Click on the column header to sort by that column.
The background color indicates the section of the reader:
| supported | should work | unsupported |
| # | dwProtocols | section | iManufacturer | iProduct | image | idVendor | idProduct | bNumEndpoints | bInterfaceClass | bcdCCID | bMaxSlotIndex | bVoltageSupport | dwDefaultClock | dwMaximumClock | dwDataRate | dwMaxDataRate | dwMaxIFSD | dwSynchProtocols | dwMechanical | dwFeatures | dwMaxCCIDMessageLength | bClassGetResponse | bClassEnveloppe | wLcdLayout | bPINSupport | bMaxCCIDBusySlots | features | note |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 0x0000 0x0001 | shouldwork | ATMEL![]() | AT91SC192192CT-USB ICCD reader | ![]() | 0x03EB | 0x600B | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 2 | 0x0000 0x0001 | shouldwork | ATMEL![]() | AT98SC032CT-USB | ![]() | 0x03EB | 0x6009 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 3 | 0x0000 0x0001 | supported | Gemalto![]() | Smart Enterprise Guardian Secure USB Device | ![]() | 0x08E6 | 0x8000 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 3.580 MHz | 7.500 MHz | 20112 bps | 223200 bps | 252 | 0x00000000 | 0x00000000 | 0x0001007A | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 4 | 0x0000 0x0001 | shouldwork | KEBTechnology![]() | KONA USB SmartCard | ![]() | 0x04CC | 0x5072 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00000840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 5 | 0x0000 0x0001 | shouldwork | SMART![]() | SBV280 | ![]() | 0x0B8C | 0x000E | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 6 | 0x0000 0x0001 | shouldwork | Softforum Co., Ltd![]() | XecureHSM | ![]() | 0x04E8 | 0x0007 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 7 | 0x0000 0x0001 | supported | TianYu CCID Key![]() | TianYu CCID SmartKey | ![]() | 0xA625 | 0x0801 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 115200 bps | 0 | 0x00000000 | 0x00000000 | 0x00020840 | 512 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 8 | 0x0000 0x0001 | shouldwork | SchlumbergerSema![]() | SchlumbergerSema Cyberflex Access | ![]() | 0x0973 | 0x0003 | 0 | 0xFF | 1.10 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00000840 | 256 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 9 | 0x0000 0x0001 | supported | jNet Technology inc.![]() | jToken s1 | ![]() | 0x0483 | 0x2010 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 0 | 0x00000000 | 0x00000000 | 0x00010840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 10 | 0x0000 0x0001 | supported | RSA![]() | RSA SecurID (R) Authenticator | ![]() | 0x15E1 | 0x2007 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x02 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010238 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 11 | 0x0000 0x0002 | unsupported | ACS![]() | ACR122U PICC Interface | ![]() | 0x072F | 0x2200 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 256 | 0x00000000 | 0x00000000 | 0x00020040 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ['contactless'] | Time extension requests are not supported. Firmwares version < 2.06 are bogus: APDU with 0x7B (123) bytes expected do not work with a 14443 card. The reader returns SW=63 00 instead. |
| 12 | 0x0000 0x0002 | shouldwork | Aktiv![]() | Rutoken ECP | ![]() | 0x0A89 | 0x0030 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 13 | 0x0000 0x0002 | shouldwork | Aktiv Co., ProgramPark![]() | Rutoken Magistra | ![]() | 0x0A89 | 0x0060 | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 14 | 0x0000 0x0002 | supported | id3 Semiconductors![]() | Contactless Reader | ![]() | 0x0B81 | 0x0200 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 15 | 0x0000 0x0002 | supported | Gemalto![]() | PDT | ![]() | 0x0973 | 0x1227 | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 16 | 0x0000 0x0002 | shouldwork | Giesecke & Devrient GmbH![]() | Star Sign Card Token 350 (ICCD) | ![]() | 0x1059 | 0x000C | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 280 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 17 | 0x0000 0x0002 | shouldwork | Giesecke & Devrient GmbH![]() | Star Sign Card Token 550 (ICCD) | ![]() | 0x1059 | 0x000D | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 18 | 0x0000 0x0002 | shouldwork | Philips Semiconductors![]() | JCOP41V221 | ![]() | 0x0471 | 0x040F | 0 | 0x0B [Chip Card Interface Device Class (CCID)] | 2.00 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 19 | 0x0000 0x0002 | shouldwork | OCS ID-One Cosmo Card![]() | USB Smart Chip Device | ![]() | 0x1A74 | 0x6354 | 0 | 0xFF | 2.00 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | |
