v2 | shouldwork | Athena | ![]() | 0x0DC3 | 0x0900 | Main Interface | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 252 | 0x00000000 | 0x00000000 | 0x0001023C | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Be to have a v2 token (bcdDevice: 2.00). The V1 token is bogus: PPS to set the card in T=1 fails. See http://www.opensc-project.org/pipermail/opensc-user/2010-May/004023.html | 1.3.12 | ||
| 94 | Integrated Smart Card Reader | supported | Lenovo | ![]() | 0x17EF | 0x1003 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 95 | JCOP41V221 | shouldwork | Philips Semiconductors | ![]() | 0x0471 | 0x040F | 0 | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 96 | KAAN Advanced | supported | KOBIL | ![]() | 0x0D46 | 0x3002 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 432 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Firmware older than 0.37 is bogus | 0.9.3 | |
| 97 | KAAN Base | supported | KOBIL | ![]() | 0x0D46 | 0x3001 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 432 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Firwmare older than 0.37 is bogus | 0.9.3 | ||
| 98 | KAAN SIM III | supported | KOBIL | ![]() | 0x0D46 | 0x3003 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 0.9.3 | ||
| 99 | KBR36 | shouldwork | C3PO | ![]() | 0x0783 | 0x0009 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.2.0 | ||
| 100 | KONA USB SmartCard | shouldwork | KEBTechnology | ![]() | 0x04CC | 0x5072 | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00000840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.6 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 101 | LTC31 v2 | supported | C3PO | ![]() | 0x0783 | 0x0006 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | New model with USB product ID 0x0006 | 1.1.0 | ||
| 102 | LTC32 | shouldwork | C3PO | ![]() | 0x0783 | 0x0010 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.2.0 | ||
| 103 | LTC36 | shouldwork | C3PO | ![]() | 0x0783 | 0x0036 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 104 | LTC3x USB | unsupported | C3PO | ![]() | 0x0783 | 0x0003 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00010002 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The reader works fine with Linux kernel 2.4 but does not with Linux kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument). This reader is not more sold and replaced by the LTC31v2 model. | 0.1.0 | ||
| 105 | Leo v2 | supported | XIRING | ![]() | 0x0F14 | 0x0038 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.1 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 106 | MFP Smart Card Reader | shouldwork | Hewlett Packard | ![]() | 0x03F0 | 0x2924 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.9 | |||
| 107 | Micro Oz776 | unsupported | O2 | ![]() | 0x0B97 | 0x7762 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops like the Dell D420 or D820. The ATR may be corrupted by a 90 00 at the end The reader is bogus and does not accept PPS | 0.9.3 | ||
| 108 | Micro Oz776 | unsupported | O2 | ![]() | 0x0B97 | 0x7772 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops. The reader is bogus and does not accept PPS | 1.3.1 | ||
| 109 | Multi-Reader | shouldwork | Kingtrust | ![]() | 0x0483 | 0x0007 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 110 | MyLeo | supported | XIRING | ![]() | 0x0F14 | 0x0037 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 522 bytes | 0xFF | 0xFF | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.4.2 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 111 | MySMART PAD V2.0 | supported | MYSMART | ![]() | 0x09BE | 0x0002 | 0 | 3 | 0xFF | 1.00 | 0x00 | 0x00 | 0x0000 0x0300 | 1024.000 MHz | 1024.000 MHz | 10752 bps | 129032 bps | 0 | 0x00000000 | 0x03000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 112 | NFC CCID eNetPad | shouldwork | Macally | ![]() | 0x08AE | 0x0BDF | Macally CCID READER | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0002 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 256 | 0x00000000 | 0x00000000 | 0x00020040 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| 113 | PC Twin Reader | supported | Gemalto | ![]() | 0x08E6 | 0x3437 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | serial | 0.1.0 | ||
| 114 | PDT | supported | Gemalto | ![]() | 0x08E6 | 0x1227 | ICCD | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.9 | |
| 115 | PIV Token | shouldwork | GoldKey Security | ![]() | 0x19C8 | 0x0012 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020870 | 2048 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 116 | PR533 | shouldwork | NXP | ![]() | 0x1FC9 | 0x010B | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.685 MHz | 13.560 MHz | 9909 bps | 216960000 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 273 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | SVN | |||
| 117 | Panasonic USB Smart Card Reader 7A-Smart | shouldwork | Panasonic | ![]() | 0x04DA | 0x117A | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 118 | Precise 200 MC | unsupported | Precise Biometrics | ![]() | 0x08C3 | 0x0402 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 7.500 MHz | 10753 bps | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 65550 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html | 1.3.10 | |
