Readers sorted by 'dwFeatures' field

Click on the column header to sort by that column.

The background color indicates the section of the reader:

supported

should work

unsupported

#	dwFeatures	section	iManufacturer	iProduct	idVendor	idProduct	bNumEndpoints	bInterfaceClass	bcdCCID	bMaxSlotIndex	bVoltageSupport	dwProtocols	dwDefaultClock	dwMaximumClock	dwDataRate	dwMaxDataRate	dwMaxIFSD	dwSynchProtocols	dwMechanical	dwMaxCCIDMessageLength	bClassGetResponse	bClassEnveloppe	wLcdLayout	bPINSupport	bMaxCCIDBusySlots	features	note
1	0x00000030	shouldwork	O2	O2Micro CCID SC Reader	0x0B97	0x7762	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x03	0x0000 0x0003	4.000 MHz	4.000 MHz	9600 bps	307200 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1		This reader is common as an internal reader in laptops like the Dell D420 or D820. The ATR may be corrupted by a 90 00 at the end
2	0x00000030	shouldwork	O2	O2Micro CCID SC Reader	0x0B97	0x7772	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	9600 bps	307200 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1		This reader is common as an internal reader in laptops.
3	0x000004B2	shouldwork	Winbond	CCID SmartCard Controller	0x0416	0x3815	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	3.000 MHz	3.000 MHz	8065 bps	32258 bps	123	0x00000000	0x00000000	138 bytes	0xFF	0xFF	0x0000	0x00	1
4	0x00000840	shouldwork	KEBTechnology	KONA USB SmartCard	0x04CC	0x5072	1	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0001	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	261 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
5	0x00000840	shouldwork	SchlumbergerSema	SchlumbergerSema Cyberflex Access	0x0973	0x0003	0	0xFF	1.10	0x00	0x01	0x0000 0x0001	3.580 MHz	3.580 MHz	9600 bps	9600 bps	0	0x00000000	0x00000000	256 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
6	0x00010002	unsupported	C3PO	LTC3x USB	0x0783	0x0003	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	10752 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1		The reader works fine with Linux kernel 2.4 but does not with Linux kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument). This reader is not more sold and replaced by the LTC31v2 model.
7	0x00010030	shouldwork	ACS	CCID USB Reader	0x072F	0x90CC	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	250000 bps	247	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
8	0x00010030	supported	ACS	ACR38 USB Reader	0x072F	0x90CC	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	129032 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1		Old versions of this reader are bogus: the reader do timeout when a special USB frame is sent from the reader. If the frame size is a multiple of wMaxPacketSize the communication is stopped.
9	0x00010030	shouldwork	ACS	CCID USB Reader	0x072F	0x90CC	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344100 bps	247	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
10	0x00010030	shouldwork	ACS	CCID USB Reader	0x072F	0x90CC	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344100 bps	247	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
11	0x00010030	shouldwork	Generic	USB2.0-CRW	0x0BDA	0x0161	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x07	0x0000 0x0003	3.750 MHz	7.500 MHz	10080 bps	312500 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
12	0x00010030	shouldwork	Neowave	Weneo	0x1E0D	0x8033	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x02	0x0000 0x0003	4.000 MHz	4.000 MHz	9600 bps	115200 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
13	0x00010030	shouldwork	Neowave	Weneo	0x1E0D	0x0013	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x02	0x0000 0x0003	3.570 MHz	3.570 MHz	9600 bps	115200 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
14	0x00010030	unsupported	Reiner-SCT	cyberJack pinpad(a)	0x0C4B	0x0300	3	0xFF	10.00	0x00	0x07	0x0000 0x0003	4.000 MHz	8.000 MHz	10072 bps	250000 bps	254	0x00000007	0x00000000	270 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']	Time requests are not managed and the driver may time out without any response from the reader. This is not a problem unless you use a time-consuming APDU like RSA key generation. Reiner provides a free software driver for this reader: http://support.reiner-sct.de/
15	0x00010030	shouldwork	Generic	USB2.0-CRW	0x0BDA	0x0169	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x07	0x0000 0x0003	3.750 MHz	7.500 MHz	10080 bps	312500 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
16	0x0001007A	supported	Gemalto	Smart Enterprise Guardian Secure USB Device	0x08E6	0x8000	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0001	3.580 MHz	7.500 MHz	20112 bps	223200 bps	252	0x00000000	0x00000000	270 bytes	0xFF	0xFF	0x0000	0x00	1
17	0x0001007E	unsupported	SCM Microsystems Inc.	SCL010 Contactless Reader	0x04E6	0x5291	3	0xFF	1.10	0x00	0x01	0x0000 0x0003	13.560 MHz	13.560 MHz	106000 bps	848000 bps	254	0x00000000	0x00000001	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']
18	0x000100BA	unsupported	ActivCard	ActivCard USB Reader V2	0x09C3	0x0008	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	4.000 MHz	9600 bps	115200 bps	252	0x00000000	0x00000000	263 bytes	0xFF	0xFF	0x0000	0x00	1		The reader do timeout when a special USB frame is sent from the reader. If the frame size if a multiple of wMaxPacketSize the communication is stopped. Some users report that this reader is in fact a SCR-331 with a different firmware and that you can upgrade its firmware to transform it into a (supported) SCR-331 reader.