| 20 | 0x0000 0x0002 | unsupported | OCS ID-One Cosmo Card![]() | USB Smart Chip Device | ![]() | 0x1A74 | 0x6356 | 0 | 0xFF | 2.00 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | the reader responds with bResponseType not defined in ICCD v1.0 specification. See http://archives.neohapsis.com/archives/dev/muscle/2009-q4/0059.html |
| 21 | 0x0000 0x0002 | shouldwork | Philips Semiconductors![]() | SmartMX Sample | ![]() | 0x04B9 | 0x1400 | 1 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00020840 | 261 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ICCD'] | used in some SafeNet iKey 4000 |
| 22 | 0x0000 0x0002 | shouldwork | id3 Semiconductors![]() | Contactless Reader | ![]() | 0x0B81 | 0x0220 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 23 | 0x0000 0x0002 | shouldwork | id3 Semiconductors![]() | Contactless Reader | ![]() | 0x0B81 | 0x0200 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 106000 bps | 847000 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 24 | 0x0000 0x0003 | shouldwork | ACS![]() | CCID USB Reader | ![]() | 0x072F | 0x90CC | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 25 | 0x0000 0x0003 | supported | ACS![]() | ACR38 USB Reader | ![]() | 0x072F | 0x90CC | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Old versions of this reader are bogus: the reader do timeout when a special USB frame is sent from the reader. If the frame size is a multiple of wMaxPacketSize the communication is stopped. | |
| 26 | 0x0000 0x0003 | shouldwork | ACS![]() | CCID USB Reader | ![]() | 0x072F | 0x90CC | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 27 | 0x0000 0x0003 | shouldwork | ACS![]() | CCID USB Reader | ![]() | 0x072F | 0x90CC | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344100 bps | 247 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 28 | 0x0000 0x0003 | supported | Athena![]() | ASEDrive CCID | ![]() | 0x0DC3 | 0x1102 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | Firmware older than 6.07 is bogus |
| 29 | 0x0000 0x0003 | supported | Athena![]() | ASEDrive CCID | ![]() | 0x0DC3 | 0x1004 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 333333 bps | 252 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 30 | 0x0000 0x0003 | shouldwork | ATMEL![]() | AT91SO CCID Smart Card Reader | ![]() | 0x03EB | 0x6004 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x07 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 256 | 0x00000000 | 0x00000000 | 0x0002005E | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x00 | 1 | ||
| 31 | 0x0000 0x0003 | supported | Alcor Micro![]() | AU9520 | ![]() | 0x058F | 0x9520 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Firmware 1.01 is bogus. The time request sent by the card is not forwarded by the reader to the host. | |
| 32 | 0x0000 0x0003 | unsupported | ActivCard![]() | ActivCard USB Reader V2 | ![]() | 0x09C3 | 0x0008 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 9600 bps | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | The reader do timeout when a special USB frame is sent from the reader. If the frame size if a multiple of wMaxPacketSize the communication is stopped. Some users report that this reader is in fact a SCR-331 with a different firmware and that you can upgrade its firmware to transform it into a (supported) SCR-331 reader. | |
| 33 | 0x0000 0x0003 | supported | ActivCard![]() | ActivCard USB Reader V3 | ![]() | 0x09C3 | 0x0013 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 34 | 0x0000 0x0003 | supported | ActivIdentity![]() | Activkey Sim | ![]() | 0x09C3 | 0x0014 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 35 | 0x0000 0x0003 | unsupported | Aladdin![]() | Token JC | ![]() | 0x0529 | 0x0620 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 49 | 0x00000000 | 0x00000000 | 0x0001023C | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The token does not work after a warm reset. See http://www.opensc-project.org/pipermail/opensc-devel/2009-April/012128.html | |