| 119 | Precise 250 MC | unsupported | Precise Biometrics | ![]() | 0x08C3 | 0x0401 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 7.500 MHz | 10753 bps | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 65550 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | biometric | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html | 1.3.6 | |
| 120 | Prox Dual USB PC LinkReader | supported | Gemalto | ![]() | 0x08E6 | 0x5503 | Prox-DU Contact interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader, contactless | 1.4.2 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 121 | Prox Dual USB PC LinkReader | supported | Gemalto | ![]() | 0x08E6 | 0x5503 | Prox-DU Contactless interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 278 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader, contactless | No extended APDU | 1.4.2 | |
| 122 | Prox SU USB PC LinkReader | supported | Gemalto | ![]() | 0x08E6 | 0x5504 | Prox-SU Contact interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Multi interface reader, contactless | 1.4.2 | ||
| 123 | Prox SU USB PC LinkReader | supported | Gemalto | ![]() | 0x08E6 | 0x5504 | Prox-SU Contactless interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 278 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Second interface, Multi interface reader, contactless | No extended APDU | 1.4.2 | |
| 124 | Prox'N'Roll | shouldwork | SpringCard | ![]() | 0x1C34 | 0x7141 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | 1.3.9 | |
| 125 | RSA SecurID (R) Authenticator | unsupported | RSA | ![]() | 0x15E1 | 0x2007 | MSD | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x02 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 125000 bps | 254 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | the new firmware (revision 6284) fails to respond to initial CmdGetSlotStatus() with "ccid_usb.c:687:ReadUSB() read failed (5/2): -8 Success" or with "<- 000000 81 FB FF FF FF" "commands.c:1046:CmdGetSlotStatus() Not enough data received: 5 bytes" | 0.9.4 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 126 | Reflex USB v3 | shouldwork | Axalto | ![]() | 0x04E6 | 0x511C | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.1 | |||
| 127 | Rutoken ECP | shouldwork | Aktiv | ![]() | 0x0A89 | 0x0030 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.11 | |
| 128 | Rutoken Magistra | shouldwork | Aktiv Co., ProgramPark | ![]() | 0x0A89 | 0x0060 | 0 | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| 129 | Rutoken lite | shouldwork | Aktiv | ![]() | 0x0A89 | 0x0025 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.4.2 | |
| 130 | SA .NET Dual | shouldwork | Gemalto | ![]() | 0x08E6 | 0x4042 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 1.500 MHz | 1.500 MHz | 4032 bps | 23437 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.5 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 131 | SBV280 | disabled | SMART | ![]() | 0x0B8C | 0x000E | CCID 1.1 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | Removed on manufacturer request. They use libusb directly in their own driver. | 1.3.12 |
| 132 | SC Reader 371 | shouldwork | Avtor | ![]() | 0x15CF | 0x001D | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 10.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.571 MHz | 3.571 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | |||
| 133 | SCL010 Contactless Reader | disabled | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5291 | 4 | 3 | 0xFF | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 13.560 MHz | 13.560 MHz | 106000 bps | 848000 bps | 254 | 0x00000000 | 0x00000001 | 0x0001007E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | The contactless interface is not supported. | 1.3.11 | |
| 134 | SCL01x Contactless Reader | shouldwork | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5293 | SCL01x Contactless Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000001 | 0x000404BE | 262 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | You have to upgrade the firmware using version 1.12 or later | 1.4.3 | |
| 135 | SCL01x Contactless Reader | disabled | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5292 | SCL01x Contactless Reader | 3 | 0xFF | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 13.560 MHz | 13.560 MHz | 106000 bps | 848000 bps | 254 | 0x00000000 | 0x00000001 | 0x0001007E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | The contactless interface is not supported. | 1.3.12 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 136 | SCR 331 | supported | SCM Microsystems Inc. | ![]() | 0x04E6 | 0xE001 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. | 0.1.0 | ||
| 137 | SCR 331-DI | supported | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5111 | 4 | 3 | 0xFF | 1.00 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | You have to upgrade the firmware using version 5.18 or later. The contactless interface is not supported. | 0.4.0 | |