19	0x000100BA	supported	ActivCard	ActivCard USB Reader V3	0x09C3	0x0013	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	12.000 MHz	9600 bps	307200 bps	252	0x00000000	0x00000000	263 bytes	0xFF	0xFF	0x0000	0x00	1
20	0x000100BA	shouldwork	Axalto	Reflex USB v3	0x04E6	0x511C	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	12.000 MHz	9600 bps	307200 bps	252	0x00000000	0x00000000	263 bytes	0xFF	0xFF	0x0000	0x00	1
21	0x000100BA	shouldwork	C3PO	USB SMART CARD KEYBOARD	0x0783	0x0009	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	20.000 MHz	9600 bps	230400 bps	254	0x00000007	0x00000000	271 bytes	0x00	0x00	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
22	0x000100BA	shouldwork	C3PO	USB SMART CARD READER	0x0783	0x0010	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	20.000 MHz	9600 bps	230400 bps	254	0x00000007	0x00000000	271 bytes	0x00	0x00	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
23	0x000100BA	shouldwork	C3PO	USB SMART CARD KEYBOARD	0x0783	0x0007	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	20.000 MHz	9600 bps	230400 bps	254	0x00000001	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
24	0x000100BA	supported	Cherry GmbH	SmartTerminal ST-2xxx	0x046A	0x003E	3	0xFF	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	263 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
25	0x000100BA	shouldwork	Hewlett-Packard Company	HP USB Smart Card Keyboard	0x03F0	0x1024	2	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	263 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
26	0x000100BA	supported	SCM Microsystems Inc.	HP USB Smartcard Reader	0x03F0	0x0824	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	12.000 MHz	9600 bps	307200 bps	252	0x00000000	0x00000000	263 bytes	0xFF	0xFF	0x0000	0x00	1
27	0x000100BA	shouldwork	Hewlett Packard	MFP Smart Card Reader	0x03F0	0x2924	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
28	0x000100BA	supported	C3PO	USB SMART CARD READER	0x0783	0x0006	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	20.000 MHz	9600 bps	230400 bps	254	0x00000001	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1		New model with USB product ID 0x0006
29	0x000100BA	shouldwork	SCM Microsystems Inc.	SCR331-DI USB Smart Card Reader	0x04E6	0x5120	3	0xFF	1.00	0x01	0x01	0x0000 0x0003	4.000 MHz	12.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	263 bytes	255	255	0x0000	0x00	1	['contactless']	The contactless interface is not supported.
30	0x000100BA	supported	SCM Microsystems Inc.	SCR331-DI USB Smart Card Reader	0x04E6	0x5111	3	0xFF	1.00	0x01	0x01	0x0000 0x0003	4.000 MHz	12.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	263 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']	You have to upgrade the firmware using version 5.18 or later. The contactless interface is not supported.
31	0x000100BA	supported	SCM Microsystems Inc.	SCRx31 USB Smart Card Reader	0x04E6	0xE001	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1		You have to upgrade the firmware using version 5.18 or later.