| 36 | 0x0000 0x0003 | shouldwork | Alcor Micro![]() | SCR001 | ![]() | 0x058F | 0x9520 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 37 | 0x0000 0x0003 | supported | COVADIS![]() | ALYA | ![]() | 0x0982 | 0x0007 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 38 | 0x0000 0x0003 | shouldwork | Axalto![]() | Reflex USB v3 | ![]() | 0x04E6 | 0x511C | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 39 | 0x0000 0x0003 | supported | BLUTRONICS![]() | BLUDRIVE II CCID | ![]() | 0x1B0E | 0x1078 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 115200 bps | 252 | 0x00000000 | 0x00000000 | 0x00010130 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 40 | 0x0000 0x0003 | unsupported | Broadcom Corp![]() | 5880 | ![]() | 0x0A5C | 0x5800 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 9600 bps | 250000 bps | 247 | 0x00000000 | 0x00000000 | 0x000102BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | found in Dell E6500 laptop No communication to the device ("Resource temporarily unavailable" error) The reader reports "Hardware error" to GetSlotStatus when no card is present. | |
| 41 | 0x0000 0x0003 | shouldwork | C3PO![]() | USB SMART CARD KEYBOARD | ![]() | 0x0783 | 0x0009 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 42 | 0x0000 0x0003 | shouldwork | C3PO![]() | USB SMART CARD READER | ![]() | 0x0783 | 0x0010 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000007 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 43 | 0x0000 0x0003 | shouldwork | C3PO![]() | USB SMART CARD KEYBOARD | ![]() | 0x0783 | 0x0007 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000001 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 44 | 0x0000 0x0003 | shouldwork | OMNIKEY![]() | CardMan 1021 | ![]() | 0x076B | 0x1021 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 3.692 MHz | 3.692 MHz | 9924 bps | 317591 bps | 254 | 0x00000007 | 0x00000000 | 0x000103B1 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 45 | 0x0000 0x0003 | shouldwork | OMNIKEY AG![]() | CardMan 3021 | ![]() | 0x076B | 0x3021 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 46 | 0x0000 0x0003 | supported | OMNIKEY AG![]() | CardMan 3121 | ![]() | 0x076B | 0x3021 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 3.000 MHz | 12.000 MHz | 8065 bps | 96774 bps | 254 | 0x00000007 | 0x00000000 | 0x000205B2 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 47 | 0x0000 0x0003 | shouldwork | OMNIKEY AG![]() | CardMan 3621 | ![]() | 0x076B | 0x3621 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 48 | 0x0000 0x0003 | shouldwork | OMNIKEY AG![]() | CardMan 3821 | ![]() | 0x076B | 0x3821 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 49 | 0x0000 0x0003 | shouldwork | OMNIKEY![]() | CardMan 4321 | ![]() | 0x076B | 0x4321 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ExpressCard'] | |
| 50 | 0x0000 0x0003 | shouldwork | OMNIKEY AG![]() | CardMan 5121 | ![]() | 0x076B | 0x5121 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | The RFID interface is not supported. |
| 51 | 0x0000 0x0003 | shouldwork | OMNIKEY AG![]() | CardMan 5125 | ![]() | 0x076B | 0x5125 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | The HID PROX interface is not supported. |
| 52 | 0x0000 0x0003 | shouldwork | OMNIKEY![]() | CardMan 5321 | ![]() | 0x076B | 0x5321 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | The RFID interface is not supported. |