| 138 | SCR 3310 | supported | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5116 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 0.9.3 | |||
| 139 | SCR 3311 | supported | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x511D | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 140 | SCR 335 | shouldwork | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5115 | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. Or use a v2.0 model. | 0.1.0 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 141 | SCR 355 | supported | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5410 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 142 | SCR001 | shouldwork | Alcor Micro | ![]() | 0x058F | 0x9520 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.11 | ||
| 143 | SCR301 | unsupported | Feitian | ![]() | 0x096E | 0x0503 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 240 | 0x00000000 | 0x00000000 | 0x000102B8 | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | The reader fails with a CASE 2 APDU with Le=0 (256 bytes) Sent: 80 34 01 00 00 ifdhandler.c:1219:IFDHTransmitToICC() no name (lun: 0) commands.c:1542:CmdXfrBlockTPDU_T0() T=0: 5 bytes -> 000000 6F 05 00 00 00 00 07 00 00 00 80 34 01 00 00 <- 000000 80 00 00 00 00 00 07 40 FE 00 commands.c:1316:CCID_Receive Card absent or mute And time extension requests are not forwarded back to the host. A new version of the reader is available and may fix this issue. | 1.3.11 | ||
| 144 | SCR331-DI USB Smart Card Reader | shouldwork | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5120 | 4 | 3 | 0xFF | 1.00 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 255 | 255 | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 0.9.4 | |
| 145 | SCR3310 USB Smart Card Reader | shouldwork | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x511F | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 146 | SCR3320 - Smart Card Reader | shouldwork | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5117 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 147 | SCR3340 - ExpressCard54 Smart Card Reader | shouldwork | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5119 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ExpressCard | 1.0.0 | ||
| 148 | SCR33x USB Smart Card Reader | shouldwork | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5113 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 149 | SCR35xx v2.0 USB SC Reader | shouldwork | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5410 | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 150 | SDI010 Smart Card Reader | shouldwork | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x5121 | 4 | 3 | 0xFF | 1.10 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 1.0.1 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 151 | SDI011 Contactless Reader | shouldwork | SCM Microsystems Inc. | ![]() | 0x04E6 | 0x512B | Vendor Interface | 3 | 0xFF | 1.10 | 0x01 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless, 2 slots | The contactless interface is not supported. | 1.4.6 | |
| 152 | SIM Reader | supported | Eutron | ![]() | 0x073D | 0x0C00 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The device contains a hub with 3 devices: 2 CCID card readers and a USB Mass storage | 1.4.2 | ||
| 153 | SPR 532 | supported | SCM Microsystems Inc. | ![]() | 0x04E6 | 0xE003 | 4 | 3 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 254 | 0x00000000 | 0x00000000 | 0x000100BA | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | You have to upgrade the firmware using version 5.10 or later. | 0.3.2 | |
| 154 | STD200 | shouldwork | SYNNIX | ![]() | 0x1206 | 0x2105 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 155 | SchlumbergerSema Cyberflex Access | shouldwork | SchlumbergerSema | ![]() | 0x0973 | 0x0003 | 0 | 0 | 0xFF | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00000840 | 256 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.0 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 156 | Secure Storage Token | supported | Verisign | ![]() | 0x08E6 | 0x1359 | 0 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 157 | Secure Token | supported | Verisign | ![]() | 0x08E6 | 0xACE0 | 0 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0 | 0 | 0x0000 | 0x00 | 1 | 0.9.4 | |||
| 158 | SecureToken | shouldwork | Avtor | ![]() | 0x15CF | 0x0019 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 10.01 | 0x00 | 0x01 | 0x0000 0x0003 | 3.571 MHz | 3.571 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.6 | ||
| 159 | Sense MC | supported | Precise Biometrics | ![]() | 0x076B | 0xA022 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | biometric | No extended APDU | 1.4.5 | |
| 160 | Sitecom USB simcard reader MD-010 | shouldwork | Sitecom | ![]() | 0x0DF6 | 0x800A | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.0 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 161 | Smart Card Reader | shouldwork | OMNIKEY AG | ![]() | 0x076B | 0xA021 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 3.692 MHz | 3.692 MHz | 9924 bps | 119096 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.10 | ||