32	0x000100BA	supported	SCM Microsystems Inc.	SCR3310 USB Smart Card Reader	0x04E6	0x5116	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
33	0x000100BA	supported	SCM Microsystems Inc.	SCR3311 USB Smart Card Reader	0x04E6	0x511D	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
34	0x000100BA	shouldwork	SCM Microsystems Inc.	SCR3320 - Smart Card Reader	0x04E6	0x5117	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
35	0x000100BA	shouldwork	SCM Microsystems Inc.	SCR33x USB Smart Card Reader	0x04E6	0x5113	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
36	0x000100BA	shouldwork	SCM Microsystems Inc.	SCR3340 - ExpressCard54 Smart Card Reader	0x04E6	0x5119	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['ExpressCard']
37	0x000100BA	supported	SCM Microsystems Inc.	SCR33x USB Smart Card Reader	0x04E6	0x5115	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1		You have to upgrade the firmware using version 5.18 or later.
38	0x000100BA	supported	SCM Microsystems Inc.	SCR35xx USB Smart Card Reader	0x04E6	0x5410	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	263 bytes	0xFF	0xFF	0x0000	0x00	1
39	0x000100BA	shouldwork	SCM Microsystems Inc.	SDI010 Smart Card Reader	0x04E6	0x5121	3	0xFF	1.10	0x01	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	252	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']	The contactless interface is not supported.
40	0x000100BA	supported	SCM Microsystems Inc.	SPRx32 USB Smart Card Reader	0x04E6	0xE003	3	0xFF	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	8.000 MHz	10753 bps	344105 bps	254	0x00000000	0x00000000	270 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']	You have to upgrade the firmware using version 5.10 or later.
41	0x00010130	supported	BLUTRONICS	BLUDRIVE II CCID	0x1B0E	0x1078	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	3.580 MHz	3.580 MHz	9600 bps	115200 bps	252	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
42	0x00010138	shouldwork	SYNNIX	STD200	0x1206	0x2105	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	129032 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
43	0x00010138	unsupported	THRC	USB Smart Card Reader	0x062D	0x0001	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	129032 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1		also known as ID-SMID01 and maybe other commercial names PPS fails with a Cryptoflex card Powerup fails with a Setcos card
44	0x00010230	supported	ActivIdentity	Activkey Sim	0x09C3	0x0014	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	4.800 MHz	12903 bps	412903 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
45	0x00010230	supported	COVADIS	ALYA	0x0982	0x0007	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
46	0x00010230	shouldwork	charismathics	plug'n'crypt CCID token	0x19E7	0x0002	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
47	0x00010230	supported	Dell	Dell Smart Card Reader Keyboard	0x413C	0x2101	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x01	1	['PIN Verification']
48	0x00010230	supported	Dell	Dell USB Smartcard Keyboard	0x413C	0x2100	3	0xFF	1.00	0x00	0x03	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	129032 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x01	1	['PIN Verification']
49	0x00010230	supported	Eutron	CryptoIdentity CCID	0x073D	0x0008	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
50	0x00010230	supported	Eutron	Digipass 860	0x073D	0x0B00	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
51	0x00010230	supported	Eutron	Card Reader	0x073D	0x0C01	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
52	0x00010230	shouldwork	Feitian	CCID Smart Card 301	0x096E	0x0503	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x03	0x0000 0x0003	4.000 MHz	8.000 MHz	10752 bps	600000 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
53	0x00010230	supported	Gemalto	GemCore SIM Pro Smart Card Reader	0x08E6	0x3480	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x01	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	500000 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
54	0x00010230	supported	Gemalto	USB Shell Token V2	0x08E6	0x3438	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
55	0x00010230	supported	Gemalto	USB GemPCPinpad SmartCard Reader	0x08E6	0x3478	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	500000 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x03	1	['PIN Verification', 'PIN Modification']	Known problems/limitations: Does not support minimum PIN length (wPINMaxExtraDigit) lower than 4 Does not support maximum PIN length (wPINMaxExtraDigit) greater than 8 Does send a VERIFY PIN command with an empty PIN to get the number of remaining trials. This may be problematic with some smart cards like the Belgian eID card that does not support this and will decrement the counter