| 53 | 0x0000 0x0003 | shouldwork | OMNIKEY AG![]() | CardMan 6121 | ![]() | 0x076B | 0x6622 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 54 | 0x0000 0x0003 | shouldwork | charismathics![]() | plug'n'crypt CCID token | ![]() | 0x19E7 | 0x0002 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 55 | 0x0000 0x0003 | supported | Cherry GmbH![]() | SmartTerminal XX44 | ![]() | 0x046A | 0x002D | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 56 | 0x0000 0x0003 | shouldwork | Cherry GmbH![]() | SmartBoard XX1X | ![]() | 0x046A | 0x005B | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 57 | 0x0000 0x0003 | supported | Cherry GmbH![]() | SmartTerminal ST-2xxx | ![]() | 0x046A | 0x003E | 3 | 0xFF | 1.00 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 58 | 0x0000 0x0003 | shouldwork | Cherry GmbH![]() | SmartTerminal XX1X | ![]() | 0x046A | 0x0070 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 59 | 0x0000 0x0003 | shouldwork | Cherry GmbH![]() | SmartTerminal ST-1275 | ![]() | 0x046A | 0x0072 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.01 | 0x00 | 0x07 | 4.000 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | The contactless interface is not supported. |
| 60 | 0x0000 0x0003 | supported | Cherry GmbH![]() | SmartBoard XX33 | ![]() | 0x046A | 0x0005 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0 | 0 | 0x0000 | 0x01 | 1 | ['PIN Verification'] | |
| 61 | 0x0000 0x0003 | supported | Cherry GmbH![]() | SmartBoard XX44 | ![]() | 0x046A | 0x0010 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 62 | 0x0000 0x0003 | supported | Eutron![]() | CryptoIdentity CCID | ![]() | 0x073D | 0x0007 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 63 | 0x0000 0x0003 | supported | Dell![]() | Dell Smart Card Reader Keyboard | ![]() | 0x413C | 0x2101 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | ['PIN Verification'] | |
| 64 | 0x0000 0x0003 | supported | Dell![]() | Dell USB Smartcard Keyboard | ![]() | 0x413C | 0x2100 | 3 | 0xFF | 1.00 | 0x00 | 0x03 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x01 | 1 | ['PIN Verification'] | |
| 65 | 0x0000 0x0003 | supported | Eutron![]() | CryptoIdentity CCID | ![]() | 0x073D | 0x0008 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 66 | 0x0000 0x0003 | supported | Eutron![]() | Digipass 860 | ![]() | 0x073D | 0x0B00 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 67 | 0x0000 0x0003 | supported | Eutron![]() | Card Reader | ![]() | 0x073D | 0x0C01 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 68 | 0x0000 0x0003 | shouldwork | Feitian![]() | CCID Smart Card 301 | ![]() | 0x096E | 0x0503 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 4.000 MHz | 8.000 MHz | 10752 bps | 600000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 69 | 0x0000 0x0003 | shouldwork | Fujitsu Siemens Computers![]() | SmartCard Keyboard USB 2A | ![]() | 0x0BF8 | 0x1005 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 70 | 0x0000 0x0003 | shouldwork | Fujitsu Siemens Computers![]() | SmartCard USB 2A | ![]() | 0x0BF8 | 0x1006 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 71 | 0x0000 0x0003 | supported | Gemalto![]() | GemCore SIM Pro Smart Card Reader | ![]() | 0x08E6 | 0x3480 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x01 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 72 | 0x0000 0x0003 | supported | Gemalto![]() | Gemplus USB SmartCard Reader 433-Swap | ![]() | 0x08E6 | 0x4433 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00020472 | 271 bytes | 0 | 0 | 0x0000 | 0x00 | 1 | ||
| 73 | 0x0000 0x0003 | supported | Gemalto![]() | USB Shell Token V2 | ![]() | 0x08E6 | 0x3438 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 74 | 0x0000 0x0003 | supported | Gemalto![]() | USB GemPCPinpad SmartCard Reader | ![]() | 0x08E6 | 0x3478 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | Known problems/limitations: Does not support minimum PIN length (wPINMaxExtraDigit) lower than 4 Does not support maximum PIN length (wPINMaxExtraDigit) greater than 8 Does send a VERIFY PIN command with an empty PIN to get the number of remaining trials. This may be problematic with some smart cards like the Belgian eID card that does not support this and will decrement the counter |
| 75 | 0x0000 0x0003 | supported | Gemalto![]() | PC Twin Reader | ![]() | 0x08E6 | 0x3437 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 76 | 0x0000 0x0003 | supported | Gemalto![]() | PC Twin Reader (serial) | ![]() | 0x08E6 | 0x3437 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ['serial'] | |