| 162 | Smart Card Reader | shouldwork | Tianyu | ![]() | 0xA625 | 0x0810 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.0 | |||
| 163 | Smart Enterprise Guardian Secure USB Device | supported | Gemalto | ![]() | 0x08E6 | 0x8000 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 7.500 MHz | 20112 bps | 223200 bps | 252 | 0x00000000 | 0x00000000 | 0x0001007A | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.2 | |||
| 164 | Smart Enterprise Guardian Secure USB Device | shouldwork | Gemalto | ![]() | 0x08E6 | 0x8108 | Smart Card Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 2.000 MHz | 4.000 MHz | 5376 bps | 250000 bps | 252 | 0x00000000 | 0x00000000 | 0x0001007A | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| 165 | Smart Pocket | supported | Eutron | ![]() | 0x073D | 0x0C01 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 166 | Smart Token | shouldwork | KOBIL Systems | ![]() | 0x0D46 | 0x3014 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 12903 bps | 412896 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 586 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 167 | SmartBoard XX1X | shouldwork | Cherry GmbH | ![]() | 0x046A | 0x005B | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.5 | |
| 168 | SmartBoard XX33 | supported | Cherry GmbH | ![]() | 0x046A | 0x0005 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0 | 0 | 0x0000 | 0x01 | 1 | PIN Verification | No extended APDU | 0.9.0 | |
| 169 | SmartBoard XX44 | supported | Cherry GmbH | ![]() | 0x046A | 0x0010 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 0.9.3 | |
| 170 | SmartCard Keyboard USB 2A | shouldwork | Fujitsu Siemens Computers | ![]() | 0x0BF8 | 0x1005 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.0 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 171 | SmartCard USB 2A | shouldwork | Fujitsu Siemens Computers | ![]() | 0x0BF8 | 0x1006 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.0 | |
| 172 | SmartCase KB SCR eSIG | shouldwork | FujitsuTechnologySolutions GmbH | ![]() | 0x0BF8 | 0x1017 | SmartCase Smartcard Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 307200 bps | 252 | 0x00000000 | 0x00000001 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.4.6 | ||
| 173 | SmartMX Sample | shouldwork | Philips Semiconductors | ![]() | 0x04B9 | 0x1400 | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | used in some SafeNet iKey 4000 | 1.3.10 |
| 174 | SmartTerminal ST-1275 | shouldwork | Cherry GmbH | ![]() | 0x046A | 0x0072 | Smart Card Reader CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | contactless | No extended APDU | The contactless interface is not supported. | 1.3.12 |
| 175 | SmartTerminal ST-2xxx | supported | Cherry GmbH | ![]() | 0x046A | 0x003E | 4 | 3 | 0xFF | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 0.9.4 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 176 | SmartTerminal XX1X | shouldwork | Cherry GmbH | ![]() | 0x046A | 0x0070 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.3.9 | ||
| 177 | SmartTerminal XX44 | supported | Cherry GmbH | ![]() | 0x046A | 0x002D | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 0.9.4 | ||
| 178 | Star Sign Card Token 350 (ICCD) | shouldwork | Giesecke & Devrient GmbH | ![]() | 0x1059 | 0x000C | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 280 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| 179 | Star Sign Card Token 550 (ICCD) | shouldwork | Giesecke & Devrient GmbH | ![]() | 0x1059 | 0x000D | 0 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.1 | |
| 180 | StarReader SMART | shouldwork | MSI | ![]() | 0x0BDA | 0x0161 | Smart Card Reader Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | You may need to unload/blacklist the mceusb Linux kernel driver to use the device. | 1.3.10 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 181 | StarSign Crypto USB Token | supported | Giesecke & Devrient GmbH | ![]() | 0x1059 | 0x0017 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000404BE | 272 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.6 | |||
| 182 | TLTC2USB | shouldwork | C3PO | ![]() | 0x0783 | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0003 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000001 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.2.0 | |||
| 183 | TSC12xxFV.09 | shouldwork | Teridian Semiconductors | ![]() | 0x1862 | 0x0000 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x04 | 0x03 | 0x0000 0x0003 | 3.600 MHz | 8.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000000 | 0x00000000 | 0x000405F2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 5 | 5 slots | 1.4.6 | ||
| 184 | Teo | supported | XIRING | ![]() | 0x076B | 0xA022 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | 1.2.0 | ||