56	0x00010230	supported	Gemalto	PC Twin Reader	0x08E6	0x3437	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
57	0x00010230	supported	Gemalto	PC Twin Reader (serial)	0x08E6	0x3437	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1	['serial']
58	0x00010230	shouldwork	Gemalto	USB GemPC Express	0x08E6	0x34EC	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1	['ExpressCard']
59	0x00010230	shouldwork	Gemalto	Prox Dual USB PC LinkReader	0x08E6	0x5503	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	500000 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
60	0x00010230	shouldwork	Gemalto	Prox SU USB PC LinkReader	0x08E6	0x5504	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	500000 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
61	0x00010230	shouldwork	Gemalto	Gem e-Seal Pro USB Token	0x08E6	0x2202	2	0xFF	1.00	0x00	0x01	0x0000 0x0003	1.500 MHz	1.500 MHz	4032 bps	46875 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
62	0x00010230	supported	Lenovo	Integrated Smart Card Reader	0x17EF	0x1003	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	500000 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
63	0x00010230	supported	MYSMART	MySMART PAD V2.0	0x09BE	0x0002	3	0xFF	1.00	0x00	0x00	0x0000 0x0300	1024.000 MHz	1024.000 MHz	10752 bps	129032 bps	0	0x00000000	0x03000000	271 bytes	0x00	0x00	0x0000	0x00	1
64	0x00010230	shouldwork	Panasonic	Panasonic USB Smart Card Reader 7A-Smart	0x04DA	0x117A	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
65	0x00010230	shouldwork	Softforum Co., Ltd	XecureHSM	0x04E8	0x0007	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x03	0x0000 0x0001	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
66	0x00010230	shouldwork	COVADIS	VEGA-ALPHA	0x0982	0x0008	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	500000 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
67	0x00010230	supported	Verisign	Token GEM USB COMBI-M	0x08E6	0x1359	2	0xFF	1.00	0x00	0x01	0x0000 0x0003	1.500 MHz	1.500 MHz	4032 bps	46875 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
68	0x00010230	supported	Verisign	Token GEM USB COMBI	0x08E6	0xACE0	2	0xFF	1.00	0x00	0x01	0x0000 0x0003	1.500 MHz	1.500 MHz	4032 bps	46875 bps	254	0x00000000	0x00000000	271 bytes	0	0	0x0000	0x00	1
69	0x00010238	shouldwork	Raritan	D2CIM-DVUSB VM/CCID	0x14DD	0x1006	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
70	0x00010238	supported	RSA	RSA SecurID (R) Authenticator	0x15E1	0x2007	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x02	0x0000 0x0001	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
71	0x0001023C	unsupported	Aladdin	Token JC	0x0529	0x0620	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	10752 bps	49	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1		The token does not work after a warm reset. See http://www.opensc-project.org/pipermail/opensc-devel/2009-April/012128.html
72	0x000102BA	unsupported	Broadcom Corp	5880	0x0A5C	0x5800	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	9600 bps	250000 bps	247	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1		found in Dell E6500 laptop No communication to the device ("Resource temporarily unavailable" error) The reader reports "Hardware error" to GetSlotStatus when no card is present.
73	0x00010330	supported	Athena	ASEDrive CCID	0x0DC3	0x1102	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	333333 bps	252	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x03	1	['PIN Verification', 'PIN Modification']	Firmware older than 6.07 is bogus
74	0x00010330	supported	Athena	ASEDrive CCID	0x0DC3	0x1004	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	333333 bps	252	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
75	0x00010330	supported	Eutron	CryptoIdentity CCID	0x073D	0x0007	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344068 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
76	0x00010330	supported	Eutron	SIM Reader	0x073D	0x0C00	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344068 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
77	0x000103B1	shouldwork	OMNIKEY	CardMan 1021	0x076B	0x1021	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	3.692 MHz	3.692 MHz	9924 bps	317591 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
78	0x00010840	supported	jNet Technology inc.	jToken s1	0x0483	0x2010	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0001	3.580 MHz	3.580 MHz	9600 bps	9600 bps	0	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
79	0x00020040	unsupported	ACS	ACR122U PICC Interface	0x072F	0x2200	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0002	4.000 MHz	4.000 MHz	10752 bps	250000 bps	256	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1	['contactless']	Time extension requests are not supported. Firmwares version < 2.06 are bogus: APDU with 0x7B (123) bytes expected do not work with a 14443 card. The reader returns SW=63 00 instead.