| 77 | 0x0000 0x0003 | shouldwork | Gemalto![]() | USB GemPC Express | ![]() | 0x08E6 | 0x34EC | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ['ExpressCard'] | |
| 78 | 0x0000 0x0003 | shouldwork | Gemalto![]() | Prox Dual USB PC LinkReader | ![]() | 0x08E6 | 0x5503 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 79 | 0x0000 0x0003 | shouldwork | Gemalto![]() | Prox Dual USB PC LinkReader | ![]() | 0x08E6 | 0x5503 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 278 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 80 | 0x0000 0x0003 | shouldwork | Gemalto![]() | Prox SU USB PC LinkReader | ![]() | 0x08E6 | 0x5504 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 81 | 0x0000 0x0003 | shouldwork | Gemalto![]() | Prox SU USB PC LinkReader | ![]() | 0x08E6 | 0x5504 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00020672 | 278 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 82 | 0x0000 0x0003 | shouldwork | Gemalto![]() | Gem e-Seal Pro USB Token | ![]() | 0x08E6 | 0x2202 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 83 | 0x0000 0x0003 | shouldwork | Hewlett-Packard Company![]() | HP USB Smart Card Keyboard | ![]() | 0x03F0 | 0x1024 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 84 | 0x0000 0x0003 | supported | SCM Microsystems Inc.![]() | HP USB Smartcard Reader | ![]() | 0x03F0 | 0x0824 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 12.000 MHz | 9600 bps | 307200 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 85 | 0x0000 0x0003 | shouldwork | Hewlett Packard![]() | MFP Smart Card Reader | ![]() | 0x03F0 | 0x2924 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 86 | 0x0000 0x0003 | supported | KOBIL![]() | KAAN Advanced | ![]() | 0x0D46 | 0x3002 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 432 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | Firmware older than 0.37 is bogus |
| 87 | 0x0000 0x0003 | supported | KOBIL![]() | KAAN Base | ![]() | 0x0D46 | 0x3001 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000406BA | 432 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Firwmare older than 0.37 is bogus | |
| 88 | 0x0000 0x0003 | supported | KOBIL![]() | KAAN SIM III | ![]() | 0x0D46 | 0x3003 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 4.800 MHz | 12903 bps | 412903 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 89 | 0x0000 0x0003 | supported | KOBIL![]() | KOBIL Class 3 Reader | ![]() | 0x0D46 | 0x3010 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 2.000 MHz | 4.000 MHz | 10573 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 536 bytes | 0xFF | 0xFF | 0x0210 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 90 | 0x0000 0x0003 | unsupported | C3PO![]() | LTC3x USB | ![]() | 0x0783 | 0x0003 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 10752 bps | 10752 bps | 254 | 0x00000000 | 0x00000000 | 0x00010002 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | The reader works fine with Linux kernel 2.4 but does not with Linux kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument). This reader is not more sold and replaced by the LTC31v2 model. | |
| 91 | 0x0000 0x0003 | supported | C3PO![]() | USB SMART CARD READER | ![]() | 0x0783 | 0x0006 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 20.000 MHz | 9600 bps | 230400 bps | 254 | 0x00000001 | 0x00000000 | 0x000100BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | New model with USB product ID 0x0006 | |
| 92 | 0x0000 0x0003 | supported | Lenovo![]() | Integrated Smart Card Reader | ![]() | 0x17EF | 0x1003 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 93 | 0x0000 0x0003 | shouldwork | Generic![]() | USB2.0-CRW | ![]() | 0x0BDA | 0x0161 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 94 | 0x0000 0x0003 | shouldwork | Neowave![]() | Weneo | ![]() | 0x1E0D | 0x8033 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 4.000 MHz | 4.000 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 95 | 0x0000 0x0003 | shouldwork | Neowave![]() | Weneo | ![]() | 0x1E0D | 0x0013 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x02 | 3.570 MHz | 3.570 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 96 | 0x0000 0x0003 | shouldwork | OMNIKEY AG![]() | Smart Card Reader | ![]() | 0x076B | 0xA021 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 3.692 MHz | 3.692 MHz | 9924 bps | 119096 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 97 | 0x0000 0x0003 | shouldwork | O2![]() | O2Micro CCID SC Reader | ![]() | 0x0B97 | 0x7762 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 4.000 MHz | 4.000 MHz | 9600 bps | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops like the Dell D420 or D820. The ATR may be corrupted by a 90 00 at the end | |