| 185 | TianYu CCID SmartKey | supported | TianYu CCID Key | ![]() | 0xA625 | 0x0801 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 115200 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 512 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.10 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 186 | TokenA sl vt | shouldwork | Validy | ![]() | 0x1CF0 | 0x0001 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0003 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 1024 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.6 | |||
| 187 | USB GemPCPinpad SmartCard Reader | supported | Gemalto | ![]() | 0x08E6 | 0x3478 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Known problems/limitations: Does not support minimum PIN length (wPINMaxExtraDigit) lower than 4 Does not support maximum PIN length (wPINMaxExtraDigit) greater than 8 Does send a VERIFY PIN command with an empty PIN to get the number of remaining trials. This may be problematic with some smart cards like the Belgian eID card that does not support this and will decrement the counter | 1.0.0 | |
| 188 | USB GemPCPinpad SmartCard Reader | shouldwork | Gemalto | ![]() | 0x08E6 | 0x3478 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.13 | ||
| 189 | USB Reader V3 | supported | ActivIdentity | ![]() | 0x09C3 | 0x0013 | CCID Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 8.000 MHz | 12903 bps | 412903 bps | 252 | 0x00000000 | 0x00000000 | 0x000101BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.0.0 | |||
| 190 | USB Shell Token V2 | supported | Gemalto | ![]() | 0x08E6 | 0x3438 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 0.1.0 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 191 | USB Smart Card Reader | disabled | THRC | ![]() | 0x062D | 0x0001 | SCR Interface | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | also known as ID-SMID01, SCT018 and maybe other commercial names PPS fails with a Cryptoflex card Powerup fails with a Setcos card | 1.1.0 | ||
| 192 | USB Smart Chip Device | shouldwork | OCS ID-One Cosmo Card | ![]() | 0x1A74 | 0x6354 | 4 | 0 | 0xFF | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.8 | |
| 193 | USB Smart Chip Device | disabled | OCS ID-One Cosmo Card | ![]() | 0x1A74 | 0x6356 | 4 | 0 | 0xFF | 2.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | The reader responds with bResponseType not defined in ICCD v1.0 specification. See http://archives.neohapsis.com/archives/dev/muscle/2009-q4/0059.html | 1.3.12 |
| 194 | USB-Token iBank2key | shouldwork | BIFIT | ![]() | 0x23A0 | 0x0001 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0002 | 5.000 MHz | 5.000 MHz | 13440 bps | 430107 bps | 254 | 0x00000000 | 0x00000000 | 0x000205B8 | 272 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | No extended APDU | 1.4.5 | ||
| 195 | USB2.0-CRW | shouldwork | Generic | ![]() | 0x0BDA | 0x0169 | 6 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 196 | VEGA-ALPHA | shouldwork | COVADIS | ![]() | 0x0982 | 0x0008 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.6 | ||
| 197 | VaultIC 460 Smart Object | shouldwork | Inside Secure | ![]() | 0x2406 | 0x6302 | ICCD 1.00 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.4.6 | |
| 198 | VaultIC420 Smart Object | shouldwork | ATMEL | ![]() | 0x03EB | 0x6012 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 199 | VaultIC440 | shouldwork | ATMEL | ![]() | 0x03EB | 0x6014 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| 200 | VaultIC460 | shouldwork | ATMEL | ![]() | 0x03EB | 0x6016 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | No extended APDU | 1.3.12 | |
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 201 | Virtual USB CCID | shouldwork | VMware | ![]() | 0x0E0F | 0x0004 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.800 MHz | 4.800 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x0002004E | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.9 | |
| 202 | Weneo | shouldwork | Neowave | ![]() | 0x1E0D | 0x8033 | 5 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.10 | |||
| 203 | Weneo | shouldwork | Neowave | ![]() | 0x1E0D | 0x0013 | 5 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 204 | Weneo | shouldwork | Neowave | ![]() | 0x1E0D | 0x0033 | Weneo Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.2 | |||
| 205 | Weneo | shouldwork | Neowave | ![]() | 0x1E0D | 0x1023 | Weneo SIM Reader | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x0001023A | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.3 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 206 | XI-SIGN USB V2 | supported | XIRING | ![]() | 0x0F14 | 0x0011 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.600 MHz | 3.600 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x020C | 0x03 | 1 | PIN Verification, PIN Modification | No extended APDU | 1.3.9 | |
| 207 | XI-SIGN USB V2 | shouldwork | XIRING | ![]() | 0x0F14 | 0x0011 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 3.600 MHz | 3.600 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x020C | 0x00 | 1 | No extended APDU | 1.3.9 | ||
| 208 | XecureHSM | shouldwork | Softforum Co., Ltd | ![]() | 0x04E8 | 0x0007 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 0x0000 0x0001 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.11 | |||