80	0x0002004E	shouldwork	VMware	Virtual USB CCID	0x0E0F	0x0004	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x07	0x0000 0x0003	4.800 MHz	4.800 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	512 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
81	0x0002005E	shouldwork	ATMEL	AT91SO CCID Smart Card Reader	0x03EB	0x6004	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x01	0x07	0x0000 0x0003	3.580 MHz	3.580 MHz	9600 bps	9600 bps	256	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0210	0x00	1
82	0x00020472	supported	Cherry GmbH	SmartBoard XX33	0x046A	0x0005	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0	0	0x0000	0x01	1	['PIN Verification']
83	0x00020472	supported	Gemalto	Gemplus USB SmartCard Reader 433-Swap	0x08E6	0x4433	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0	0	0x0000	0x00	1
84	0x0002047E	shouldwork	SpringCard	CSB6 Basic	0x1C34	0x7121	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x03	0x0000 0x0003	3.686 MHz	13.560 MHz	9909 bps	12643980 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']
85	0x0002047E	shouldwork	SpringCard	CSB6 Secure	0x1C34	0x7123	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x02	0x03	0x0000 0x0003	3.686 MHz	13.560 MHz	9909 bps	12643980 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']
86	0x0002047E	shouldwork	SpringCard	CSB6 Ultimate	0x1C34	0x7124	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x04	0x03	0x0000 0x0003	3.686 MHz	13.560 MHz	9909 bps	12643980 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']
87	0x0002047E	shouldwork	SpringCard	CrazyWriter	0x1C34	0x7113	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x02	0x03	0x0000 0x0003	3.686 MHz	13.560 MHz	9909 bps	12643980 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']
88	0x0002047E	shouldwork	SpringCard	EasyFinger Standard	0x1C34	0x7136	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x01	0x03	0x0000 0x0003	3.686 MHz	13.560 MHz	9909 bps	12643980 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']
89	0x0002047E	shouldwork	SpringCard	EasyFinger Ultimate	0x1C34	0x7138	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x03	0x03	0x0000 0x0003	3.686 MHz	13.560 MHz	9909 bps	12643980 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']
90	0x0002047E	shouldwork	SpringCard	Prox'N'Roll	0x1C34	0x7141	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x03	0x0000 0x0003	3.686 MHz	13.560 MHz	9909 bps	12643980 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']
91	0x000204BA	shouldwork	Todos	Argos Mini II	0x0B0C	0x0050	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	344086 bps	254	0x00000000	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1		Use at least firmware 1.01. The previous one is bogus.
92	0x000204BA	supported	XIRING	XI-SIGN USB V2	0x0F14	0x0011	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x07	0x0000 0x0003	3.600 MHz	3.600 MHz	9600 bps	115200 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x020C	0x03	1	['PIN Verification', 'PIN Modification']
93	0x000204BA	shouldwork	XIRING	XI-SIGN USB V2	0x0F14	0x0011	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x07	0x0000 0x0003	3.600 MHz	3.600 MHz	9600 bps	115200 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x020C	0x00	1
94	0x000204BE	supported	Alcor Micro	AU9520	0x058F	0x9520	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x03	0x0000 0x0003	3.700 MHz	3.700 MHz	9946 bps	318280 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1		Firmware 1.01 is bogus. The time request sent by the card is not forwarded by the reader to the host.
95	0x000204BE	shouldwork	Alcor Micro	SCR001	0x058F	0x9520	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x03	0x0000 0x0003	3.700 MHz	3.700 MHz	9946 bps	318280 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
96	0x000204BE	shouldwork	Sitecom	Sitecom USB simcard reader MD-010	0x0DF6	0x800A	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x03	0x0000 0x0003	3.700 MHz	3.700 MHz	9946 bps	318280 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
97	0x000204BE	shouldwork	VASCO	DP905	0x1A44	0x0001	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x03	0x0000 0x0003	3.700 MHz	3.700 MHz	9946 bps	318280 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
98	0x000205B2	supported	OMNIKEY AG	CardMan 3121	0x076B	0x3021	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	3.000 MHz	12.000 MHz	8065 bps	96774 bps	254	0x00000007	0x00000000	271 bytes	0x00	0x00	0x0000	0x00	1
99	0x00020672	shouldwork	Gemalto	Prox Dual USB PC LinkReader	0x08E6	0x5503	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	10752 bps	254	0x00000000	0x00000000	278 bytes	0x00	0x00	0x0000	0x00	1
100	0x00020672	shouldwork	Gemalto	Prox SU USB PC LinkReader	0x08E6	0x5504	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	10752 bps	254	0x00000000	0x00000000	278 bytes	0x00	0x00	0x0000	0x00	1
101	0x000206BA	supported	KOBIL	KAAN SIM III	0x0D46	0x3003	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	4.800 MHz	12903 bps	412903 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
102	0x000206BA	unsupported	KOBIL Systems	mIDentity M	0x0D46	0x4000	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	250000 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1		Time requests are not managed correctly and make the firmware fails. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug.