| 98 | 0x0000 0x0003 | shouldwork | O2![]() | O2Micro CCID SC Reader | ![]() | 0x0B97 | 0x7772 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 9600 bps | 307200 bps | 254 | 0x00000000 | 0x00000000 | 0x00000030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | This reader is common as an internal reader in laptops. | |
| 99 | 0x0000 0x0003 | shouldwork | Panasonic![]() | Panasonic USB Smart Card Reader 7A-Smart | ![]() | 0x04DA | 0x117A | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 100 | 0x0000 0x0003 | supported | Precise Biometrics![]() | Precise 200 MC | ![]() | 0x08C3 | 0x0402 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 4.000 MHz | 7.500 MHz | 10753 bps | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 65550 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware | |
| 101 | 0x0000 0x0003 | supported | Precise Biometrics![]() | Precise 250 MC | ![]() | 0x08C3 | 0x0401 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 4.000 MHz | 7.500 MHz | 10753 bps | 241936 bps | 254 | 0x00000000 | 0x00000000 | 0x000404BA | 65550 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware | |
| 102 | 0x0000 0x0003 | shouldwork | Raritan![]() | D2CIM-DVUSB VM/CCID | ![]() | 0x14DD | 0x1006 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x00010238 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 103 | 0x0000 0x0003 | unsupported | Reiner-SCT![]() | cyberJack pinpad(a) | ![]() | 0x0C4B | 0x0300 | 3 | 0xFF | 10.00 | 0x00 | 0x07 | 4.000 MHz | 8.000 MHz | 10072 bps | 250000 bps | 254 | 0x00000007 | 0x00000000 | 0x00010030 | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | Time requests are not managed and the driver may time out without any response from the reader. This is not a problem unless you use a time-consuming APDU like RSA key generation. Reiner provides a free software driver for this reader: http://support.reiner-sct.de/ |
| 104 | 0x0000 0x0003 | unsupported | SCM Microsystems Inc.![]() | SCL010 Contactless Reader | ![]() | 0x04E6 | 0x5291 | 3 | 0xFF | 1.10 | 0x00 | 0x01 | 13.560 MHz | 13.560 MHz | 106000 bps | 848000 bps | 254 | 0x00000000 | 0x00000001 | 0x0001007E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 105 | 0x0000 0x0003 | shouldwork | SCM Microsystems Inc.![]() | SCR331-DI USB Smart Card Reader | ![]() | 0x04E6 | 0x5120 | 3 | 0xFF | 1.00 | 0x01 | 0x01 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 255 | 255 | 0x0000 | 0x00 | 1 | ['contactless'] | The contactless interface is not supported. |
| 106 | 0x0000 0x0003 | supported | SCM Microsystems Inc.![]() | SCR331-DI USB Smart Card Reader | ![]() | 0x04E6 | 0x5111 | 3 | 0xFF | 1.00 | 0x01 | 0x01 | 4.000 MHz | 12.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | You have to upgrade the firmware using version 5.18 or later. The contactless interface is not supported. |
| 107 | 0x0000 0x0003 | supported | SCM Microsystems Inc.![]() | SCRx31 USB Smart Card Reader | ![]() | 0x04E6 | 0xE001 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. | |
| 108 | 0x0000 0x0003 | supported | SCM Microsystems Inc.![]() | SCR3310 USB Smart Card Reader | ![]() | 0x04E6 | 0x5116 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 109 | 0x0000 0x0003 | supported | SCM Microsystems Inc.![]() | SCR3311 USB Smart Card Reader | ![]() | 0x04E6 | 0x511D | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 110 | 0x0000 0x0003 | shouldwork | SCM Microsystems Inc.![]() | SCR3320 - Smart Card Reader | ![]() | 0x04E6 | 0x5117 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 111 | 0x0000 0x0003 | shouldwork | SCM Microsystems Inc.![]() | SCR33x USB Smart Card Reader | ![]() | 0x04E6 | 0x5113 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 112 | 0x0000 0x0003 | shouldwork | SCM Microsystems Inc.![]() | SCR3340 - ExpressCard54 Smart Card Reader | ![]() | 0x04E6 | 0x5119 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['ExpressCard'] | |