| 209 | cryptokey | shouldwork | Bit4id | ![]() | 0x25DD | 0x1201 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 210 | cyberJack RFID basis | shouldwork | REINER SCT | ![]() | 0x0C4B | 0x9102 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 1.000 MHz | 1.000 MHz | 2688 bps | 2688 bps | 254 | 0x00000000 | 0x00000000 | 0x000404B0 | 266 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.4.1 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 211 | cyberJack pinpad(a) | disabled | Reiner-SCT | ![]() | 0x0C4B | 0x0300 | 0 | 3 | 0xFF | 10.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 8.000 MHz | 10072 bps | 250000 bps | 254 | 0x00000007 | 0x00000000 | 0x00010030 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | PIN Verification, PIN Modification | Time requests are not managed and the driver may time out without any response from the reader. This is not a problem unless you use a time-consuming APDU like RSA key generation. Reiner provides a free software driver for this reader: http://support.reiner-sct.de/ | 1.3.1 | |
| 212 | ePass2003 | supported | Feitian | ![]() | 0x096E | 0x0807 | ? | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 2048 | 0x00000000 | 0x00000000 | 0x00040840 | 2100 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.4.3 | ||
| 213 | eSafeLD | shouldwork | CCB | ![]() | 0x8829 | 0xCCB2 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0002 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 1041 | 0x00000000 | 0x00000000 | 0x00040672 | 1041 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | ||||
| 214 | eToken PRO USB 72K Java | unsupported | Aladdin | ![]() | 0x0529 | 0x0620 | 4 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 49 | 0x00000000 | 0x00000000 | 0x0001023C | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The token does not work after a warm reset. See http://www.opensc-project.org/pipermail/opensc-devel/2009-April/012128.html | 1.3.9 | ||
| 215 | iAM | shouldwork | Bit4id | ![]() | 0x25DD | 0x2221 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000100B6 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 216 | iBank2Key | shouldwork | BIFIT | ![]() | 0x23A0 | 0x0002 | iBank2Key | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 64 | 0x00000000 | 0x00000000 | 0x00000840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.4.5 | ||
| 217 | jToken s1 | disabled | jNet Technology inc. | ![]() | 0x0483 | 0x2010 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 0x0000 0x0001 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00010840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ICCD | 1.3.9 | ||
| 218 | keyboard SK-3106 | supported | Dell | ![]() | 0x413C | 0x2100 | ????? | 3 | 0xFF | 1.00 | 0x00 | 0x03 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | PIN Verification | 0.9.0 | ||
| 219 | mIDentity 4smart | shouldwork | KOBIL Systems | ![]() | 0x0D46 | 0x4189 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 220 | mIDentity 4smart AES | shouldwork | KOBIL Systems | ![]() | 0x0D46 | 0x41A9 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 221 | mIDentity M | unsupported | KOBIL Systems | ![]() | 0x0D46 | 0x4000 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | No extended APDU | Time requests are not managed correctly and make the firmware fail. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | 0.9.3 | |
| 222 | mIDentity XL | unsupported | KOBIL Systems | ![]() | 0x0D46 | 0x4001 | 0 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Time requests are not managed correctly and make the firmware fail. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | 1.3.9 | ||
| 223 | mIDentity fullsize | shouldwork | KOBIL Systems | ![]() | 0x0D46 | 0x4389 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 224 | mIDentity fullsize AES | shouldwork | KOBIL Systems | ![]() | 0x0D46 | 0x43A9 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | 1.3.12 | |||
| 225 | mIDentity visual | shouldwork | KOBIL Systems | ![]() | 0x0D46 | 0x4289 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 0x0000 0x0003 | 4.615 MHz | 4.615 MHz | 12407 bps | 397024 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | PIN Verification, PIN Modification | 1.3.12 | ||
| # | iProduct | section | iManufacturer | image | idVendor | idProduct | iInterface | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwProtocols | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | limitations | note | release |
| 226 | miniLector | shouldwork | Bit4id | ![]() | 0x25DD | 0x3111 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 227 | miniLector-s | shouldwork | Bit4id | ![]() | 0x25DD | 0x1101 | bit4CCID | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | SVN | |||
| 228 | plug'n'crypt CCID token | shouldwork | charismathics | ![]() | 0x19E7 | 0x0002 | 0 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.3.1 | |||
| 229 | uKeyCI800-K18 | shouldwork | HDZB | ![]() | 0x1677 | 0x0025 | ? | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 0x0000 0x0003 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | 1.4.1 |
Generated: Tue May 15 20:50:43 2012
Ludovic Rousseau