103	0x000207B2	shouldwork	OMNIKEY AG	CardMan 3021	0x076B	0x3021	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
104	0x000207B2	shouldwork	OMNIKEY AG	CardMan 3621	0x076B	0x3621	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
105	0x000207B2	shouldwork	OMNIKEY AG	CardMan 3821	0x076B	0x3821	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0210	0x03	1	['PIN Verification', 'PIN Modification']
106	0x000207B2	shouldwork	OMNIKEY	CardMan 4321	0x076B	0x4321	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['ExpressCard']
107	0x000207B2	shouldwork	OMNIKEY AG	CardMan 5121	0x076B	0x5121	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']	The RFID interface is not supported.
108	0x000207B2	shouldwork	OMNIKEY AG	CardMan 5125	0x076B	0x5125	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']	The HID PROX interface is not supported.
109	0x000207B2	shouldwork	OMNIKEY	CardMan 5321	0x076B	0x5321	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']	The RFID interface is not supported.
110	0x000207B2	shouldwork	OMNIKEY AG	CardMan 6121	0x076B	0x6622	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
111	0x000207B2	supported	Cherry GmbH	SmartTerminal XX44	0x046A	0x002D	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
112	0x000207B2	shouldwork	Cherry GmbH	SmartBoard XX1X	0x046A	0x005B	3	0x0B [Chip Card Interface Device Class (CCID)]	1.01	0x00	0x07	0x0000 0x0003	4.000 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
113	0x000207B2	shouldwork	Cherry GmbH	SmartTerminal XX1X	0x046A	0x0070	3	0x0B [Chip Card Interface Device Class (CCID)]	1.01	0x00	0x07	0x0000 0x0003	4.000 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
114	0x000207B2	shouldwork	Cherry GmbH	SmartTerminal ST-1275	0x046A	0x0072	3	0x0B [Chip Card Interface Device Class (CCID)]	1.01	0x00	0x07	0x0000 0x0003	4.000 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']	The contactless interface is not supported.
115	0x000207B2	supported	Cherry GmbH	SmartBoard XX44	0x046A	0x0010	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
116	0x000207B2	shouldwork	Fujitsu Siemens Computers	SmartCard Keyboard USB 2A	0x0BF8	0x1005	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
117	0x000207B2	shouldwork	Fujitsu Siemens Computers	SmartCard USB 2A	0x0BF8	0x1006	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']
118	0x000207B2	shouldwork	OMNIKEY AG	Smart Card Reader	0x076B	0xA021	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	3.692 MHz	3.692 MHz	9924 bps	119096 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
119	0x000207B2	supported	XIRING	Teo	0x076B	0xA022	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	8.000 MHz	10752 bps	412903 bps	254	0x00000007	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
120	0x00020840	shouldwork	ATMEL	AT91SC192192CT-USB ICCD reader	0x03EB	0x600B	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0001	3.580 MHz	3.580 MHz	9600 bps	9600 bps	0	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
121	0x00020840	shouldwork	ATMEL	AT98SC032CT-USB	0x03EB	0x6009	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0001	3.580 MHz	3.580 MHz	9600 bps	9600 bps	0	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
122	0x00020840	shouldwork	Aktiv	Rutoken ECP	0x0A89	0x0030	2	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0002	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
123	0x00020840	shouldwork	Aktiv Co., ProgramPark	Rutoken Magistra	0x0A89	0x0060	0	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0002	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	261 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
124	0x00020840	supported	Gemalto	PDT	0x0973	0x1227	0	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0002	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	261 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
125	0x00020840	shouldwork	Giesecke & Devrient GmbH	Star Sign Card Token 350 (ICCD)	0x1059	0x000C	1	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0002	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	280 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
126	0x00020840	shouldwork	Giesecke & Devrient GmbH	Star Sign Card Token 550 (ICCD)	0x1059	0x000D	1	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0002	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	261 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