| 113 | 0x0000 0x0003 | supported | SCM Microsystems Inc.![]() | SCR33x USB Smart Card Reader | ![]() | 0x04E6 | 0x5115 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | You have to upgrade the firmware using version 5.18 or later. | |
| 114 | 0x0000 0x0003 | supported | SCM Microsystems Inc.![]() | SCR35xx USB Smart Card Reader | ![]() | 0x04E6 | 0x5410 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 263 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 115 | 0x0000 0x0003 | shouldwork | SCM Microsystems Inc.![]() | SDI010 Smart Card Reader | ![]() | 0x04E6 | 0x5121 | 3 | 0xFF | 1.10 | 0x01 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 252 | 0x00000000 | 0x00000000 | 0x000100BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | The contactless interface is not supported. |
| 116 | 0x0000 0x0003 | supported | Eutron![]() | SIM Reader | ![]() | 0x073D | 0x0C00 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 344068 bps | 254 | 0x00000000 | 0x00000000 | 0x00010330 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 117 | 0x0000 0x0003 | supported | SCM Microsystems Inc.![]() | SPRx32 USB Smart Card Reader | ![]() | 0x04E6 | 0xE003 | 3 | 0xFF | 1.00 | 0x00 | 0x01 | 4.000 MHz | 8.000 MHz | 10753 bps | 344105 bps | 254 | 0x00000000 | 0x00000000 | 0x000100BA | 270 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | You have to upgrade the firmware using version 5.10 or later. |
| 118 | 0x0000 0x0003 | shouldwork | Sitecom![]() | Sitecom USB simcard reader MD-010 | ![]() | 0x0DF6 | 0x800A | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 119 | 0x0000 0x0003 | shouldwork | SpringCard![]() | CSB6 Basic | ![]() | 0x1C34 | 0x7121 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 120 | 0x0000 0x0003 | shouldwork | SpringCard![]() | CSB6 Secure | ![]() | 0x1C34 | 0x7123 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x02 | 0x03 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 121 | 0x0000 0x0003 | shouldwork | SpringCard![]() | CSB6 Ultimate | ![]() | 0x1C34 | 0x7124 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x04 | 0x03 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 122 | 0x0000 0x0003 | shouldwork | SpringCard![]() | CrazyWriter | ![]() | 0x1C34 | 0x7113 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x02 | 0x03 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 123 | 0x0000 0x0003 | shouldwork | SpringCard![]() | EasyFinger Standard | ![]() | 0x1C34 | 0x7136 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x01 | 0x03 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 124 | 0x0000 0x0003 | shouldwork | SpringCard![]() | EasyFinger Ultimate | ![]() | 0x1C34 | 0x7138 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x03 | 0x03 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 125 | 0x0000 0x0003 | shouldwork | SpringCard![]() | Prox'N'Roll | ![]() | 0x1C34 | 0x7141 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x03 | 3.686 MHz | 13.560 MHz | 9909 bps | 12643980 bps | 254 | 0x00000000 | 0x00000000 | 0x0002047E | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ['contactless'] | |
| 126 | 0x0000 0x0003 | shouldwork | SYNNIX![]() | STD200 | ![]() | 0x1206 | 0x2105 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 127 | 0x0000 0x0003 | supported | XIRING![]() | Teo | ![]() | 0x076B | 0xA022 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.800 MHz | 8.000 MHz | 10752 bps | 412903 bps | 254 | 0x00000007 | 0x00000000 | 0x000207B2 | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 128 | 0x0000 0x0003 | shouldwork | Todos![]() | Argos Mini II | ![]() | 0x0B0C | 0x0050 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 4.000 MHz | 4.000 MHz | 10752 bps | 344086 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | Use at least firmware 1.01. The previous one is bogus. | |