127	0x00020840	shouldwork	Philips Semiconductors	JCOP41V221	0x0471	0x040F	0	0x0B [Chip Card Interface Device Class (CCID)]	2.00	0x00	0x01	0x0000 0x0002	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	261 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
128	0x00020840	shouldwork	OCS ID-One Cosmo Card	USB Smart Chip Device	0x1A74	0x6354	0	0xFF	2.00	0x00	0x01	0x0000 0x0002	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	261 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
129	0x00020840	unsupported	OCS ID-One Cosmo Card	USB Smart Chip Device	0x1A74	0x6356	0	0xFF	2.00	0x00	0x01	0x0000 0x0002	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	261 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']	the reader responds with bResponseType not defined in ICCD v1.0 specification. See http://archives.neohapsis.com/archives/dev/muscle/2009-q4/0059.html
130	0x00020840	shouldwork	Philips Semiconductors	SmartMX Sample	0x04B9	0x1400	1	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0002	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	261 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']	used in some SafeNet iKey 4000
131	0x00020840	shouldwork	SMART	SBV280	0x0B8C	0x000E	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0001	3.580 MHz	3.580 MHz	9600 bps	9600 bps	0	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['ICCD']
132	0x00020840	supported	TianYu CCID Key	TianYu CCID SmartKey	0xA625	0x0801	2	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0001	3.580 MHz	3.580 MHz	9600 bps	115200 bps	0	0x00000000	0x00000000	512 bytes	0x00	0x00	0x0000	0x00	1	['ICCD']
133	0x00040042	supported	id3 Semiconductors	Contactless Reader	0x0B81	0x0200	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0002	4.000 MHz	4.000 MHz	106000 bps	847000 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1
134	0x00040042	shouldwork	Validy	TokenA sl vt	0x1CF0	0x0001	2	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0003	3.580 MHz	3.580 MHz	9600 bps	9600 bps	254	0x00000000	0x00000000	1024 bytes	0xFF	0xFF	0x0000	0x00	1
135	0x00040042	shouldwork	id3 Semiconductors	Contactless Reader	0x0B81	0x0220	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0002	4.000 MHz	4.000 MHz	106000 bps	847000 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']
136	0x00040042	shouldwork	id3 Semiconductors	Contactless Reader	0x0B81	0x0200	3	0x0B [Chip Card Interface Device Class (CCID)]	1.10	0x00	0x01	0x0000 0x0002	4.000 MHz	4.000 MHz	106000 bps	847000 bps	254	0x00000000	0x00000000	271 bytes	0xFF	0xFF	0x0000	0x00	1	['contactless']
137	0x000404BA	supported	Precise Biometrics	Precise 200 MC	0x08C3	0x0402	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x03	0x0000 0x0003	4.000 MHz	7.500 MHz	10753 bps	241936 bps	254	0x00000000	0x00000000	65550 bytes	0x00	0x00	0x0000	0x00	1		Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware
138	0x000404BA	supported	Precise Biometrics	Precise 250 MC	0x08C3	0x0401	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x03	0x0000 0x0003	4.000 MHz	7.500 MHz	10753 bps	241936 bps	254	0x00000000	0x00000000	65550 bytes	0x00	0x00	0x0000	0x00	1		Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware
139	0x000406BA	supported	KOBIL	KAAN Advanced	0x0D46	0x3002	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	4.800 MHz	12903 bps	412903 bps	254	0x00000007	0x00000000	432 bytes	0xFF	0xFF	0x0000	0x03	1	['PIN Verification', 'PIN Modification']	Firmware older than 0.37 is bogus
140	0x000406BA	supported	KOBIL	KAAN Base	0x0D46	0x3001	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.800 MHz	4.800 MHz	12903 bps	412903 bps	254	0x00000007	0x00000000	432 bytes	0xFF	0xFF	0x0000	0x00	1		Firwmare older than 0.37 is bogus
141	0x000406BA	supported	KOBIL	KOBIL Class 3 Reader	0x0D46	0x3010	3	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x01	0x0000 0x0003	2.000 MHz	4.000 MHz	10573 bps	344086 bps	254	0x00000000	0x00000000	536 bytes	0xFF	0xFF	0x0210	0x03	1	['PIN Verification', 'PIN Modification']
142	0x000406BA	unsupported	KOBIL Systems	mIDentity XL	0x0D46	0x4001	2	0x0B [Chip Card Interface Device Class (CCID)]	1.00	0x00	0x07	0x0000 0x0003	4.000 MHz	4.000 MHz	10752 bps	250000 bps	254	0x00000000	0x00000000	512 bytes	0xFF	0xFF	0x0000	0x00	1		Time requests are not managed correctly and make the firmware fails. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug.

Generated: Wed Dec 16 13:44:10 2009

Ludovic Rousseau