| 129 | 0x0000 0x0003 | shouldwork | VMware![]() | Virtual USB CCID | ![]() | 0x0E0F | 0x0004 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 4.800 MHz | 4.800 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x0002004E | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 130 | 0x0000 0x0003 | shouldwork | Validy![]() | TokenA sl vt | ![]() | 0x1CF0 | 0x0001 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x01 | 3.580 MHz | 3.580 MHz | 9600 bps | 9600 bps | 254 | 0x00000000 | 0x00000000 | 0x00040042 | 1024 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 131 | 0x0000 0x0003 | shouldwork | VASCO![]() | DP905 | ![]() | 0x1A44 | 0x0001 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x03 | 3.700 MHz | 3.700 MHz | 9946 bps | 318280 bps | 254 | 0x00000007 | 0x00000000 | 0x000204BE | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 132 | 0x0000 0x0003 | shouldwork | COVADIS![]() | VEGA-ALPHA | ![]() | 0x0982 | 0x0008 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 500000 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 133 | 0x0000 0x0003 | supported | Verisign![]() | Token GEM USB COMBI-M | ![]() | 0x08E6 | 0x1359 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 134 | 0x0000 0x0003 | supported | Verisign![]() | Token GEM USB COMBI | ![]() | 0x08E6 | 0xACE0 | 2 | 0xFF | 1.00 | 0x00 | 0x01 | 1.500 MHz | 1.500 MHz | 4032 bps | 46875 bps | 254 | 0x00000000 | 0x00000000 | 0x00010230 | 271 bytes | 0 | 0 | 0x0000 | 0x00 | 1 | ||
| 135 | 0x0000 0x0003 | shouldwork | Winbond![]() | CCID SmartCard Controller | ![]() | 0x0416 | 0x3815 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x01 | 3.000 MHz | 3.000 MHz | 8065 bps | 32258 bps | 123 | 0x00000000 | 0x00000000 | 0x000004B2 | 138 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | ||
| 136 | 0x0000 0x0003 | supported | XIRING![]() | XI-SIGN USB V2 | ![]() | 0x0F14 | 0x0011 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 3.600 MHz | 3.600 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x020C | 0x03 | 1 | ['PIN Verification', 'PIN Modification'] | |
| 137 | 0x0000 0x0003 | shouldwork | XIRING![]() | XI-SIGN USB V2 | ![]() | 0x0F14 | 0x0011 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 3.600 MHz | 3.600 MHz | 9600 bps | 115200 bps | 254 | 0x00000000 | 0x00000000 | 0x000204BA | 271 bytes | 0xFF | 0xFF | 0x020C | 0x00 | 1 | ||
| 138 | 0x0000 0x0003 | unsupported | THRC![]() | USB Smart Card Reader | ![]() | 0x062D | 0x0001 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 129032 bps | 254 | 0x00000000 | 0x00000000 | 0x00010138 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | also known as ID-SMID01 and maybe other commercial names PPS fails with a Cryptoflex card Powerup fails with a Setcos card | |
| 139 | 0x0000 0x0003 | shouldwork | Generic![]() | USB2.0-CRW | ![]() | 0x0BDA | 0x0169 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.10 | 0x00 | 0x07 | 3.750 MHz | 7.500 MHz | 10080 bps | 312500 bps | 254 | 0x00000000 | 0x00000000 | 0x00010030 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 | ||
| 140 | 0x0000 0x0003 | unsupported | KOBIL Systems![]() | mIDentity M | ![]() | 0x0D46 | 0x4000 | 3 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000206BA | 271 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Time requests are not managed correctly and make the firmware fails. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | |
| 141 | 0x0000 0x0003 | unsupported | KOBIL Systems![]() | mIDentity XL | ![]() | 0x0D46 | 0x4001 | 2 | 0x0B [Chip Card Interface Device Class (CCID)] | 1.00 | 0x00 | 0x07 | 4.000 MHz | 4.000 MHz | 10752 bps | 250000 bps | 254 | 0x00000000 | 0x00000000 | 0x000406BA | 512 bytes | 0xFF | 0xFF | 0x0000 | 0x00 | 1 | Time requests are not managed correctly and make the firmware fails. This is not a problem unless you use a time-consuming APDU like RSA key generation. A new firmware will correct the bug. | |
| 142 | 0x0000 0x0300 | supported | MYSMART![]() | MySMART PAD V2.0 | ![]() | 0x09BE | 0x0002 | 3 | 0xFF | 1.00 | 0x00 | 0x00 | 1024.000 MHz | 1024.000 MHz | 10752 bps | 129032 bps | 0 | 0x00000000 | 0x03000000 | 0x00010230 | 271 bytes | 0x00 | 0x00 | 0x0000 | 0x00 | 1 |
Generated: Wed Dec 16 13:44:10 2009
Ludovic Rousseau